Bubuka
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Brinks 2114-105 Tulip Style Door Knob. This passage knob is designed for use on hall and closet doors where no locking function is required. Please read all instructions carefully before beginning installation.
Émbaran Kasalametan
- Salawasna nganggo alat pelindung diri anu merenah, sapertos kacamata kaamanan, nalika pamasangan.
- Jauhkeun bagian leutik ti barudak pikeun nyegah bahaya choking.
- Use only the tools specified in this manual.
- Ensure the door is stable and properly supported during installation.
Eusi pakét
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- Exterior Knob Assembly
- Knob interior
- Mékanisme Latch
- Piring neunggeul
- Pamasangan screws
- Spindle
This image displays the disassembled components of the Brinks 2114-105 Tulip Style Door Knob. It includes the polished brass exterior knob, the interior knob, and the latch mechanism with its faceplate, ready for installation. The design is a classic tulip shape.
Parentah instalasi
Pakakas Diperlukeun
- Phillips Kepala Obeng
- Pita Ukur
- Pensil
Persiapan Panto
Pastikeun panto anjeun nyumponan spésifikasi ieu:
- Ketebalan Panto: 1-3/8 inci nepi ka 1-3/4 inci (35mm nepi ka 44mm)
- Backset: Adjustable 2-3/8 inches or 2-3/4 inches (60mm or 70mm)
Lengkah-demi-Lengkah Instalasi
- Pasang Latch: Insert the latch mechanism into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with the provided screws. Adjust the latch to the correct backset (2-3/8" or 2-3/4") if necessary, by rotating the latch housing.
- Pasang Kenop Luar: Insert the exterior knob assembly through the door, ensuring the spindle passes through the latch mechanism.
- Pasang kenop interior: Place the interior knob over the spindle, aligning the mounting posts with the holes on the exterior knob assembly.
- Amankeun Kenop-kenopna: Insert the long mounting screws through the interior knob's mounting posts and tighten them into the exterior knob assembly. Do not overtighten.
- Pasang Strike Plate: Align the strike plate with the latch bolt on the door frame. Mark and chisel out the area if needed, then secure the strike plate with the provided screws.
- Operasi tés: Close the door and test the knob's operation to ensure the latch retracts smoothly and the door closes properly.
Operasi
The Brinks 2114-105 Tulip Style Door Knob is a passage function knob. It does not include a locking mechanism. To open the door, simply turn either the interior or exterior knob to retract the latch bolt. The knob will return to its original position when released.
Pangropéa
- beberesih: Clean the knob's surface with a soft, damp lawon. Hindarkeun pembersih abrasive, pangleyur, atawa bahan kimia kasar, sabab ieu bisa ngaruksak finish.
- Lubrication: If the knob mechanism becomes stiff over time, a small amount of graphite lubricant can be applied to the latch bolt and spindle mechanism. Do not use oil-based lubricants, as they can attract dust and debris.
- tightening: Periodically check and tighten any loose mounting screws to ensure proper function and security.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kenopna leupas atanapi oyag. | Pamasangan screws leupas. | Tighten the mounting screws on the interior knob. |
| Baud kancing henteu mundur lancar. | Mechanism is dirty or dry. | Clean the mechanism and apply graphite lubricant. |
| Panto henteu nutup leres. | Strike plate misalignment or latch bolt not fully extending. | Adjust the strike plate position. Check for obstructions around the latch bolt. Ensure the latch is set to the correct backset. |
| Kenop hese dibalikkeun. | Internal components are binding. | Disassemble, clean, and reassemble the knob, ensuring all parts are correctly aligned. Lubricate if necessary. |
spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | 2114-105 |
| merek | BRINKS |
| Bahan | Metal (Brass, Bronze) |
| Bérés | Kuningan digosok |
| Ketebalan Panto | 1-3/8" nepi ka 1-3/4" (35mm nepi ka 44mm) |
| Balik deui | Adjustable 2-3 / 8 "atanapi 2-3 / 4" (60mm atanapi 70mm) |
| Fungsi | Passage (Hall/Closet) |
| Diménsi | 3.25 x 4.25 x 7.75 inci (Produk) |
| Item Beurat | 1.29 pon |
Émbaran jaminan
The Brinks 2114-105 Tulip Style Door Knob includes a Garansi saumur hirup. For specific details regarding warranty coverage and claims, please refer to the official Brinks websitus atanapi ngahubungan rojongan customer.
Rojongan Palanggan
If you encounter any issues not covered in this manual or require further assistance, please visit the official BRINKS websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Inpormasi kontak biasana tiasa dipendakan dina bungkusan produk atanapi produsén websitus.
