TecTake Universal McPherson Strut Spring Compressor Instruction Manual

1. Produk Langkungview

This manual provides essential instructions for the safe and effective use of your TecTake Universal McPherson Strut Spring Compressor. This professional kit is designed for the simple and reliable assembly and disassembly of chassis springs, whether you are replacing shock absorbers, strut bearings, or lowering your vehicle with a sport chassis or adjustable coilover suspension.

The tool is suitable for springs with a diameter of 80 - 190 mm and features a robust steel construction for durability and safety.

2. Parentah Kasalametan

WARNING! For safety reasons, this tool must only be used by specially trained personnel with knowledge of chassis systems. Improper use can lead to serious injury or damage to property.

• Salawasna nganggo alat pelindung pribadi anu pas, kalebet kacamata sareng sarung tangan.
• Ensure the vehicle is securely supported on jack stands before beginning any work on the suspension.
• Never use damaged or modified components of the spring compressor. Inspect all parts before each use.
• Ensure the spring cups are correctly seated and securely gripping the spring coils before applying compression.
• Do not exceed the maximum opening of 300 mm.
• Apply compression gradually and evenly.
• Keep hands and other body parts clear of the spring and compressor mechanism during operation.
• Lubricate the main spindle regularly to ensure smooth operation and prevent wear.
• Store the tool in its transport case in a dry, secure place when not in use.

3. Eusi Paket

The TecTake Universal McPherson Strut Spring Compressor kit includes the following components, neatly organized in a practical transport case:

• 1x Universal McPherson Spring Compressor main unit
• 1x Spacer (30 mm offset for conical base springs)
• 3x Pairs of Spring Cups for various spring diameters:
  • 1 pair for 80 - 110 mm diameter springs
  • 1 pair for 105 - 145 mm diameter springs
  • 1 pair for 145 - 190 mm diameter springs
• 1x Practical Transport Case

Image 1: All components of the TecTake spring compressor kit, including the main compressor unit, three pairs of spring cups, a spacer, and the red transport case.

4. Spésifikasi

5. Setélan

1. Buka bungkusan sareng mariksa: Carefully remove all components from the transport case. Inspect each part for any signs of damage or wear. Do not use the tool if any part is damaged.
2. Lubricate: Apply a suitable lubricant to the main threaded rod of the compressor unit. This ensures smooth operation and extends the life of the tool.
3. Select Correct Cups: Identify the appropriate pair of spring cups based on the diameter of the spring you intend to compress. The kit includes three sizes: 80-110 mm, 105-145 mm, and 145-190 mm.
4. Attach Cups: Securely attach the selected spring cups to the compressor arms. Ensure they are firmly bolted or clipped into place according to the design of the compressor.

Image 2: The TecTake spring compressor kit in its red transport case, ready for use.

6. Parentah Operasi

Follow these steps carefully to safely compress and decompress vehicle springs:

1. Nyiapkeun Kendaraan: Lift the vehicle and secure it on jack stands. Remove the wheel and any other components necessary to access the strut assembly.
2. Position the Compressor: Place the spring compressor onto the spring. Ensure that the selected spring cups are positioned on opposing coils of the spring, gripping them firmly and evenly. The cups should be as far apart as possible on the spring for maximum stability.
3. Pariksa alignment: Verify that the compressor is centered on the spring and that the cups are securely seated. Misalignment can cause the spring to slip, leading to dangerous situations.
4. Kompres Pegas: Using a ratchet or a 21 mm open-end wrench, slowly and gradually turn the main spindle of the compressor. Alternate between the two sides of the compressor if applicable, or ensure even compression if it's a single-spindle design. Observe the spring carefully as it compresses. Stop compressing once the spring tension is relieved from the strut assembly.
5. Remove the Strut Components: Once the spring is safely compressed, you can proceed to disassemble the strut assembly, such as removing the top nut, shock absorber, or strut bearing.
6. Pasang Komponén Anyar: Place the new shock absorber, spring, or other components onto the strut assembly.
7. Decompress the Spring: Carefully position the compressed spring onto the new strut assembly. Ensure it is correctly seated. Slowly and gradually release the tension on the spring by turning the main spindle in the opposite direction. Ensure the spring expands evenly and seats correctly in its mounts.
8. Remove Compressor: Once the spring is fully decompressed and securely seated, remove the spring compressor from the strut assembly.
9. Pasang deui Kendaraan: Reassemble the remaining vehicle components and lower the vehicle.

Note: If using the 30 mm offset spacer for conical base springs, ensure it is correctly installed to provide proper clearance and support.

7. Pangropéa

• beberesih: After each use, clean the compressor and all accessories to remove dirt, grease, and debris.
• Lubrication: Regularly lubricate the main threaded rod and moving parts with appropriate grease to prevent rust and ensure smooth operation.
• Pamariksaan: Periodically inspect all components for signs of wear, cracks, bends, or other damage. Pay close attention to the spring cups and the threaded rod. Replace any damaged parts immediately.
• Panyimpenan: Store the spring compressor and its accessories in the provided transport case in a dry, clean, and secure environment, away from moisture and extreme temperatures.

8. Cara ngungkulan

Upami anjeun ngalaman masalah nalika operasi, pertimbangkeun hal-hal ieu:

• Difficulty in Compression: Ensure the main spindle is adequately lubricated. Check that the spring cups are correctly seated and not binding.
• Spring Slippage: Immediately stop operation. Re-evaluate the placement of the spring cups. They must grip the spring coils securely and evenly. Ensure the correct size cups are used for the spring diameter.
• Sora anu teu biasa: Stop operation and inspect the tool for any loose or damaged parts. Do not proceed until the cause is identified and rectified.

For issues not covered here, consult a qualified automotive technician.

9. Garansi jeung Rojongan

For warranty information, technical support, or to inquire about replacement parts, please refer to the official TecTake websitus atanapi ngahubungan pangecér Anjeun. Simpen resi pameseran anjeun salaku bukti pameseran.

No official product videos were found for this item in the provided data.