Leviton 003-84026-0 Stainless Steel 2-Gang Power Outlet Receptacle Wallplate Instruction Manual

Bubuka

This manual provides instructions for the proper installation and maintenance of the Leviton 003-84026-0 Stainless Steel 2-Gang Power Outlet Receptacle Wallplate. Please read these instructions carefully before beginning installation.

Émbaran Kasalametan

• Always turn off power at the circuit breaker or fuse box before installation or maintenance.
• Ensure all wiring connections comply with local electrical codes.
• Upami anjeun henteu yakin kana bagian mana waé tina pitunjuk ieu, konsultasi ka tukang listrik anu mumpuni.
• Produk ieu dirancang pikeun pamakéan jero rohangan wungkul.

Eusi pakét

• Leviton 003-84026-0 Stainless Steel 2-Gang Wallplate
• Mounting Screws (typically included with wallplate)

Setup sareng Instalasi

1. Pareuman Daya: Locate the circuit breaker or fuse that controls the power to the outlet where the wallplate will be installed. Turn off the power completely. Verify power is off using a voltage panguji.
2. Cabut Tembok Lawas: Carefully unscrew and remove the existing wallplate, if any.
3. Posisi Wallplate Anyar: Align the Leviton 003-84026-0 wallplate over the electrical box, ensuring the openings match the receptacles.
4. Pelat Dinding anu Aman: Insert the provided mounting screws into the designated holes on the wallplate and tighten them gently until the wallplate is flush with the wall. Do not overtighten, as this can damage the wallplate or the electrical box.
5. Mulangkeun Daya: Once the wallplate is securely installed, restore power at the circuit breaker or fuse box.

Parentah Operasi

The Leviton 003-84026-0 wallplate is a passive component designed to cover and protect electrical outlets. No specific operational steps are required beyond its proper installation. Ensure that the receptacles are fully accessible and that the wallplate does not obstruct their use.

Pangropéa

• beberesih: To clean the stainless steel wallplate, use a soft, damp cloth. For stubborn marks, a mild, non-abrasive cleaner suitable for stainless steel can be used. Avoid harsh chemicals or abrasive scrubbers, which can scratch the finish.
• Pamariksaan: Periodically inspect the wallplate for any signs of damage, such as cracks, discoloration, or loose screws. If damage is observed, turn off power and replace the wallplate.

Pamérésan masalah

• Wallplate is Loose: Ensure mounting screws are tightened appropriately. Do not overtighten.
• Pelat Dinding Henteu Dipasang Rata: Check for obstructions behind the wallplate or ensure the electrical box is properly recessed.
• Goresan atanapi Perubahan Warna: Refer to the Maintenance section for cleaning instructions. Deep scratches may require replacement.

spésifikasi

This diagram illustrates the precise dimensions of the 2-gang wallplate. It shows a width of 2.750 inches (69.85 mm) for each opening, a total width of 4.56 inches (115.9 mm) for the 2-gang configuration, and a height of 4.500 inches (114.30 mm). The thickness is 0.220 inches (5.59 mm). Screw hole spacing and opening dimensions are also detailed.

Émbaran jaminan

Leviton products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official Leviton websitus atanapi ngahubungan rojongan customer. Simpen bukti pameseran anjeun pikeun klaim garansi.

Rojongan jeung Kontak

For technical assistance, product inquiries, or support, please visit the official Leviton websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Inpormasi kontak biasana tiasa dipendakan dina produsén websitus atanapi bungkusan produk.

• Pabrikan: Leviton
• Websitus: www.leviton.com