Buku Panduan Gergaji Jigsaw Einhell TC-JS 80 600W

1. Bubuka

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TC-JS 80 600W Jigsaw. Please read this manual thoroughly before using the tool and keep it for future reference.

The Einhell TC-JS 80 is a powerful jigsaw designed for various cutting tasks. It features an adjustable 4-position pendulum function and electronic speed control for adapting to different materials. Its design includes dust extraction capability and a rotating saw shoe for miter cuts up to 45°.

2. Parentah Kasalametan

Peringatan Kasalametan Alat Daya Umum:

• Always wear eye protection and hearing protection when operating the jigsaw.
• Tetep wewengkon gawé beresih jeung well-cahayana. Wewengkon nu pabalatak atawa poek ngondang kacilakaan.
• Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
• Jauhkeun murangkalih sareng jalma-jalma nalika ngajalankeun alat listrik. Distractions bisa ngabalukarkeun anjeun leungit kontrol.
• Ensure the power cord is not damaged and is kept away from heat, oil, sharp edges, or moving parts.
• Salawasna cabut colokan alat tina sumber daya sateuacan ngalakukeun pangaluyuan, ngaganti asesoris, atanapi nyimpen alat.
• Ngamankeun workpiece nu. Paké clamps atawa vise pikeun nahan workpiece pageuh.
• Ulah overreach. Tetep footing ditangtoskeun jeung kasaimbangan sepanjang waktos.
• Anggo alat anu leres pikeun aplikasi anjeun. Ulah maksakeun alat.
• Jaga alat-alat kalayan ati-ati. Tetep motong alat anu seukeut sareng bersih.
• Pariksa keur misalignment atawa beungkeutan bagian pindah, megatkeun bagian, sarta sagala kaayaan sejenna nu bisa mangaruhan operasi alat urang.

Specific Jigsaw Safety Warnings:

• Hold the tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
• Paké clamps atawa cara praktis séjén pikeun ngamankeun sarta ngarojong workpiece ka platform stabil.
• Pastikeun sabeulahna seukeut sareng cocog pikeun bahan anu dipotong.
• Do not touch the blade immediately after use, as it may be hot.

3. Produk Langkungview jeung Komponén

Familiarize yourself with the various parts of your Einhell TC-JS 80 Jigsaw.

Gambar 3.1: Gemblengna view of the Einhell TC-JS 80 Jigsaw.

This image shows the complete jigsaw unit, highlighting its compact design and the attached saw blade with a parallel guide for precise cuts.

• cecekelan: Dirancang sacara ergonomis pikeun cengkraman anu nyaman.
• Saklar on/off: Located on the handle for easy access.
• Pencét Kontrol Kecepatan: Allows adjustment of cutting speed.
• Pendulum Function Selector: Adjusts the blade's orbital action for faster or finer cuts.
• Saw Blade Clamp: Secures the saw blade in place.
• Base Plate (Saw Shoe): Supports the tool on the workpiece and can be angled for miter cuts.
• Port ékstraksi lebu: For connecting a dust extraction system.
• Pituduh paralel: Assists in making straight cuts parallel to an edge.

Figure 3.2: Detail of the blade clampmékanisme na.

This image provides a closer look at the area where the saw blade is inserted and secured, including the blade guide roller.

Figure 3.3: Ergonomic handle design.

This image highlights the comfortable, non-slip grip of the jigsaw's handle, designed for user comfort during operation.

Figure 3.4: Speed control dial.

This image shows the dial used to adjust the electronic speed control, allowing the user to select the appropriate cutting speed for different materials.

4. Setélan

4.1. Masang Mata Gergaji

1. Pastikeun jigsaw dicabut tina sumber listrik.
2. Locate the hex lock/Allen key for the blade clamp.
3. Loosen the screw on the blade clamp ngagunakeun kenop Allen.
4. Selapkeun sabeulah ragaji kana cl sabeulahamp kalawan huntu nyanghareup ka hareup.
5. Ensure the back of the blade fits into the guide roller.
6. Tighten the screw firmly to secure the blade. Do not overtighten.

4.2. Adjusting the Base Plate for Miter Cuts

The base plate can be angled up to 45° for miter cuts.

1. Unplug the jigsaw.
2. Loosen the screws that secure the base plate to the main body of the jigsaw.
3. Tilt the base plate to the desired angle (up to 45° left or right). Use a protractor for accuracy if needed.
4. Tighten the base plate screws securely.

Figure 4.1: Flexible cuts up to 45 degrees.

This graphic demonstrates the capability of the jigsaw to perform angled cuts by tilting its base plate up to 45 degrees in either direction.

5. Parentah Operasi

5.1. Powering on / Pareum

• To turn on the jigsaw, press the On/Off switch.
• To turn off, release the On/Off switch.

5.2. Nyaluyukeun Speed

The electronic speed controller allows you to adjust the cutting speed based on the material and desired finish.

• Rotate the speed control dial (Figure 3.4) to increase or decrease the blade strokes per minute.
• Lower speeds are generally used for harder materials or for more precise cuts.
• Higher speeds are suitable for softer materials and faster cutting.

Figure 5.1: Speed vs. Exact cutting.

This graphic illustrates the difference between high-speed cutting (for quick material removal) and exact cutting (for precision), which can be controlled by the electronic speed setting.

5.3. Using the Pendulum Function

The 4-position pendulum function controls the orbital action of the blade, affecting cutting speed and finish.

• Posisi 0 (Teu Aya Pendulum): For fine cuts, cutting thin materials, or cutting metal. The blade moves straight up and down.
• Positions I, II, III (Increasing Pendulum): For faster cutting in wood and other soft materials. The blade moves in an elliptical motion, clearing chips more aggressively.
• Adjust the pendulum selector lever to the desired position.

Figure 5.2: Pendulum function settings.

This graphic visually explains how the pendulum function alters the blade's movement, from a straight up-and-down motion to an orbital motion, for varying cutting speeds and finishes.

5.4. Pangeluaran Lebu

For a cleaner work environment, connect a dust extraction system to the dust extraction port.

• Attach a suitable vacuum cleaner hose to the dust extraction port at the rear of the jigsaw.
• Ensure the connection is secure before operating the tool.

6. Pangropéa

Pangropéa rutin ngajamin umur panjang sareng kinerja optimal tina jigsaw anjeun.

6.1. beberesih

• Salawasna cabut alat sateuacan beberesih.
• Ngabersihan liang ventilasi rutin pikeun nyegah overheating.
• Remove dust and debris from the blade area and base plate after each use.
• Anggo sikat lemes atanapi hawa anu dikomprés pikeun beberesih. Entong nganggo pelarut atanapi pembersih anu abrasif.

6.2. Gantian sabeulah

Replace dull or damaged saw blades promptly to ensure efficient and safe cutting. Refer to Section 4.1 for blade installation steps.

6.3. Panyimpenan

• Simpen gergaji ukir di tempat anu garing, aman, sareng teu kahontal ku barudak.
• Ensure the power cord is neatly coiled and not kinked.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Einhell customer service directly. Keep your proof of purchase for warranty claims.

Durasi Kasadiaan Suku Cadang EU: 1 Taun