1. Bubuka
This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Clear-Com CC-400-X4 Double-Ear Headset. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Produk Langkungview
The Clear-Com CC-400 double-ear headset is engineered for high-quality audio communication. It features headphones designed for high ambient-noise attenuation and a hyper-cardioid dynamic microphone. The headset's flexible design and soft ear-pads contribute to user comfort. The microphone boom can rotate 300 degrees, which also functions as an On/Off switch for quick microphone muting.
Image 2.1: Clear-Com CC-400-X4 Double-Ear Headset. This image displays the Clear-Com CC-400-X4 double-ear headset. It features large, circumaural earcups designed for noise attenuation, an adjustable headband, and a flexible microphone boom arm extending from the left earcup. The microphone is a hyper-cardioid dynamic type. A 4-pin female XLR connector is visible at the end of the headset cable.
3. Setélan
3.1 Nyambungkeun Headsét
- Locate the 4-pin female XLR connector on the headset cable.
- Connect the 4-pin female XLR connector of the headset cable to the corresponding male XLR port on your intercom system or audio device. Ensure the connection is secure.
3.2 Nyaluyukeun pikeun Kanyamanan
- Adjust the headband for a secure yet comfortable fit on your head.
- Position the earcups over both ears, ensuring they fully enclose your ears for optimal sound isolation and comfort.
- Adjust the flexible microphone boom arm so the microphone is positioned approximately 1 to 2 inches from your mouth.
4. Parentah Operasi
4.1 Microphone Activation and Muting
- The microphone is activated or muted by rotating the boom arm.
- Pikeun Ngajempékeun: Rotate the microphone boom arm upwards, away from your mouth.
- Pikeun Aktipkeun: Rotate the microphone boom arm downwards, towards your mouth.
- The boom arm has a 300-degree rotation range for this function.
4.2 Pemantauan Audio
- Ensure your audio device or intercom system is properly configured for audio output to the headset.
- Adjust volume levels on your connected device as needed for comfortable listening.
5. Pangropéa
5.1 beberesih
- To clean the headset's exterior, use a soft, dry cloth.
- For the soft ear-pads, a slightly damp cloth with a mild soap solution can be used. Ensure no moisture enters the earcup components. Allow the ear-pads to air dry completely before using the headset.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the headset's finish and materials.
5.2 Panyimpenan
- Store the headset in a clean, dry environment away from direct sunlight and extreme temperatures.
- Avoid wrapping the cable tightly around the headset, as this can cause stress and damage to the cable over time.
6. Cara ngungkulan
6.1 Teu Aya Kaluaran Audio
- Pariksa sambungan: Ensure all cable connections, especially the 4-pin XLR connector, are fully and securely seated in their respective ports.
- Setélan polumeu: Verify that the volume levels on your connected intercom system or audio device are not muted and are set to an audible level.
- Kasaluyuan alat: Confirm that the headset is compatible with the audio device it is connected to.
6.2 Mikropon Teu Gawé
- Posisi Mikropon: Ensure the microphone boom arm is rotated downwards (towards your mouth) to the 'on' position.
- Integritas kabel: Pariksa kabel headset bisi aya karusakan atanapi bengkong anu katingali.
- Uji sareng Alat Lain: If possible, test the headset with another compatible audio device to determine if the issue lies with the headset or the connected equipment.
6.3 Kualitas Sora Miskin
- Kaayaan kabel: Check the headset cable for any signs of damage that might affect audio transmission.
- Earcup Seal: Ensure the earcups are properly seated around your ears to provide optimal noise isolation and sound delivery.
- gangguan: Move away from potential sources of electromagnetic interference that might affect audio quality.
7. Spésifikasi
| Fitur | Katerangan |
|---|---|
| Ngaran modél | CC-400 |
| Téhnologi konektipitas | Dikabel |
| Headphone Jack | 4-pin Female XLR |
| Tipe Mikropon | Hyper-cardioid Dynamic |
| Kontrol bising | Sound Isolation (High ambient-noise attenuation) |
| Wangun Earpiece | Cangkir anu nutupan ceuli |
| Item Beurat | 1.26 pon (0.57 Kilogram) |
| Fitur kabel | Retractable |
| Fitur husus | Double Enclosed Ear Headset, On/Off Mic Switch (via 300-degree boom rotation) |
| Bahan | Silicone (ear-pads), Nylon (carrying case, if included) |
8. Garansi jeung Rojongan
Clear-Com products typically come with a standard manufacturer's warranty. For specific warranty details, service, or technical support, please refer to the official Clear-Com website or contact their customer service directly. It is recommended to keep your purchase receipt for any warranty claims.
Pikeun pitulung salajengna, buka di Clear-Com official websitus.
