Buku Panduan Pangguna Cisco SG100-24-NA 24-Port Gigabit Switch

1. Bubuka

This manual provides instructions for the installation, operation, and maintenance of your Cisco SG100-24-NA 24-Port Gigabit Switch. This unmanaged switch is designed to provide high-performance network connectivity for small to medium-sized businesses, offering ease of use and simple setup without complex configuration.

Please read this manual thoroughly before using the device to ensure proper setup and to maximize its performance and longevity.

2. Produk Langkungview

2.1 Fitur konci

• 24 Pelabuhan Ethernet Gigabit: Provides high-speed wired connections for multiple devices.
• 2 Combo Mini-GBIC Ports: Offers flexible uplink options using fiber optic or copper connections.
• Saklar Teu Diurus: Plug-and-play operation requires no software configuration.
• Kinerja luhur: Supports a switching capacity of 48 Gbps and a forwarding capacity of 35.7 mpps for efficient data transfer.
• Énergi Éfisién: Designed for optimal power consumption.
• Desain kompak: Suitable for desktop or rack-mount installations.

2.2 Eusi pakét

The Cisco SG100-24-NA package typically includes:

• Cisco SG100-24-NA 24-Port Gigabit Switch
• Kabel listrik
• Mounting Kit (for rack-mount, if applicable)
• Gancang Mimitian Guide

Note: Contents may vary slightly depending on the region and specific product bundle.

2.3 Katerangan Fisik

Gambar 1: Hareupeun View of the Cisco SG100-24-NA Switch. This image shows the front panel of the switch, featuring 24 RJ-45 Gigabit Ethernet ports and status indicator LEDs for each port. The Cisco logo is visible on the left.

Gambar 2: Tukangeun View of the Cisco SG100-24-NA Switch. This image displays the rear panel, including the power input connector and product label with serial number and regulatory information.

Gambar 3: Sisi View of the Cisco SG100-24-NA Switch. This image illustrates the side panel, highlighting the ventilation grilles designed for heat dissipation to ensure optimal performance.

3. Parentah Setup

Follow these steps to set up your Cisco SG100-24-NA Gigabit Switch:

3.1 Persiapan Loka

• lokasi: Place the switch on a flat, stable surface or mount it in a standard 19-inch equipment rack. Ensure adequate ventilation around the device.
• kakuatan: Connect the switch to a grounded power outlet. Ensure the power source meets the switch's electrical requirements.
• Lingkungan: Avoid placing the switch near heat sources, in direct sunlight, or in areas with excessive dust or moisture.

3.2 Nyambungkeun Saklar

1. Sambungkeun Kakuatan: Plug the provided power cord into the power input on the rear panel of the switch and then into a suitable electrical outlet.
2. Sambungkeun Alat Jaringan: Use standard Ethernet cables (Cat5e or higher) to connect your network devices (computers, servers, access points, routers) to any of the 24 RJ-45 Gigabit Ethernet ports on the front panel.
3. Sambungkeun Uplink (Opsional): If using the Mini-GBIC ports for fiber or copper uplinks, insert the appropriate SFP module (not included) into one of the combo Mini-GBIC slots and connect the corresponding cable.
4. Pariksa sambungan: Once devices are connected, check the LED indicators on the front panel. A solid green LED typically indicates a valid link, and a blinking LED indicates network activity.

The Cisco SG100-24-NA is an unmanaged switch, meaning it operates automatically without requiring any software configuration. Once powered on and connected, it will begin forwarding network traffic.

4. Parentah Operasi

The Cisco SG100-24-NA is designed for simple, plug-and-play operation. No user configuration is required for basic functionality.

4.1 Daya Hurung/Pareuman

• Daya Hurung: Connect the power cord to the switch and a power outlet. The switch will power on automatically.
• Pareum listrik: Disconnect the power cord from the switch or the power outlet.

Note: There is no dedicated power button on this model.

4.2 Indikator LED

Each RJ-45 port has an associated LED indicator:

• Héjo padet: Indicates a valid network link at Gigabit (1000 Mbps) speed.
• Amber padet: Indicates a valid network link at 10/100 Mbps speed.
• Blinking Green/Amber: Indicates network activity (data transmission/reception) on that port.
• Pareum: No link detected or port is inactive.

A system LED (usually on the far left) indicates the overall status of the switch. Refer to the Quick Start Guide for specific system LED behavior.

5. Pangropéa

The Cisco SG100-24-NA switch requires minimal maintenance to ensure optimal performance and longevity.

5.1 beberesih

• Periodically clean the exterior of the switch with a soft, dry, lint-free cloth.
• Do not use liquid or aerosol cleaners, as they may damage the device.
• Pastikeun bukaan ventilasi bébas tina lebu sareng halangan.

5.2 Pertimbangan Lingkungan

• Operate the switch within its specified temperature and humidity ranges (refer to specifications).
• Mastikeun aliran hawa ditangtoskeun pikeun nyegah overheating.

6. Cara ngungkulan

If you encounter issues with your Cisco SG100-24-NA switch, refer to the following common troubleshooting steps:

6.1 Taya Daya

• Pastikeun kabel listrik disambungkeun sacara aman ka saklar sareng stop kontak listrik anu tiasa dianggo.
• Pariksa yen stop kontak listrik berpungsi ku cara nyolokkeun alat sejen.
• Check the system LED on the switch; if it's off, there might be a power issue.

6.2 No Link Light on Port

• Pastikeun kabel Ethernet disambungkeun pageuh kana port switch sareng alat anu disambungkeun.
• Coba kabel Ethernet béda pikeun ngaluarkeun kabel faulty.
• Sambungkeun alat ka port béda dina saklar.
• Pariksa yén alat anu nyambung parantos dihurungkeun sareng fungsina leres.

6.3 Slow Network Connection

• Pastikeun sadaya alat sareng kabel anu nyambung ngadukung Gigabit Ethernet pikeun kecepatan anu optimal.
• Pariksa keur lalulintas jaringan kaleuleuwihan atawa aplikasi rubakpita-intensif.
• Verify that the link light for the port is solid green (Gigabit speed) and not amber (10/100 Mbps).
• Pareuman terus hurungkeun deui saklar sareng alat anu nyambung.

7. Spésifikasi

Note: Specifications are subject to change without notice. For the most current information, please refer to the official Cisco product page or documentation.

8. Garansi jeung Rojongan

8.1 Garansi Produk

Cisco products typically come with a limited hardware warranty. The exact terms and duration of the warranty may vary by region and product. Please refer to the warranty information included with your product packaging or visit the official Cisco website for detailed warranty statements.

8.2 Rojongan Téknis

Pikeun bantuan teknis, dokuméntasi produk, undeuran software, sarta forum komunitas, mangga buka Rojongan Cisco resmi website. You may need your product's serial number for support inquiries.

Dukungan Cisco Websitus: https://www.cisco.com/c/en/us/support/index.html