Cen-Tech Digital Clamp- Dina Multimeter

Produk Leuwihview

The Cen-Tech Digital Clamp-On Multimeter is a versatile electrical testing instrument designed for measuring AC/DC voltage, AC current, and resistance. It also features an insulation test function. Its clamp-on design allows for non-contact measurement of AC current, enhancing safety and convenience.

Gambar 1: Hareupeun view of the Cen-Tech Digital Clamp-On Multimeter in its retail packaging. The packaging highlights key features such as clamp-style measurement, data hold, 500 volt resistance, and diode test capabilities.

Gambar 2: Tukangeun view of the Cen-Tech Digital Clamp-On Multimeter packaging. This view provides additional specifications and features, including low power indicator, included 9V battery, and dimensions.

Precautions Kasalametan

Always observe the following safety precautions when using the multimeter to prevent electric shock or personal injury, and to avoid damage to the meter or the equipment under test.

• Ulah nerapkeun leuwih ti dipeunteun voltage, sakumaha anu ditandaan dina méter, antara terminal atanapi antara terminal sareng taneuh.
• Paké caution ekstrim nalika gawé bareng voltages luhur 60V DC atanapi 30V AC RMS. Sapertos voltagÉta nyababkeun bahaya shock.
• Before making resistance measurements, disconnect power to the circuit and discharge all high-voltage kapasitor.
• Ulah dianggo méteran upami katingalina ruksak atanapi upami insulasi dina kabel tés rusak.
• Ensure the function switch is in the correct position for the measurement being taken.
• Keep fingers behind the finger guards on the test leads during use.
• Ganti batré geuwat nalika indikator batré lemah nembongan pikeun mastikeun bacaan akurat.

Disetél

Ngabongkar sareng Inspeksi

Carefully remove the multimeter and its accessories from the packaging. Inspect all components for any signs of damage. If any damage is found, contact customer support immediately.

Pamasangan batré

Multimeter ieu peryogi batré 9V (kalebet). Pikeun masang atanapi ngagentos batréna:

1. Pastikeun multimeter dipareuman.
2. Teangan tempat panutup kompartemen batré dina tonggong unit.
3. Anggo obeng pikeun nyabut sekrup anu ngamankeun panutupna.
4. Gently lift the cover and connect the 9V battery to the battery clip, observing correct polarity.
5. Teundeun batréna kana kompartemen jeung ngaganti panutup, securing eta kalawan screw nu.

Nyambungkeun Tes Ngarah

Insert the black test lead into the "COM" (common) jack and the red test lead into the "VΩmA" jack for voltage, resistance, and small current measurements. For AC current measurements using the clamp, test leads are not required unless simultaneous voltage readings are needed.

Parentah Operasi

This section details how to perform various measurements with your Cen-Tech Digital Clamp- Dina Multimeter.

Ukur AC/DC Voltage

1. Set the function switch to the desired ACV (Alternating Current Voltage) atanapi DCV (Vol Arus Searahtage) range. If the voltage is unknown, start with the highest range and decrease as necessary.
2. Connect the black test lead to the "COM" jack and the red test lead to the "VΩmA" jack.
3. Sambungkeun kabel tés sacara sajajar jeung sirkuit atawa komponén anu rék diukur.
4. Baca voltage nilai dina tampilan LCD.

Measuring AC Current (Clamp fungsi)

1. Set the function switch to the ACA (Alternating Current Amperes) rentang.
2. Buka clamp rahang ku mencét picuna.
3. Ngalampirkeun ngan hiji konduktor sirkuit dina cl nuamp rahang. Pastikeun rahang ditutupan pinuh.
4. Baca nilai ayeuna dina tampilan LCD.
5. Catetan: clamp measures current flowing through a single conductor. Do not clamp around multiple conductors (e.g., a power cord with both live and neutral wires) as the magnetic fields will cancel out, resulting in an inaccurate or zero reading.

Ngukur Résistansi

1. Ensure the circuit or component is de-energized before measuring resistance. Disconnect power and discharge any capacitors.
2. Set the function switch to the Ω (Ohms) range.
3. Connect the black test lead to the "COM" jack and the red test lead to the "VΩmA" jack.
4. Connect the test leads across the component whose resistance you want to measure.
5. Baca nilai lalawanan dina tampilan LCD.

Diode Tés

1. Set the function switch to the diode symbol (usually shared with continuity or resistance).
2. Connect the black test lead to the "COM" jack and the red test lead to the "VΩmA" jack.
3. Sambungkeun lead test beureum ka anoda jeung lead test hideung ka katoda dioda. A maju voltage drop (e.g., 0.5V to 0.8V for silicon diodes) should be displayed.
4. Reverse the test leads. The display should show "OL" (Open Loop) for a good diode.

Pangropéa

beberesih

Ngusap kasus kalayan iklanamp lawon sareng deterjen hampang. Entong nganggo bahan abrasif atanapi pangleyur. Pastikeun méterna garing pisan sateuacan dianggo.

Ngagantian batré

Refer to the "Battery Installation" section under Setup for instructions on replacing the 9V battery when the low battery indicator appears on the display.

Ngagantian sekering

This model typically does not have user-replaceable fuses for current ranges measured by the clamp. For internal fuse replacement (if applicable for other functions), it is recommended to contact qualified service personnel.

Panyimpenan

Upami teu dianggo salami lami, cabut batréna pikeun nyegah bocor sareng simpen multimeter di tempat anu tiis, garing, sareng jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.

Pamérésan masalah

spésifikasi

• model: 66897/95652
• AC / DC Voltage Rentang: As per product specifications (typically up to 600V)
• Kisaran arus AC: As per product specifications (typically up to 600A)
• Rentang lalawanan: As per product specifications (typically up to 20MΩ)
• Tés Diode: Sumuhun
• kakuatan: Batré 9V (kaasup)
• tampilan: LCD
• ukuran: 9" x 3-1/4" x 1-1/2"
• beurat: 454 g

Catetan: Specific ranges may vary slightly. Refer to the product packaging or official documentation for precise specifications.

Garansi sareng Rojongan

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your product packaging or visit the official Cen-Tech websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Pabrikan: Cen-Tech

ASIN: B00JKSOG8U

UPC: 792363668972