1. Bubuka
The NICE P1S Hand Transmitter is a compact and efficient remote control designed for various applications, primarily for door or gate systems. Operating at a frequency of 433.92 MHz, this transmitter features 5 distinct keys for versatile control. It is supplied with batteries and comprehensive instructions, ensuring a straightforward setup and programming process without the need for specialized equipment.
2. Setelan sareng Pamasangan Batré
The NICE P1S Hand Transmitter comes with batteries included, making it ready for use after initial setup. Follow these steps for battery installation or replacement:
- Panggihan kompartemen batréna di tukangeun pemancar.
- Buka panutup kompartemen.
- Insert two 1.5V AAA (LR03) alkaline batteries, ensuring correct polarity (+/-).
- Tutup panutup kompartemen batré aman.
Catetan: The transmitter requires 2 AA batteries, which are included. Ensure to use alkaline batteries for optimal performance.
3. Parentah Operasi
The NICE P1S Hand Transmitter is designed for simple operation with its 5-button interface. Its radio frequency connectivity allows for a maximum range of 10 meters under optimal conditions.
3.1 Programming the Transmitter
The programming type for this device is a one-time registration with the receiver. Refer to your receiver's manual for specific instructions on how to put it into programming mode and register the new transmitter.
3.2 Fungsi Tombol
The transmitter features 5 buttons. The specific function of each button (e.g., open, close, stop) will depend on how it is programmed with your door or gate system. Typically, the larger buttons control primary functions, while smaller buttons may control auxiliary features or specific modes.

Image of the NICE P1S Hand Transmitter, a white rectangular remote control with five grey buttons. The top button has an upward arrow, the middle button has a square, and the third button has a downward arrow. Below these are two smaller rows of circular buttons. The 'Nice' logo is visible at the bottom right.
4. Pangropéa
The NICE P1S Hand Transmitter requires minimal maintenance. The primary maintenance task is battery replacement when the transmitter's performance diminishes or it stops responding.
- Ngagantian batré: Replace batteries as described in Section 2 when the indicator light (if present) signals low battery, or the range decreases significantly.
- beberesih: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using abrasive cleaners or solvents.
- Panyimpenan: Store the transmitter in a dry place, away from extreme temperatures and direct sunlight.
5. Cara ngungkulan
If you experience issues with your NICE P1S Hand Transmitter, consider the following common solutions:
- Transmitter not responding:
- Pariksa naha batréna leres diselapkeun sareng henteu béak. Ganti lamun perlu.
- Ensure you are within the maximum operating range (10 meters) of the receiver.
- Verify that the transmitter is properly programmed with the receiver. Re-program if needed.
- Rentang operasi anu dikirangan:
- Ganti batréna.
- Check for obstructions between the transmitter and the receiver (e.g., thick walls, metal objects).
- Pastikeun teu aya gangguan radio anu kuat di daérah éta.
If problems persist, consult a qualified technician or contact NICE customer support.
6. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | NICE |
| Modél | P1S |
| Frékuénsi | 433.92 MHz |
| Jumlah Kancing | 5 |
| Jenis Batré | 2 x 1.5V AAA (LR03) Alkaline |
| Ukuran (L x W x H) | 1.7 x 0.6 x 0.2 cm |
| Item Beurat | 140 gram |
| Téhnologi konektipitas | Frékuénsi Radio |
| Rentang maksimum | 10 Méter |
| Tipe Controller | Tombol Control |
7. Garansi jeung Rojongan
The NICE P1S Hand Transmitter comes with a 1-year warranty, which includes the battery and instructions. For technical support, warranty claims, or further assistance, please refer to the contact information provided with your product packaging or visit the official NICE websitus.
For more information, you may visit the product page: NICE P1S on Amazon.se





