1. Bubuka
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Metabo DKNG 40/50 Air Compressed Stapler/Nailer. Please read these instructions carefully before using the tool to ensure proper function and user safety. This tool is designed for driving staples and nails into various materials, suitable for both amateur and professional applications.
2. Parentah Kasalametan
Always observe basic safety precautions to reduce the risk of personal injury and damage to the tool.
- Nganggo panyalindungan panon: Always wear safety glasses or goggles that comply with applicable standards to protect against flying debris.
- Nganggo panyalindungan dédéngéan: Prolonged exposure to noise from pneumatic tools can cause hearing damage.
- Pegatkeun sambungan suplai hawa: Always disconnect the air supply before making adjustments, clearing jams, servicing, or when the tool is not in use.
- Never Point at Self or Others: The tool can discharge fasteners unexpectedly.
- Pariksa Tekanan Udara: Ensure the air compressor's pressure setting is within the recommended range for the tool.
- Workpiece Aman: Always ensure the material being worked on is stable and secure.
- Paké Fasteners Bener: Only use staples and nails of the specified type and length (Type 90 + ES, 15-50 mm).
- Tetep Leungeun Jelas: Do not place hands or fingers near the fastener discharge area.
- Ventilasi anu leres: Anggo di daérah anu berventilasi saé.
3. Produk Langkungview
The Metabo DKNG 40/50 is a robust air-powered tool designed for efficient fastening. Key components include:
- Majalah: Holds staples or nails.
- pemicu: Aktipkeun mékanisme tembakan.
- Inlet Udara: Titik sambungan pikeun selang hawa anu dikomprés.
- Irung Kasalametan: Prevents accidental firing by requiring contact with the workpiece.
- cecekelan: Dirancang sacara ergonomis pikeun cengkraman anu nyaman.
Gambar 1: Hareupeun view of the Metabo DKNG 40/50, showing the magazine and trigger.
4. Setélan
Before operating the tool, ensure proper setup.
4.1 Nyambungkeun ka Compressor hawa
- Pastikeun kompresor hawa anjeun dipareuman sareng tekananna dikirangan.
- Connect a suitable air hose to the air inlet of the stapler/nailer.
- Set the air compressor's output pressure to the recommended operating range (refer to specifications for details, typically around 6-8 bar or 90-120 PSI). The tool consumes approximately 0.66 liters of air per stroke.
- Turn on the air compressor and allow it to build pressure.
4.2 Ngamuat Fasteners
The Metabo DKNG 40/50 uses Type 90 + ES staples and nails with lengths ranging from 15 mm to 50 mm.
- Pegatkeun sambungan alat tina suplai hawa.
- Open the magazine according to the tool's design (usually by pressing a latch and sliding it open).
- Insert a strip of compatible staples or nails into the magazine, ensuring they are oriented correctly.
- Tutup majalahna pageuh nepi ka ngait.
Gambar 2: Angled view of the Metabo DKNG 40/50, highlighting the magazine and air inlet.
5. Parentah Operasi
Turutan léngkah ieu pikeun operasi anu aman sareng efektif.
- Nyambungkeun suplai hawa: Reconnect the air hose to the tool.
- Alat Posisi: Place the safety nose firmly against the workpiece where the fastener is to be driven.
- Fire Fastener: Squeeze the trigger to drive the staple or nail. The safety nose must be depressed for the tool to fire.
- Reposisi: Lift the tool from the workpiece and reposition for the next fastener.
5.1 Depth Adjustment (if applicable)
Some models feature a depth adjustment mechanism. If present, adjust the depth by rotating the depth adjustment knob or lever to achieve the desired fastener depth. Test on a scrap piece of material before final application.
Gambar 3: Top-handap view of the Metabo DKNG 40/50, showing the overall design.
6. Pangropéa
Pangropéa rutin ngajamin kinerja optimal sareng manjangkeun umur alat anjeun.
- Lubrication: Apply a few drops of pneumatic tool oil into the air inlet before each use or after every few hours of continuous operation. This lubricates internal components.
- beberesih: Keep the tool clean and free of dust and debris. Use compressed air to blow out the magazine and firing mechanism.
- Pariksa maké: Periodically inspect the safety nose, trigger, and air connections for signs of wear or damage. Replace worn parts immediately.
- Panyimpenan: Store the tool in a dry, clean environment when not in use. Disconnect from air supply.
7. Cara ngungkulan
Tingali kana bagian ieu pikeun masalah umum sareng solusina.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Tool not firing | No air supply; Low air pressure; Empty magazine; Safety nose not depressed; Jammed fastener | Check air connection and compressor; Increase air pressure; Reload fasteners; Ensure safety nose is fully depressed; Clear jam (disconnect air first) |
| Fasteners teu nyetir pinuh | Low air pressure; Incorrect fastener length; Hard material; Depth adjustment incorrect | Increase air pressure; Use appropriate fastener length; Adjust depth setting; Consider pre-drilling for very hard materials |
| Hawa bocor | Loose air fitting; Damaged O-rings or seals | Tighten air fittings; Replace damaged O-rings or seals (consult a qualified technician if unsure) |
| Fasteners jamming frequently | Incorrect fastener type/size; Damaged magazine; Worn driver blade | Use correct fasteners; Inspect and replace damaged magazine parts; Replace worn driver blade |
8. Spésifikasi
Detailed technical specifications for the Metabo DKNG 40/50.
- Jumlah modél: 601562500
- Pabrikan: METABO SAS
- Bahan: Baja
- Jenis Paku: 90 + ES
- Panjang kuku: 15 - 50 mm
- Air Consumption per Stroke: 0.66 l
- beurat: 1.1 kg
- Ukuran produk (L x W x H): 29.5 x 6 x 23.5 cm
- Dimaksudkeun pamakéan: Hobbyist, Professional
9. Garansi jeung Rojongan
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Metabo products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, spare parts, or service, please contact your authorized Metabo dealer or visit the official Metabo website for regional service centers. Information regarding spare parts availability may vary by region.
