Electro-Voice RE320

Electro-Voice RE320 Large Diaphragm Dynamic Vocal Microphone User Manual

Modél: RE320

1. Bubuka

The Electro-Voice RE320 is a professional-grade large diaphragm dynamic microphone engineered for recording and sound reinforcement applications. It is designed to deliver exceptional detail, dynamic content, and natural tonal performance with extremely low noise. The RE320 is suitable for capturing vocals and a wide array of electric and acoustic instrument sources.

This manual provides essential information for the proper setup, operation, and maintenance of your RE320 microphone to ensure optimal performance and longevity.

Electro-Voice RE320 microphone, front view

Gambar 1: Hareupeun view of the Electro-Voice RE320 Large Diaphragm Dynamic Vocal Microphone. This image shows the microphone's robust black casing and grille design.

2. Setélan

Proper setup is crucial for achieving the best audio quality from your RE320 microphone.

2.1 Ngabongkar sareng Inspeksi

Carefully remove the microphone from its packaging. Inspect the microphone for any signs of damage. Retain all packaging materials for future storage or transport.

2.2 Masang Mikropon

The RE320 requires a microphone stand and a compatible microphone clip or shock mount (not included with all packages). Attach the microphone clip or shock mount securely to a microphone stand. Insert the RE320 into the clip or shock mount, ensuring it is firmly held.

Electro-Voice RE320 microphone mounted on a stand with an XLR cable connected

Figure 2: The RE320 microphone attached to a stand with an XLR cable connected. This illustrates the typical setup for use.

2.3 Nyambungkeun ka Parabot Audio

The RE320 features an XLR connector for balanced audio output. Connect one end of a standard XLR cable to the microphone's output and the other end to a microphone preamplifier, audio interface, or mixer.

  • Konektipitas XLR: Use a high-quality XLR (3-pin) cable for optimal signal integrity.
  • PraampPersyaratan Lifier: Dynamic microphones like the RE320 typically require a significant amount of gain from a preamplifier. Ensure your audio interface or mixer has sufficient clean gain. In some cases, an inline preamplifier (e.g., a Cloudlifter or Fethead) may be beneficial to boost the signal before it reaches your main preamp, especially if you experience low signal levels or noise at high gain settings.

3. Operating the RE320

The RE320 is equipped with a unique Dual Personality switch, allowing it to adapt to different sound sources.

3.1 Dual Personality Switch

Located on the microphone body, this switch provides two distinct frequency response curves:

  • Position 1 (Default/Voice/Instrument): This setting delivers a lively, natural tonal response suitable for vocals, electric guitars, acoustic instruments, and general sound reinforcement. It provides the RE320's characteristic clear and balanced sound.
  • Person speaking into the Electro-Voice RE320 microphone

    Figure 3: A person speaking into the RE320 microphone, demonstrating its use for vocal applications.

  • Position 2 (Kick Drum): This setting activates an "insta-kick" curve, specifically designed to enhance the low-frequency response and transient attack for kick drums. It provides a pre-equalized sound optimized for percussive bass instruments.
  • Electro-Voice RE320 microphone positioned inside a kick drum

    Figure 4: The RE320 microphone positioned inside a kick drum, illustrating its specialized application for bass percussion.

3.2 Nempatkeun Mikropon

Experiment with microphone placement relative to the sound source to achieve the desired tone and minimize unwanted room reflections. The RE320's Variable-D pattern control helps minimize positional and off-axis tonal shifts, offering consistent sound even with slight movements.

Electro-Voice RE320 microphone on a stand in front of a guitar amppangagung

Figure 5: The RE320 microphone positioned in front of a guitar amplifier, demonstrating its versatility for instrument recording.

4. Pangropéa

To maintain the performance and appearance of your RE320 microphone, follow these guidelines:

  • beberesih: Use a soft, dry cloth to wipe the microphone body. Avoid using liquid cleaners or solvents, as they may damage the finish or internal components.
  • Panyimpenan: When not in use, store the microphone in its original packaging or a protective case to prevent dust accumulation and physical damage.
  • Kaayaan Lingkungan: Avoid exposing the microphone to extreme temperatures, high humidity, or direct sunlight for extended periods.
  • Filter Pop: The integrated pop filter helps reduce plosive sounds. If external pop filters are used, ensure they do not obstruct the microphone's acoustic properties.

5. Cara ngungkulan

If you encounter issues with your RE320 microphone, refer to the following common troubleshooting steps:

  • Low Signal Output:
    • Ensure your preamplifier gain is set appropriately. Dynamic microphones require more gain than condenser microphones.
    • Consider using an inline preamplifier (e.g., Cloudlifter, Fethead) if your existing preamp cannot provide sufficient clean gain.
    • Verify all XLR cable connections are secure and the cable is not faulty.
  • Sora ngahiung atawa ngagaur:
    • Pariksa sadaya sambungan kabel pikeun seating ditangtoskeun.
    • Ensure the XLR cable is balanced and in good condition.
    • Move the microphone and cables away from power sources, fluorescent lights, or other electronic devices that may cause electromagnetic interference. The RE320 features an integrated humbucking coil to minimize such interference.
  • Henteu aya sora:
    • Confirm the microphone is correctly connected to an active input on your audio interface or mixer.
    • Check the input gain and master volume levels on your audio equipment.
    • Tés nganggo kabel XLR anu béda pikeun nyingkirkeun kamungkinan kabelna ruksak.
  • Sora distort:
    • Ngurangan gain input dina pre anjeunamplifier or mixer to prevent clipping.
    • Pastikeun mikropon henteu kaleuleuwihi beban ku sumber sora anu tarik teuing.

If problems persist after attempting these steps, contact Electro-Voice customer support for further assistance.

6. Spésifikasi

Detailed technical specifications for the Electro-Voice RE320 microphone:

FiturSpésifikasi
merekÉléktro-Sora
Ngaran modélRE320
Nomer Modél ItemRE320
Faktor Bentuk MikroponMikropon Ngan
Téhnologi konektipitasXLR
Tipe PanyambungXLR
Pola PolarSaarah
Réspon Frékuénsi18000 Hz (Upper limit, typical dynamic mic range is broader)
Impedansi150 ohm
Rasio Signal-to-Noise70 dB
Item Beurat1 pon
Ukuran produk (L x W x H)1 x 1 x 9 inci
Bahanlogam
WarnaHideung
Fitur hususVariable-D, humbucking coil, integrated pop filter
Dianjurkeun Mangpaat Pikeun ProdukSinging, Vocal, Instrument Recording
ProdusénÉléktro-Sora

7. Garansi jeung Rojongan

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Electro-Voice website. For technical support, service, or additional inquiries, please contact Electro-Voice customer service through their official channels.

Resmi Websitus: www.electrovoice.com

Dokumén Patali - RE320

Praview Electro-Voice Model D054 Omnidirectional Dynamic Microphone Specifications and Applications
Comprehensive technical specifications, features, description, and applications for the Electro-Voice Model D054 omnidirectional dynamic microphone, a professional audio tool.
Praview Electro-Voice N/D267a & N/D267as Wired Microphone User Manual
Comprehensive user manual for the Electro-Voice N/D267a and N/D267as wired microphones, detailing features, operation, placement, specifications, and warranty information.
Praview Electro-Voice R300 UHF Wireless Microphone System User Guide
Comprehensive user guide for the Electro-Voice R300 UHF Wireless Microphone System, covering quick setup, detailed component descriptions, operational guidelines, troubleshooting, FAQs, specifications, and service information for optimal performance.
Praview Electro-Voice R300 UHF Wireless Microphone System Quick Start Guide
A concise guide to setting up and using the Electro-Voice R300 UHF Wireless Microphone system, covering both handheld and bodypack transmitter configurations with step-by-step instructions.
Praview Électro-Sora TL770D: Spésifikasi Sistem Subwoofer Bioskop Frekuensi Pisan-Rendah
spésifikasi teknis lengkep jeung leuwihview tina Electro-Voice TL770D, sistem spiker frékuénsi pisan-rendah dirancang pikeun aplikasi subwoofer bioskop-output tinggi kalawan woofers dual DL18MT.
Praview Electro-Sora Powered Loudspeakers: Kasalametan jeung Inpormasi Kaamanan
Parentah kaamanan jeung kaamanan komprehensif pikeun spiker Electro-Voice Powered, ngawengku warnings penting, precautions, jeung tungtunan instalasi sakuliah sababaraha basa.