Bubuka
About Your WINBOT W930
The ECOVACS WINBOT W930 is an advanced window cleaning robot designed to efficiently clean framed and frameless windows of various thicknesses, as well as mirrors and other smooth glass surfaces. Featuring a Smart Drive system and a 4-stage cleaning process, it ensures thorough cleaning, even in corners.
Fitur konci
- Smart Drive System for comprehensive cleaning.
- 4-stage cleaning process.
- Suitable for framed and frameless vertical windows, mirrors, and shower cabins.
- Enhanced safety features: continuous vacuum monitoring, backup battery, and safety tether.
- Ergonomically designed for easy handling.
- Equipped with fall sensors for frameless glass and obstacle sensors for window handles.
- Operasi kadali jauh.
- Effective on both small and large glass surfaces.
Émbaran Kasalametan penting
Triple Safety System
The WINBOT W930 incorporates a triple safety system to prevent falls:
- Vacuum Monitoring: A sensor continuously monitors the vacuum pressure. A secondary suction ring provides backup if the primary system fails.
- Batré Cadangan: An internal battery secures the WINBOT W930 in case of a power outage.
- Safety Tether: A suction cup and safety rope are provided to secure the WINBOT W930, preventing it from falling if it detaches from the glass. Always attach the safety tether before operation.
Precautions Kasalametan Umum
- Ensure the safety tether is always attached to a secure anchor point before operating the robot.
- Ulah dianggo robot dina permukaan kaca anu retak atanapi ruksak.
- Jauhkeun leungeun jeung pakean leupas tina bagian pindah salila operasi.
- Ulah ngalelepkeun robot kana cai atanapi cairan anu sanés.
- Use only the recommended cleaning solution and accessories.
- Supervise the robot during its first few uses to ensure proper operation.
Eusi pakét
Pastikeun yén sadaya item aya dina pakét anjeun:
- ECOVACS WINBOT W930 Jandéla beberesih Robot
- Kadali jauh
- Adaptor kakuatan
- Kasalametan Tether
- Cleaning Pads (multiple)
- Solusi beberesih
- Manual pangguna (dokumén ieu)
Guide Setup
1. Ngecas Batré Internal
Before first use, ensure the internal battery is fully charged. Connect the power adapter to the robot and a power outlet. A green flashing light indicates the battery is charging. Allow several hours for a full charge.
2. Ngapasangkeun Bantalan Pembersih
Attach clean microfiber cleaning pads to the underside of the WINBOT W930. Ensure they are securely fastened.
Gambar: Underside view of the WINBOT W930, illustrating the attachment points for the cleaning pads.
3. Applying Cleaning Solution
Enteng dampen the cleaning pads with the provided cleaning solution. Avoid over-saturating the pads, as this can affect the robot's movement and cleaning performance.
4. Attaching the Safety Tether
Securely attach the safety tether's suction cup to the window surface, away from the robot's cleaning path. Connect the other end of the tether to the designated attachment point on the WINBOT W930.
Parentah Operasi
1. Ngahurungkeun
Switch the power button located on the back of the WINBOT W930 to the 'ON' position.
Gambar: Top view of the WINBOT W930, highlighting the power button and handle.
2. Placing the Robot on the Window
Place the WINBOT W930 firmly onto the glass surface. The robot will create a vacuum seal, indicated by a solid light. Ensure the robot is securely attached before releasing éta.
Image: The WINBOT W930 actively cleaning a large exterior window.
Image: The WINBOT W930 cleaning an interior glass partition in an office setting.
3. Mimitian Daur beberesih
Press the 'Start' button on the robot or the remote control to begin the cleaning cycle. The WINBOT W930 will automatically calculate the optimal cleaning path.
4. Ngagunakeun Remote Control
The remote control allows you to manually steer the robot if needed, especially for reaching specific spots or guiding it on tall windows. Refer to the remote control diagram in the separate remote control guide for button functions.
5. Completing the Cleaning Cycle
Once the cleaning cycle is complete, the WINBOT W930 will return to its starting point and emit an audible alert. Carefully remove the robot from the glass surface.
Pangropéa
1. Cleaning the Pads
After each use, remove the cleaning pads and wash them thoroughly. Ensure they are clean and dry before the next use. Replace worn or heavily soiled pads with new ones.
2. Ngabersihkeun Robot
Wipe the exterior of the WINBOT W930 with a soft, dry cloth. Do not use abrasive cleaners or immerse the robot in water.
3. Storing the Robot
Store the WINBOT W930 in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is charged before long-term storage.
Image: The ECOVACS WINBOT W930 window cleaning robot, ready for storage or use.
Gambar: Ngabeledug view diagram showing the internal components and cleaning pad assembly of the WINBOT W930.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Robot does not power on or has a green flashing light. | Batré internal teu dieusian. | Connect the robot to the power adapter and allow it to charge for several hours until the light is solid or off. |
| Robot does not move or slides on the window. | Cleaning pads are too wet or not sufficiently damp. | Ensure cleaning pads are only lightly dampened. If too wet, replace with drier pads. If too dry, lightly re-dampen. |
| Streaks or marks left on the window. | Pads are dirty or cleaning solution is insufficient/excessive. | Replace cleaning pads with clean ones. Adjust the amount of cleaning solution. For very dirty windows, pre-clean or run multiple cycles with fresh pads. |
| Robot stops unexpectedly or does not complete the cycle. | Obstacle detected (e.g., window handle) or temporary loss of suction. | Ensure the window surface is clear. If it stops due to an obstacle, use the remote control to guide it past the obstacle. Check for secure vacuum seal. |
| Robot ragrag tina jandela. | Safety tether not attached or vacuum seal compromised. | Always ensure the safety tether is securely attached before operation. Check for proper placement and secure vacuum seal. Do not use on damaged glass. |
spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | WINBOT 930 |
| Dimensi produk | 30.7 x 30.7 x 12.4 cm |
| Item Beurat | 3.2 kg |
| Faktor Bentuk | Portabel |
| Batré Diperlukeun | No (Internal rechargeable battery for safety backup) |
| Batré Kadali Jauh | 2 batré AAA |
| Komponén Kaasup | Manual, Kadali Jauh |
| ASIN | B00OJ768SS |
| Manufacturer Discontinued | Sumuhun |
Garansi sareng Rojongan
For warranty information and technical support, please refer to the documentation provided at the time of purchase or visit the official ECOVACS websitus. Simpen resi pameseran anjeun salaku bukti pameseran.
For further assistance, you may contact ECOVACS customer service through their official channels.
