Bubuka
This manual provides essential instructions for the installation, operation, and maintenance of your BWT CR10 NA 10" Carbon & Resin Cartridge. Please read this manual thoroughly before installation and retain it for future reference.
Produk Leuwihview
The BWT CR10 is a specialized carbon and resin cartridge designed for water filtration systems. It is engineered to fit standard BWT NDL2 filter housings. This cartridge effectively reduces chlorine, organic chemicals, and helps in minimizing scale and scum formation in water.
Fitur konci:
- Ngurangan klorin: Significantly reduces chlorine content in water.
- Organic Chemical Removal: Filters out various organic chemicals for improved water quality.
- Scale and Scum Control: Aids in reducing the buildup of scale and scum.
- Standar Pas: Designed to fit BWT NDL2 filter housings.
spésifikasi
| Spésifikasi | Rincian |
|---|---|
| Nomer modél | CR10 |
| Laju Aliran Nominal | Approx. 4 litres/min |
| Kapasitas Filter | Kira-kira. 1500 ltr |
| Suhu cai maksimum | 45 derajat C |
| Tekanan Maksimum | 5 bar |
| Métode Pamasangan | Plumbed |
| Item Beurat | 1.5 pon |
| Bahan | MULTI CR10 Plastic |
| Diaméterna dirakit | 63 milimeter |
Setup sareng Instalasi
penting: Installation should be performed by a qualified professional or someone with adequate plumbing experience. Always shut off the main water supply before beginning installation.
- Nyiapkeun Sistim: Turn off the main water supply to the area where the filter housing is located. Open a nearby faucet to relieve pressure in the lines.
- Access Filter Housing: Locate your BWT NDL2 filter housing. Depending on your setup, you may need a filter wrench to open the housing.
- Cabut Cartridge Old (upami aya): Carefully unscrew the filter housing sump. Remove the old cartridge and dispose of it properly.
- Perumahan bersih: Clean the inside of the filter housing sump with warm, soapy water and rinse thoroughly. Inspect the O-ring for any damage; replace if necessary. Lubricate the O-ring with a food-grade silicone grease if recommended by the housing manufacturer.
- Selapkeun Cartridge Anyar: Unwrap the new BWT CR10 cartridge. Insert the cartridge into the filter housing, ensuring it is seated correctly in the center standpipe.
- Pasang deui wadahna: Carefully screw the filter housing sump back onto the cap. Hand-tighten first, then use a filter wrench for a snug fit. Ulah overighten.
- Mulangkeun suplai cai: Slowly turn on the main water supply. Check for leaks around the filter housing.
- Sistim siram: Open a nearby cold water faucet and allow water to run for several minutes (e.g., 5-10 minutes) to flush out any air and fine carbon particles from the new cartridge. The water may appear cloudy initially; this is normal and will clear.
Gambar 1: Hareupeun view of the BWT CR10 filter cartridge, showing its cylindrical shape and blue color.
Parentah Operasi
Once installed and flushed, the BWT CR10 cartridge operates automatically as water flows through your filtration system. No further user interaction is required for its daily function.
- Ensure the water pressure remains within the specified limits (Maximum Pressure: 5 Bars).
- The cartridge is designed for cold water applications; do not exceed the maximum water temperature of 45 degrees C.
Gambar 2: Angled view of the BWT CR10 filter cartridge, highlighting its overall form factor.
Pangropéa
Regular replacement of the BWT CR10 cartridge is crucial to maintain optimal water quality and system performance.
- Frékuénsi ngagantian: It is recommended that cartridges be changed at least every 3 nepi ka 6 bulan, or after approximately 1500 ltr of filtered water, whichever comes first. This frequency may vary depending on local water quality and usage.
- Signs of Depletion: A noticeable decrease in water flow, a return of unpleasant tastes or odors, or a change in water clarity can indicate that the cartridge needs replacement.
- Prosedur ngagantian: Follow the "Setup and Installation" steps (1-7) for replacing the cartridge.
Gambar 3: Handapeun view of the BWT CR10 filter cartridge, showing the inlet/outlet structure.
Pamérésan masalah
This section addresses common issues you might encounter with your BWT CR10 cartridge.
- Ngurangan Aliran Cai:
- Cukang lantaranana: Cartridge filter mampet.
- Solusi: Replace the cartridge. Ensure proper installation and flushing.
- Unpleasant Taste or Odor Returns:
- Cukang lantaranana: Cartridge has reached its capacity.
- Solusi: Ganti cartridge.
- Leaks Around Filter Housing:
- Cukang lantaranana: Improperly seated O-ring, damaged O-ring, or housing not tightened correctly.
- Solusi: Shut off water, open housing, inspect and reseat/replace O-ring, then re-tighten housing.
- Cloudy Water After Cartridge Replacement:
- Cukang lantaranana: Air or fine carbon particles from the new cartridge.
- Solusi: Flush the system by running cold water for 5-10 minutes until clear. This is normal.
Gambar 4: Puncak view of the BWT CR10 filter cartridge, showing the internal structure and sealing surface.
Garansi sareng Rojongan
Specific warranty information for the BWT CR10 NA 10" Carbon & Resin Cartridge is not provided in this manual. For warranty details, technical support, or further assistance, please contact BWT customer service or refer to the official BWT websitus.
Pabrikan: BWT
Nomer Bagian: CR10
