Buku Panduan Pangguna Motherboard ASUS H81M-K Micro ATX

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of the ASUS H81M-K Micro ATX motherboard. It is designed to assist users in setting up their system correctly and efficiently. Please read this manual thoroughly before beginning the installation process.

2. Produk Langkungview

The ASUS H81M-K is a Micro ATX motherboard designed for Intel LGA 1150 processors. It supports DDR3 memory and offers essential connectivity for a reliable computing experience.

Fitur konci:

• Intel H81 Express Chipset
• LGA1150 Socket for Intel Pentium, Celeron, Core i3, Core i5, Core i7 Processors
• 2x DDR3 DIMM Slots, supporting up to 16GB, Dual Channel, Non-ECC, Unbuffered memory (1600/1333/1066 MHz)
• 1x PCI-Express x16 Slot, 2x PCI-Express 2.0 x1 Slots
• 2x SATA 6Gb/s Ports, 2x SATA 3Gb/s Ports
• Rear I/O Ports: 2x USB 3.0, 2x USB 2.0, 1x PS/2 Keyboard, 1x PS/2 Mouse, 1x VGA, 1x DVI, 1x RJ45 LAN, Audio Jacks
• Onboard USB 2.0 headers for additional ports

Naon anu aya dina Kotak:

• ASUS H81M-K Motherboard
• Software CD (drivers and utilities)

Figure 1: ASUS H81M-K Motherboard Layout. This image displays the full layout of the ASUS H81M-K motherboard. Key components visible include the LGA 1150 CPU socket at the center, two yellow DDR3 DIMM slots on the right, and various expansion slots (PCIe x16, PCIe x1) below the CPU socket. Storage connectivity is provided by four SATA ports (two yellow, two black) on the lower right. The rear I/O panel on the left includes video outputs (VGA, DVI), USB ports, and audio jacks. Power connectors (24-pin EATXPWR and 8-pin ATX12V) are located on the right edge and top-left respectively. The chipset heatsink is visible in gold below the expansion slots, and the CMOS battery is near the center-left.

3. Parentah Setup

Follow these steps to properly install your ASUS H81M-K motherboard and its components.

3.1 Cék Pra-instalasi

• Pastikeun casing komputer anjeun cocog sareng motherboard Micro ATX.
• Gather all necessary components: CPU, CPU cooler, DDR3 RAM modules, power supply, storage devices, and any expansion cards.
• Ngaluarkeun listrik statik ku cara noel objék logam grounded saméméh nanganan komponén.

3.2 Pamasangan CPU (LGA 1150)

1. Tangtukeun lokasi stop kontak LGA 1150 CPU dina motherboard nu.
2. Gently nyorong ka handap uas beban teras tarik ka sisi pikeun muka panutup stop kontak CPU.
3. Align the triangular mark on your Intel LGA 1150 CPU with the corresponding mark on the socket. Carefully place the CPU into the socket without forcing it.
4. Close the socket cover and push the load lever back into its locked position. The cover will pop off automatically.
5. Pasang cooler CPU nurutkeun parentah produsén na.

3.3 Pamasangan RAM

1. Locate the two DDR3 DIMM slots (yellow) on the motherboard.
2. Buka klip dina kadua tungtung slot DIMM.
3. Align kiyeu dina modul memori DDR3 jeung konci dina slot DIMM.
4. Selapkeun modul memori pageuh kana slot nepi ka jepitan snap kana tempat. Pastikeun duanana klip ditutup pinuh.

3.4 Motherboard Mounting

1. Pasang tameng I/O kana bukaan pungkur wadah komputer anjeun.
2. Taliti nempatkeun motherboard kana kasus nu, aligning liang screw kalawan standoffs.
3. Ngamankeun motherboard kalawan screws, mastikeun eta pageuh seated tapi teu overtightened.

3.5 Nyambungkeun Daya

1. Connect the 24-pin ATX main power connector (EATXPWR) from your power supply to the corresponding slot on the motherboard.
2. Connect the 8-pin ATX 12V power connector (ATX12V) to its designated slot near the CPU socket.

3.6 Connecting Storage Devices

1. Connect your SATA storage devices (HDDs, SSDs) to the SATA 6Gb/s (yellow) or SATA 3Gb/s (black) ports on the motherboard using SATA data cables.
2. Ensure your storage devices are also connected to the power supply.

3.7 Nyambungkeun Header Panel Hareup

• Connect the front panel USB 3.0, USB 2.0, audio, power switch, reset switch, and LED cables from your case to the corresponding headers on the motherboard. Refer to the motherboard diagram for exact locations.

3.8 Installing Expansion Cards

• Insert your graphics card into the PCI-Express x16 slot.
• Install any other expansion cards (e.g., network cards, sound cards) into the PCI-Express x1 slots.
• Secure all expansion cards with screws to the case.

4. Parentah Operasi

After completing the hardware installation, proceed with the initial system setup.

4.1 Boot munggaran

1. Sambungkeun monitor, kibor, sareng beurit anjeun kana port anu saluyu dina panel I/O tukang.
2. Connect the power cable to your power supply and turn on the power supply switch.
3. Pencét tombol daya dina wadah komputer anjeun.
4. The system should power on and display the ASUS logo.

4.2 BIOS / Setup UEFI

• Salila ngamimitian, pencét tombol sababaraha kali DEL or F2 konci pikeun ngasupkeun BIOS / UEFI utilitas setelan.
• In the BIOS/UEFI, you can configure boot order, system time, and various hardware settings.
• Save changes and exit the BIOS/UEFI to continue booting.

4.3 Pamasangan Supir

• After installing your operating system, install the necessary drivers from the provided software CD or download the latest drivers from the ASUS official websitus.
• Key drivers include chipset, audio, LAN, and graphics drivers.

5. Pangropéa

Pangropéa anu leres mastikeun umur panjang sareng operasi stabil tina motherboard anjeun.

• Ngaleungitkeun lebu: Périodik ngabersihan lebu tina motherboard sareng komponenana nganggo hawa anu dikomprés. Pastikeun sistem dipareuman sareng dicabut colokan sateuacan beberesih.
• Pembaruan BIOS: Pariksa dukungan ASUS website for the latest BIOS updates. Updating the BIOS can improve system stability and compatibility. Follow ASUS's instructions carefully when performing a BIOS update.
• Cék komponén: Ensure all cables and components are securely connected. Loose connections can lead to system instability.

6. Cara ngungkulan

Bagian ieu ngabahas masalah umum anu anjeun tingali.

6.1 Taya Daya

• Verify that the power supply is connected to the motherboard (24-pin EATXPWR and 8-pin ATX12V) and plugged into a working power outlet.
• Pastikeun saklar catu daya aya dina posisi 'ON'.
• Pariksa sambungan switch kakuatan panel hareup kana motherboard nu.

6.2 Taya Pintonan

• Ensure the monitor is connected to the correct video output (VGA or DVI on the motherboard, or your discrete graphics card).
• Verify that the RAM modules are correctly seated in their slots. Try reseating them or testing with one module at a time.
• If using a discrete graphics card, ensure it is properly seated in the PCIe x16 slot and has adequate power connected.
• Clear the CMOS by removing the CMOS battery for a few seconds (with the system unplugged) or using the CLRTC jumper if available.

6.3 Instabilitas Sistim atawa kacilakaan

• Pariksa suhu CPU sareng GPU pikeun mastikeun aranjeunna dina wates operasi anu aman.
• Verify that all drivers are installed correctly and are up to date.
• Jalankeun alat diagnostik mémori pikeun pariksa modul RAM anu lepat.
• Ensure the power supply provides sufficient and stable power to all components.

7. Spésifikasi

8. Garansi jeung Rojongan

Kanggo inpormasi garansi sareng dukungan téknis, mangga tingal ka situs wéb resmi ASUS. website or contact your local ASUS representative. Keep your proof of purchase for warranty claims.

• Dukungan Online: Kunjungi dukungan ASUS websitus pikeun supir, FAQ, sareng pituduh ngungkulan masalah.
• Inpormasi kontak: Tingal kana ASUS website for regional contact details for technical assistance.