1. Bubuka
This manual provides essential information for the safe and efficient use of your Gewiss GW30411 Electronic 2-Channel Programmer. Please read these instructions carefully before installation and operation, and retain them for future reference. The GW30411 is designed for precise control of electrical circuits over time.
2. Émbaran Kasalametan
PERHATOSAN: Résiko shock listrik. Pamasangan sareng pangropéa ngan kedah dilakukeun ku tanaga anu mumpuni.
- Sok pegatkeun sambungan kakuatan sateuacan masang atanapi ngalayanan alat.
- Pastikeun sadaya kabel saluyu sareng kode sareng peraturan listrik lokal.
- Ulah nepikeun alat ka beueus, suhu ekstrim, atawa lingkungan korosif.
- Do not attempt to open or modify the device; there are no user-serviceable parts inside.
- Jauhkeun tina jangkauan barudak.
3. Produk Langkungview
The Gewiss GW30411 is an electronic 2-channel programmer designed for managing electrical loads with timed switching. It features a clear digital display and intuitive controls for setting programs.
Gambar 1: Hareupeun view of the Gewiss GW30411 Programmer. The display shows the current time (10:22), day (VE 13 GIU, likely Friday 13th June), and the 'ON' status, indicating an active program. Buttons for navigation and setting are visible on the right side.
Fitur konci:
- Digital display for time and program status.
- Two independent channels for flexible programming.
- Manual override function.
- Desain kompak pikeun instalasi gampang.
4. Setup jeung Instalasi
Installation should be carried out by a qualified electrician. Ensure the main power supply is disconnected before proceeding.
4.1 Pamasangan
Mount the programmer in a suitable electrical enclosure or on a DIN rail, ensuring adequate ventilation and protection from environmental factors.
4.2 Kabel
- Identify the power supply terminals (L and N) and connect them according to the wiring diagram provided with the product packaging.
- Connect the load wires for Channel 1 and Channel 2 to their respective output terminals.
- Double-check all connections for security and correctness before restoring power.
Refer to the detailed wiring diagram included in the product packaging for specific terminal assignments.
5. Parentah Operasi
After successful installation and power-up, the device will display the current time or a default setting. Use the buttons on the right side of the unit to navigate menus and set parameters.
5.1 Setélan Waktos sareng Tanggal Awal
- Pencét éta MENU button (if available, or the primary setting button) to enter the settings mode.
- Arahkeun ka Waktos / Tanggal setelan ngagunakeun luhur/handap kancing.
- Adjust the hour, minute, day, month, and year using the +/- or luhur/handap kancing.
- Konfirmasi unggal setélan nganggo Asupkeun or OK kancing.
5.2 Programming on / off Siklus
The GW30411 allows you to set specific ON/OFF times for each of its two channels.
- Lebetkeun mode programming ku mencét tombol PROG kancing.
- Select the desired channel (Channel 1 or Channel 2).
- Setel nu dipikahoyong ON time (hour and minute) for the first event.
- Setel nu dipikahoyong Pareum time (hour and minute) for the first event.
- Specify the days of the week for which the program should be active.
- Simpen program sareng kaluar tina modeu pamrograman.
5.3 Manual Override
Pikeun ngabatalkeun jadwal anu diprogram samentawis, anggo ON/OFF or MANUAL button. This typically cycles through ON, OFF, and AUTO modes. The display will indicate the current manual status.
6. Pangropéa
The Gewiss GW30411 programmer requires minimal maintenance.
- beberesih: Ngusap bagian luar ku kaén anu lembut sareng garing. Ulah make cleaners abrasive atawa pangleyur.
- Pamariksaan: Periodically check for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.
7. Cara ngungkulan
If you encounter issues with your GW30411 programmer, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Paparanana kosong. | Taya catu daya. | Pariksa pemutus sirkuit sareng sambungan kabel. |
| Programmed events are not activating. | Incorrect time/date setting; Program not saved; Manual override active. | Verify time/date; Re-enter and save program; Check manual override status. |
| Alatna teu ngaréspon. | glitch software samentara. | Disconnect power for 30 seconds, then restore. If problem persists, contact support. |
8. Spésifikasi
- merek: Gewiss
- model: GW30411
- Tipe: Electronic 2-Channel Programmer
- Pabrikan: GEWISS
- ASIN: B00OM8R0GS
- Kasadiaan Suku Cadang: Inpormasi teu sayogi
- Pembaruan Parangkat Lunak Dijamin dugi ka: Inpormasi henteu sayogi
- Date Listed on Amazon.com.be: 20 Méi 2022
9. Garansi jeung Rojongan
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Gewiss products are designed for reliability and performance.
If you require technical assistance or have questions not covered in this manual, please contact Gewiss customer support or your authorized distributor. Ensure you have your product model number (GW30411) and purchase details ready.
