ADT Commercial Ice Machine User Manual

Bubuka

Thank you for choosing the ADT Commercial Ice Machine, Model HZB-36F. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new ice maker. Please read this manual thoroughly before operating the appliance and retain it for future reference.

This commercial ice machine is designed to produce up to 80 lbs of clear ice cubes daily, with a storage capacity of 20 lbs. Its compact design allows for flexible installation as an undercounter or freestanding unit.

Émbaran Kasalametan penting

Please read all safety warnings and instructions carefully before use to prevent potential hazards and ensure proper operation.

• Pastikeun alatna dibumikeun leres.
• Ulah ngoperasikeun mesin és nalika kabel listrik atanapi colokanna rusak.
• Tetep bukaan ventilasi jelas tina halangan.
• Ulah nyimpen bahan ngabeledug sapertos kaléng aerosol kalayan propelan anu gampang kaduruk dina alat ieu.
• Perkakas ieu dimaksudkeun pikeun pamakéan komérsial.
• Salawasna pegatkeun sambungan catu daya saméméh meresihan atawa ngalakukeun pangropéa.
• If your drain outlet height is more than 5.9 inches, a drain pump must be configured. The drain outlet should be no further than 12 inches from the ice machine. Failure to do so may result in water leakage.

Produk Leuwihview

The ADT Commercial Ice Machine HZB-36F features a durable stainless steel exterior and an intuitive LCD control panel for ease of use.

Fitur konci:

• Nyieun És Gancang: Produces 40 clear ice cubes per cycle in 11-20 minutes, with a daily output of up to 80 lbs. Each cube weighs 9g.
• Instalasi fléksibel: Dimensions of 14.96"W x 19.29"D x 33.85"H (including 1.18" adjustable feet) allow for undercounter or freestanding placement. Features a front breathing design.
• Layar LCD: User-friendly control panel for power, delay, cleaning, and ice cube size adjustments.
• Desain awét: Stainless steel door with a full-length handle and bright blue LED interior lighting.

Setup sareng Instalasi

Proper installation is crucial for the performance and longevity of your ice machine. Please follow these steps carefully.

Ngabongkar bungkusan:

1. Taliti miceun sadaya bahan bungkusan.
2. Inspect the ice machine for any shipping damage. Report any damage to your supplier immediately.
3. Ensure all accessories are present: Ice Scoop, In-Line Hose, Drain Hose.

Syarat lokasi:

• Place the ice machine on a flat, stable surface.
• Ensure adequate ventilation around the unit. The front breathing design allows for built-in installation, but clearances should still be maintained as per local codes.
• Hindarkeun sinar panonpoé langsung atanapi sumber panas.
• The ambient temperature should be between 50°F (10°C) and 90°F (32°C).

Sambungan Cai sareng Solokan:

1. Connect the supplied in-line hose to a potable water supply. Ensure the water pressure is within the recommended range (15-80 PSI).
2. Sambungkeun selang solokan ka solokan anu cocog. penting: If your drain outlet height is more than 5.9 inches, or if the drain outlet is further than 12 inches from the ice machine, a separate drain pump kudu be installed. This unit does not include a built-in drain pump.
3. Pastikeun sadaya sambungan aman sareng bebas bocor.

Sambungan listrik:

• Plug the ice machine into a dedicated, grounded 115V AC outlet.
• Ulah make kabel extension atawa colokan adaptor.

Parentah Operasi

Familiarize yourself with the control panel and basic operations.

Control Panel (Refer to Figure 3):

• Tombol Daya (ON/OFF): Pencét pikeun ngaktipkeun atanapi mareuman unit.
• Setélan Timer: Allows you to set a time for the unit to turn on or off automatically.
• Ice Making Time Adjustment (+/-): Increase or decrease the ice making time to adjust ice cube size. Longer time results in larger cubes.
• Fungsi Bersih: Press and hold the power button for automatic cleaning.

Operasi awal:

1. After connecting water and power, press the Power button to turn on the unit.
2. The ice making process will begin automatically. The first few cycles may produce smaller or irregular ice cubes. This is normal.
3. Allow the unit to run for several hours to stabilize ice production.

Ice Making Reservation:

The unit supports setting a reservation time for ice making, allowing you to schedule when the ice production starts or stops.

Pangropéa jeung beberesih

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your ice machine.

Pangropéa poéan:

• Ngusap handap luar ku lemes, damp lawon.
• Ensure the ice scoop is clean and stored hygienically.

Beberesih Mingguan/Dua Mingguan:

• Empty the ice storage bin and clean it with a mild detergent and warm water. Rinse thoroughly.
• Clean the water reservoir and ice making components.

Fungsi beberesih otomatis:

The ice machine is equipped with an auto-cleaning feature for convenience.

1. Pastikeun wadah ésna kosong.
2. Add a small amount of ice machine cleaner (food-grade) to the water reservoir as per cleaner instructions.
3. Press and hold the "Clean" button (often integrated with the Power button, refer to Figure 3) to activate the auto-cleaning cycle.
4. Once the cycle is complete, drain the cleaning solution and rinse the unit thoroughly with fresh water by running several ice-making cycles and discarding the ice.

Beberesih kondensor:

Periodically clean the condenser coils to ensure efficient operation. This should be done by a qualified technician or by following specific instructions in a more detailed service manual.

Pamérésan masalah

Sateuacan ngahubungi layanan palanggan, mangga tingal tabel di handap ieu pikeun masalah umum sareng solusina.

spésifikasi

Garansi sarta Rojongan Palanggan

For warranty information, please refer to the warranty card included with your product or contact ADT customer support directly. Keep your proof of purchase for any warranty claims.

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact ADT customer support. Contact details can typically be found on the manufacturer's websitus atanapi dina bungkusan produk.

For the latest information and support, please visit the official ADT websitus atanapi ngahubungan garis layanan palanggan maranéhanana.