Bubuka
This manual provides essential instructions for the safe and effective use of your PRESTO 16 Quart Aluminum Pressure Canner, Model PRESTO-01755. Please read all instructions carefully before operating the appliance to ensure proper function and safety.
Émbaran Kasalametan penting
PERHATOSAN: Gagal nuturkeun parentah kaamanan ieu bisa ngakibatkeun tatu serius atawa karuksakan harta.
- Always read and understand the entire instruction manual before use.
- Do not operate the pressure canner without sufficient liquid inside.
- Ensure the lid is properly locked before applying heat.
- Never force the lid open while the canner is pressurized.
- Allow the canner to cool and depressurize naturally before opening.
- Keep hands and face away from the vent pipe and pressure regulator during operation.
- Use caution when handling hot surfaces. Always use oven mitts or heat-resistant gloves.
- Produk ieu ngandung bahan kimia anu dipikanyaho ku Nagara California pikeun nyababkeun kanker sareng cacad kalahiran atanapi cilaka réproduktif anu sanés (Peringatan Proposisi 65).
- Stove Compatibility: This canner is designed for use on gas, electric coil, and smooth-top ranges. For glass-top stoves, consult your stove manufacturer's guidelines regarding the use of large-diameter canners. Some glass-top stoves may pulse burners at high heat, which can affect canning safety by causing temperature fluctuations. Ensure your stove can maintain consistent high heat for canning.
Komponén Langkungview
Familiarize yourself with the main components of your pressure canner:

- Canner Body: The main aluminum pot.
- tutup: Seals the canner during operation.
- Gauge tekanan: Displays the internal pressure in pounds per square inch (PSI).
- Vent hawa / Konci Panutup: Releases air during venting and acts as a safety lock.
- Pipa Ventilasi: Where the pressure regulator is placed.
- Regulator tekanan: Maintains desired pressure by rocking gently.
- Sealing Ring (Gasket): Creates an airtight seal between the lid and the body.
- cecekelan: For safe handling of the canner.
Setup jeung pamakéan munggaran
- Ngabongkar bungkusan: Carefully remove all components from the packaging. Retain packaging for future storage if desired.
- Bersihan awal: Wash the canner body, lid, and all removable parts (sealing ring, pressure regulator, etc.) in warm, soapy water. Rinse thoroughly and dry.
- Mariksa komponén: Check the sealing ring for any cracks or damage. Ensure the vent pipe is clear and free of obstructions.
- ngumpul: Place the sealing ring securely into the lid groove. Ensure the pressure gauge is firmly attached.
- Water Test (First Use Only): Before canning food, perform a water test to familiarize yourself with the canner's operation and to ensure all parts are functioning correctly.
- Add 2-3 quarts of water to the canner.
- Place the lid on the canner, aligning the arrows on the lid and body. Rotate the lid clockwise until the handles are aligned and the lid is securely locked.
- Place the canner on a burner and heat on high.
- Allow steam to escape steadily from the vent pipe for 10 minutes to exhaust air.
- Place the pressure regulator on the vent pipe.
- Continue heating until the pressure gauge indicates 10 PSI.
- Reduce heat to maintain a steady 10 PSI. Hold for 5 minutes.
- Remove the canner from heat and allow it to cool naturally until the pressure gauge reads zero.
- Remove the pressure regulator and wait 2 minutes.
- Buka konci sareng cabut tutupna.
Operating Instructions for Pressure Canning
Always refer to a tested canning recipe for specific processing times and pressure levels for your food items.
- Prepare Jars and Food: Wash and sterilize canning jars. Prepare food according to your chosen recipe.
- Add Water to Canner: Place the canning rack in the bottom of the canner. Add 2-3 inches of hot water to the canner. For longer processing times, more water may be needed.
- Muatkeun Stoples: Carefully place filled, lidded jars onto the canning rack. Ensure jars do not touch each other or the sides of the canner.
- Tutup Aman: Place the canner lid on the body, aligning the arrows. Rotate the lid clockwise until it locks securely.
- Vent Canner: Place the canner on a high heat burner. Allow steam to escape steadily from the vent pipe for 10 minutes. This step is crucial to remove all air from the canner, which could interfere with accurate pressure readings.
- Apply Pressure Regulator: After venting for 10 minutes, place the pressure regulator on the vent pipe.
- Reach Desired Pressure: Continue heating on high until the pressure gauge indicates the desired PSI (as specified by your recipe).
- Ngajaga tekanan: Once the desired pressure is reached, reduce the heat to the lowest setting that maintains a steady pressure. The pressure regulator should rock gently and consistently. Adjust heat as necessary.
- Kadaharan Olahan: Maintain the specified pressure for the duration indicated in your recipe.
- Tenang: After the processing time is complete, turn off the heat. Allow the canner to cool naturally and completely until the pressure gauge reads zero. Do not attempt to cool the canner rapidly with water.
- Depressurize: Once the pressure gauge reads zero, wait 2 minutes. Then, carefully remove the pressure regulator.
- Open Canner: Wait another 5-10 minutes after removing the regulator. Unlock and remove the lid, tilting it away from your face to allow any remaining steam to escape.
- Remove Jars: Using a jar lifter, carefully remove the hot jars and place them on a towel-lined surface, allowing them to cool undisturbed for 12-24 hours.
Pangropéa jeung beberesih
- beberesih: The canner body and lid are dishwasher safe. For best results and to prevent discoloration, hand wash with warm, soapy water. Do not use abrasive cleaners or steel wool.
- Ring Sealing: Remove the sealing ring from the lid after each use for thorough cleaning. Inspect it for cracks, tears, or hardening. Replace if damaged or if it loses elasticity.
- Pipa Ventilasi: Ensure the vent pipe is always clear. Use a small brush or pipe cleaner if necessary to remove any food particles.
- Gauge tekanan: The pressure gauge should not be submerged in water. Wipe clean with a damp lawon.
- Panyimpenan: Store the canner with the lid inverted on the body to allow air circulation and prevent the sealing ring from compressing permanently.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Tekanan teu ngawangun | Lid not sealed properly; insufficient heat; sealing ring damaged; vent pipe blocked. | Ensure lid is locked; increase heat; inspect/replace sealing ring; clear vent pipe. |
| Uap bocor tina tutupna | Lid not sealed properly; sealing ring damaged or dirty; canner rim dirty. | Relock lid; clean/replace sealing ring; clean canner rim. |
| Pressure fluctuates excessively | Heat source too high or too low; stove burner cycling (glass top). | Adjust heat gradually; ensure stove is suitable for canning. |
| Alat ukur tekanan teu akurat | Gauge needs calibration or replacement. | Contact Presto customer service for gauge testing or replacement. |
spésifikasi
- model: PRESTO-01755
- Kapasitas: 16 Kwartir
- Bahan: alumunium
- warna: pérak
- Modeu operasi: Manual
- Dishwasher Aman: Sumuhun
- Beurat barang: 11.71 pon
- Ukuran Paket: 15.63 x 15.39 x 13.07 inci
- UPC: 172302702002
Garansi sareng Rojongan
For warranty information, replacement parts, or further assistance, please contact Presto customer service. Keep your purchase receipt for warranty claims.
Anjeun biasana tiasa mendakan inpormasi kontak dina resmi produsén websitus atawa ngaliwatan pangecér mana produk ieu dibeuli.
Pabrikan: PRESTO





