AIRAM 79W 80mm Linear Halogen Bulb Instruction Manual

1. Bubuka

This manual provides essential instructions for the safe installation, operation, and maintenance of your AIRAM 79W 80mm Linear Halogen Bulb. Please read this manual thoroughly before use and retain it for future reference.

2. Émbaran Kasalametan

Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan:

• Pareum listrik: Always ensure the power supply to the fixture is switched off at the mains before installing, removing, or cleaning the bulb.
• Tenang: Allow the bulb to cool completely before handling. Halogen bulbs operate at high temperatures and can cause severe burns.
• Penanganan anu leres: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves.
• Correct Wattage: Use only bulbs with the correct wattage jeung voltage for your fixture. Exceeding the maximum wattage tiasa nyababkeun panas teuing sareng kahuruan.
• pembuangan: Buang bohlam anu dipaké nurutkeun peraturan lokal.
• Pamakéan jero rohangan: This bulb is designed for indoor use unless specified otherwise by the fixture.

3. Produk Langkungview

The AIRAM 79W 80mm Linear Halogen Bulb is an energy-efficient light source designed for various lighting applications. It provides a warm white light with a luminous flux of 1000 lumens, equivalent to a 100-watt incandescent bulb. Its linear design and R7s base make it suitable for specific linear halogen fixtures.

Image: A clear glass linear halogen bulb with white ceramic R7s end caps. The bulb features a filament running through its center and is designed for specific fixtures requiring an 80mm linear bulb.

4. Setup jeung Instalasi

Follow these steps to safely install your linear halogen bulb:

1. Pareuman Daya: Locate the light fixture's power switch and turn it off. For added safety, switch off the circuit breaker supplying power to the fixture.
2. Ngidinan Cooling: If replacing an old bulb, wait for it to cool down completely before touching it.
3. Cabut Bulb Old (upami aya): Carefully remove the old bulb from the fixture. Linear halogen bulbs typically have spring-loaded contacts. Gently push one end of the bulb towards the opposite contact and then pull it out.
4. Selapkeun Bohlam Anyar: Holding the new AIRAM bulb with a clean cloth or gloves, align one end of the bulb with one of the R7s contacts in the fixture. Gently push the bulb towards that contact, compressing the spring, and then guide the other end into the opposite contact. Ensure both ends are securely seated.
5. Mulangkeun Daya: Once the bulb is securely in place, restore power to the fixture at the circuit breaker and then turn on the light switch.

5. Parentah Operasi

The AIRAM 79W 80mm Linear Halogen Bulb operates immediately upon receiving power. Simply use the light switch connected to your fixture to turn the bulb on or off. No special operating procedures are required.

6. Pangropéa

Minimal maintenance is required for your halogen bulb:

• beberesih: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners.
• ngagantian: Replace the bulb when it reaches the end of its lifespan or fails. Refer to the installation section for replacement instructions.

7. Cara ngungkulan

If your AIRAM halogen bulb is not functioning correctly, consider the following:

• Bohlam teu hurung:
  • Pariksa naha saklar listrik hurung.
  • Pariksa yén circuit breaker pikeun fixture teu tripped.
  • Ensure the bulb is correctly and securely seated in the fixture's contacts.
  • The bulb may have reached the end of its life and needs replacement.
• Lampu kedip-kedip:
  • Check for loose connections in the fixture or bulb contacts.
  • Ensure the bulb is fully compatible with any dimmer switches in use.

Upami masalah tetep saatos mariksa titik-titik ieu, konsultasi ka tukang listrik anu mumpuni.

8. Spésifikasi

9. Garansi jeung Rojongan

Kanggo inpormasi garansi atanapi dukungan téknis, mangga tingal ka padagang atanapi produsén resmi websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.