1. Bubuka
This manual provides essential information for the safe and effective use of TIMCO Timber Screws, Hex Head, Exterior Green, 6.7 x 60 (Model: 60IN). These screws are designed for timber-to-timber applications, featuring a hex head and a specialized coating for enhanced corrosion resistance in exterior environments. Please read this manual thoroughly before use to ensure proper installation and longevity of the product.
Figure 1: Packaging for TIMCO In-Dex Timber Screws, showing product details and branding.
2. Émbaran Kasalametan
Always prioritize safety when working with fasteners and power tools. Failure to follow safety instructions may result in injury or damage.
- Anggo alat pelindung pribadi (PPE) anu cocog, kalebet kacamata kaamanan, sarung tangan, sareng panyalindungan dédéngéan.
- Pastikeun wewengkon gawé téh well-cahayana sarta jelas tina halangan.
- Use the correct size and type of driver bit for the hex head to prevent stripping.
- Do not over-tighten screws, as this can damage the timber or the screw itself.
- Keep screws out of reach of children.
- Inspect screws for any damage before use. Do not use damaged screws.
3. Fitur Produk
The TIMCO Timber Screws are engineered with several features for optimal performance:
- 8mm Hex Head: Countersunk with a fixed washer for secure fastening and a flush finish.
- Résistansi korosi: Patented multi-layer plating withstands up to 1,000 hours salt spray resistance (BS EN 9227:2014), suitable for exterior applications.
- Patented Lubrication: Enhances screw insertion time and further improves corrosion resistance.
- Helix Shank: Designed to remove debris during driving, improving clampkakuatan.
- 50° Deep Single Thread: Provides a secure fixing with high pull-out resistance.
- Bahan: Constructed from durable carbon steel.
4. Setup jeung Persiapan
Before installing the TIMCO Timber Screws, ensure proper preparation:
- Select Appropriate Timber: Ensure the timber is suitable for the intended application and free from significant defects.
- Choose Correct Length: Select a screw length appropriate for the thickness of the timber being joined, ensuring adequate penetration into the base material without protruding.
- Pre-drilling (Optional but Recommended): For hardwoods or to prevent splitting, pre-drilling a pilot hole slightly smaller than the screw's core diameter may be beneficial.
- Bit Panggerak: Use an 8mm hex driver bit that is in good condition to prevent cam-out and damage to the screw head.
5. Parentah Operasi
Follow these steps for effective installation of TIMCO Timber Screws:
- Posisikeun Sekrup: Place the screw tip at the desired fastening point on the timber.
- Engage Driver: Insert the 8mm hex driver bit firmly into the screw head.
- Ngajalankeun Screw: Using a suitable power drill or impact driver, apply steady, even pressure while driving the screw into the timber. Maintain a straight angle to ensure proper engagement and prevent bending.
- Pangikat Aman: Continue driving until the hex head with its fixed washer is flush with the timber surface. Avoid over-tightening, which can strip the timber or shear the screw.
Gambar 2: Hiji example of a TIMCO Timber Screw being installed into a timber structure using an impact driver.
6. Pangropéa sareng Panyimpenan
Proper care and storage will ensure the longevity and performance of your TIMCO Timber Screws:
- Panyimpenan: Store screws in their original packaging or a dry, cool environment to protect the corrosion-resistant coating. Avoid exposure to excessive moisture or corrosive chemicals.
- Penanganan: Handle screws carefully to avoid damaging the threads or coating.
- pembuangan: Dispose of any damaged or unusable screws responsibly according to local regulations.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Screw head strips (cam-out) | Incorrect driver bit size; worn driver bit; insufficient pressure; excessive torque. | Use the correct 8mm hex driver bit; replace worn bits; apply firm, consistent pressure; reduce drill torque setting. |
| Screw not driving fully | Insufficient power from drill; dense timber; pilot hole too small or absent. | Use a more powerful drill/impact driver; consider pre-drilling a larger pilot hole for dense timber. |
| Timber splitting | No pilot hole; screw too close to timber edge; timber type prone to splitting. | Pre-drill a pilot hole; ensure adequate distance from timber edges; use appropriate timber for the application. |
8. Spésifikasi
| Atribut | Rincian |
|---|---|
| Nomer modél | 60IN |
| Ukuran | 6.7 x 60 mm |
| Tipe Sirah | Hex Head with Fixed Washer |
| Bahan | Baja Karbon |
| Exterior Finish | Exterior (Green Organic) |
| Résistansi korosi | 1,000 hours salt spray (BS EN 9227:2014) |
| Tipe Thread | 50° Deep Single Thread |
| Panutup Thread | Sawaréh Utas |
| Jumlah Potongan | 50 per kotak |
| Item Weight (Box of 50) | 0.5 Kilogram (kira-kira 1.1 pon) |
9. Garansi jeung Rojongan
For specific warranty information regarding TIMCO Timber Screws, please refer to the official TIMCO websitus atanapi ngahubungi dukungan palangganna sacara langsung. Sarat sareng katangtuan garansi tiasa bénten-bénten.
For technical assistance or further inquiries, please visit the TIMCO official websitus or consult your retailer.
