Electro-Harmonix Small Clone EH 4600 Analog Chorus Pedal User Manual

Bubuka

The Electro-Harmonix Small Clone Analog Chorus Pedal is designed to produce lush, shimmering chorus tones. This pedal is renowned for its rich, warm analog sound, making it a valuable tool for guitarists seeking classic modulation effects. It offers a range of chorus effects from subtle shimmer to dramatic, swirling modulation, suitable for various musical styles.

Key features include true bypass for signal integrity, a 9V battery for power, and a pure analog circuit for authentic tone.

Naon dina Box

• Electro-Harmonix Small Clone EH 4600 Analog Chorus Pedal
• batré 9V

Disetél

Powering nu Pedal

The Small Clone EH 4600 can be powered by a 9V battery (included) or an optional 9V DC power adapter (not included). To install the battery, remove the bottom plate of the pedal.

Sambungan

The pedal features standard 1/4 inch (6.35mm) audio jacks for input and output.

1. Connect your guitar or other instrument to the INPUT dongkrak di sisi katuhu pedal.
2. Nyambungkeun OUTPUT dongkrak di sisi kénca pedal ka anjeun amplifier or the input of another effects pedal.

Parentah Operasi

The Small Clone EH 4600 features simple controls for easy tone shaping.

Kadali

• Knob RATE: This knob controls the speed of the chorus effect. Turning it clockwise increases the speed, while turning it counter-clockwise decreases it.
• DEPTH Switch: This switch controls the intensity or width of the chorus effect. The up position provides a deeper, more pronounced chorus, while the down position offers a more subtle effect.
• LED STATUS: Indicates when the effect is active.
• KUKUH: Engages or bypasses the effect. The pedal features true bypass, ensuring your instrument's tone remains unaffected when the pedal is disengaged.

Video Produk Resmi

Pangropéa

To ensure optimal performance and longevity of your Small Clone EH 4600 pedal, follow these simple maintenance guidelines:

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun bagian luar pedal. Ulah nganggo pembersih atanapi pelarut anu abrasif.
• Ngagantian batré: If using battery power, replace the 9V battery when the STATUS LED dims or the effect performance degrades. To replace, carefully remove the four screws on the bottom plate, replace the battery, and reattach the plate.
• Panyimpenan: Simpen pedal di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim nalika henteu dianggo.

Pamérésan masalah

If you encounter issues with your Small Clone EH 4600, try the following steps:

• Henteu aya sora: Check all cable connections. Ensure the power supply (battery or adapter) is functioning correctly. Verify that your instrument and amplifier are working.
• Weak or Distorted Effect: Replace the 9V battery if it's low. Ensure all cables are fully inserted and not damaged.
• Noise nu teu dihoyongkeun: Try using a different power supply or a fresh battery. Ensure the pedal is not placed too close to other electronic devices that might cause interference.

spésifikasi

Garansi & Rojongan

For warranty information, technical support, or further inquiries, please visit the official Electro-Harmonix store or contact their customer service directly.

Anjeun tiasa mendakan langkung seueur inpormasi sareng dukungan dina Toko Electro-Harmonix.