1. Bubuka
This instruction manual provides essential information for the safe and effective use of your VOLTCRAFT AM-60X46/30V/DC Panel Meter. Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. Émbaran Kasalametan
Awas: Electrical shock hazard. Improper use can result in injury or death. Always observe the following safety precautions:
- Pastikeun catu daya dipegatkeun samemeh dipasang atawa diropéa.
- Ngan tanaga mumpuni kedah ngalakukeun instalasi tur wiring.
- Entong ngalangkungan vol anu ditetepkeuntage rentang 30V DC.
- Entong jalankeun alat upami katingalina ruksak.
- Jaga alat tetep garing sareng jauh tina suhu anu ekstrim.
3. Produk Langkungview
The VOLTCRAFT AM-60X46/30V/DC is a compact analog panel meter designed for measuring DC voltage up to 30V. It features a clear, easy-to-read scale and a robust construction suitable for various applications.
Gambar 1: Hareupeun view of the VOLTCRAFT AM-60X46/30V/DC Panel Meter. This image shows the meter's analog display with a scale from 0 to 30 volts, marked with 'V' for voltage, and the VOLTCRAFT logo. The needle is currently at 0V.
Fitur konci:
- Analog display for direct voltage bacaan.
- Measurement range: 0-30V DC.
- Compact dimensions (60 x 46 mm).
- Pangwangunan awét.
4. Instalasi jeung Setup
Follow these steps for proper installation of your panel meter:
- Pegatkeun daya: Ensure all power to the circuit where the meter will be installed is completely disconnected.
- Potongan Panel: Create an appropriate cutout in your panel for the meter. Refer to the specifications section for exact dimensions (typically 60 x 46 mm).
- Pamasangan: Insert the meter into the cutout from the front. Secure it from the rear using the provided mounting hardware (if applicable).
- Wiring: Connect the meter to the DC voltage source you wish to measure. Observe correct polarity: connect the positive (+) terminal of the meter to the positive side of the circuit, and the negative (-) terminal to the negative side. Incorrect polarity may damage the meter.
- Verifikasi: Double-check all connections for security and correct polarity before restoring power.
5. Parentah Operasi
Once installed and wired correctly, the VOLTCRAFT AM-60X46/30V/DC Panel Meter operates automatically:
- Daya Hurung: Restore power to the circuit. The meter's needle will move to indicate the measured DC voltage.
- Maca Tampilan: Baca voltage value directly from the scale indicated by the needle. The scale ranges from 0 to 30V.
- Nol adjustment: If the needle does not rest precisely on zero when no voltage is applied, use the small screw located at the bottom center of the meter face to carefully adjust it. This adjustment should only be performed when the meter is disconnected from any voltage sumber.
6. Pangropéa
The VOLTCRAFT AM-60X46/30V/DC Panel Meter requires minimal maintenance:
- beberesih: Clean the meter's front panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Pamariksaan: Pariksa sambungan kabel sacara berkala pikeun mastikeun éta aman sareng bébas tina korosi.
- Panyimpenan: If storing the meter, keep it in a dry, dust-free environment within its specified operating temperature range.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Meter needle does not move. | No power to the circuit; incorrect wiring; damaged meter. | Check power supply; verify wiring polarity and connections; replace meter if damaged. |
| Meter shows incorrect reading. | Incorrect wiring; meter not calibrated (rarely needed for analog meters); external interference. | Verify wiring; perform zero adjustment if needle is off at 0V; ensure no strong magnetic fields are nearby. |
| Needle is stuck or erratic. | Physical damage; internal fault. | Inspect for physical damage; if internal fault is suspected, replace the meter. |
8. Spésifikasi
- merek: VOLTCRAFT
- Jumlah modél: AM-60X46/30V/DC
- Tipe pangukuran: DC Voltage
- Rentang pangukuran: 0 - 30 V/DC
- ukuran: 60 x 46 mm (approximate panel cutout size)
- beurat: 44 gram
- Sumber Daya: Manual operation (passive measurement)
- ASIN: B00CS2GZ5C
9. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact VOLTCRAFT customer service directly. Keep your purchase receipt as proof of purchase.
Spare parts availability: 1 Year (as per product information).