Bubuka
The Extech PRC30 is a handheld multifunction process calibrator designed for verifying the operation of various industrial instruments. It is suitable for use with sensors, thermocouple probes, controllers, panel meters, and other testing tools, particularly in temperature control and process troubleshooting applications.
Gambar 1: Hareupeun view of the Extech PRC30 Multifunction Process Calibrator, highlighting its display and control panel.
Fitur produk
- Multifunction capability for various process calibration tasks.
- Handheld design for portability and ease of use.
- Dot matrix LCD for clear display of readings and settings.
- Intuitive button layout for operation.
Disetél
Pamasangan batré
- Panggihan panutup kompartemen batré di bagian tukang alat.
- Open the cover by sliding or unscrewing it as indicated.
- Insert the required batteries (type not specified, but typically AA or AAA) ensuring correct polarity.
- Ganti panutup kompartemen batré aman.
Parentah Operasi
Kadali sareng tampilanview
The Extech PRC30 features a clear dot matrix LCD and a user-friendly control panel. Refer to Figure 1 for button locations.
- Power Button (Orange, circular with power symbol): Press to turn the calibrator ON or OFF.
- Tombol Panah (Luhur, Handap, Kénca, Katuhu): Used for navigation, adjusting values, and selecting options.
- Tombol SET: Ngonfirmasi pilihan atanapi asup ka menu setelan.
- UNIT Button (under TYPE): Changes the measurement unit (e.g., °F, °C).
- I/O Button (under MODE): Toggles between input and output modes.
- MEM Button (under STEP): Accesses memory functions, such as saving or recalling data.
- ZERO Button (under ZERO, with lightbulb symbol): Performs zero adjustment or backlight control.
- CJC (Cold Junction Compensation) Indicator: Indicates the status of cold junction compensation.
- APO (Auto Power Off) Indicator: Shows if the auto power off function is active.
- SOURCE Indicator: Indicates the device is in source mode.
- MEM.25 Indicator: Likely indicates a memory location or a specific memory function.
Operasi Dasar
- Daya Hurung: Press the orange power button. The display will illuminate.
- Pilihan Mode: Use the MODE (I/O) button to switch between input and output functions as required for your calibration task.
- Nyaluyukeun nilai: Use the Up/Down arrow buttons to adjust output values or navigate through menu options. The Left/Right arrow buttons may be used for digit selection or fine-tuning.
- Ngarobah Unit: Press the UNIT button to cycle through available measurement units (e.g., °F, °C).
- Nol adjustment: Use the ZERO button to perform a zero adjustment for current measurements or to activate the display backlight.
- Fungsi mémori: Press the MEM button to save current readings or recall previously stored data.
- Pareum listrik: Press and hold the orange power button until the display turns off. The Auto Power Off (APO) function will also turn off the device after a period of inactivity.
Pangropéa
- beberesih: Ngusap alat ku lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Panyimpenan: Store the calibrator in a dry, cool environment when not in use. Remove batteries if storing for extended periods to prevent leakage.
- Ngagantian batré: Ganti batréna gancang-gancang nalika indikator batré lemah némbongan dina layar pikeun mastikeun operasi anu akurat.
- Kalibrasi: Kalibrasi rutin ku tanaga anu mumpuni disarankeun pikeun ngajaga akurasi pangukuran.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung. | Batré paéh atawa salah dipasang. | Pariksa polaritasna batré sareng ganti ku batré énggal. |
| Bacaan teu akurat. | Needs calibration; environmental interference; incorrect settings. | Perform zero adjustment; ensure stable environment; verify measurement settings; consider professional calibration. |
| Pintonan kosong atanapi taram. | batré lemah; lampu tukang pareum. | Replace batteries; press the ZERO button to activate backlight. |
spésifikasi
- model: PRC30
- Katerangan: Multifungsi Prosés Calibrator
- Jenis tampilan: LCD dot matrix
- Ukuran (Panjang x Lebar x Jangkungna): 6.375 inci (15.9 cm) x 3.25 inci (8 cm) x 1.75 inci (4.4 cm)
- Kisaran Suhu Operasi: 41 nepi ka 104 ° F (5 nepi ka 40 ° C)
- Kisaran Kalembaban Operasi: <80%RH
- Sumber Daya: Batré
- Asal: Dijieun di Taiwan
Garansi sareng Rojongan
The Extech PRC30 Multifunction Process Calibrator comes with a 1-Year Universal Guarantee.
For technical support, service, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official Extech Instruments websitus.
