1. Bubuka
This manual provides essential information for the safe and effective installation, operation, and maintenance of the ABB S201-C20 Miniature Circuit Breaker. Please read this manual thoroughly before attempting any installation or operation. Retain this manual for future reference.
The ABB S201-C20 is a single-pole miniature circuit breaker designed to protect electrical circuits from overcurrents, which can result from overload or short circuit. It is suitable for use in various electrical distribution systems.
2. Émbaran Kasalametan
PERHATOSAN: Résiko Setrum Listrik atanapi Seuneu.
- Pamasangan sareng pangropéa kedah dilakukeun ku tanaga anu mumpuni sareng diidinan hungkul.
- Always disconnect power at the main supply before working on electrical circuits or equipment.
- Pastikeun grounding sareng kabelna leres saluyu sareng kode listrik lokal sareng nasional.
- Ulah ngoperasikeun pemutus sirkuit upami katingalina ruksak atanapi kakeunaan gaya anu kaleuleuwihi.
- Ulah ngaliwat atawaamper with the circuit breaker's protective functions.
- Anggo alat pelindung pribadi (PPE) anu pas nalika damel sareng sistem listrik.
3. Produk Langkungview
The ABB S201-C20 is a robust miniature circuit breaker designed for reliable circuit protection. Key features include:
- Single-pole configuration.
- Rated for 277V operation.
- 20 Amps current rating.
- Designed for DIN rail mounting.
- Provides protection against overloads and short circuits.
Figure 1: ABB S201-C20 Miniature Circuit Breaker. This image displays the compact design of the single-pole circuit breaker, ready for DIN rail installation.
4. Setup jeung Instalasi
Installation of the ABB S201-C20 circuit breaker should only be performed by a qualified electrician in accordance with all applicable electrical codes and standards.
- Pegatkeun daya: Ensure that the main power supply to the circuit where the breaker will be installed is completely disconnected and locked out. Verify with a voltage panguji.
- Pamasangan: The S201-C20 is designed for DIN rail mounting. Snap the circuit breaker onto the DIN rail securely.
- Wiring:
- Connect the incoming line wire to the top terminal of the circuit breaker.
- Connect the outgoing load wire to the bottom terminal of the circuit breaker.
- Pastikeun sadaya sambungan kedap tur aman pikeun nyegah kontak leupas sarta overheating.
- Anggo alat ukur kawat anu pas pikeun 20 Amp meunteun.
- Verifikasi: Double-check all wiring connections for correctness and tightness. Ensure no bare wires are exposed.
- Kandang: Close the electrical panel or enclosure securely after installation.
- Pamulihan kakuatan: Restore power to the main supply.
5. Parentah Operasi
The ABB S201-C20 circuit breaker operates with a simple toggle switch mechanism.
- Hurungkeun: Push the toggle switch to the "ON" position (typically upwards). This closes the circuit, allowing current to flow.
- Pareuman: Push the toggle switch to the "OFF" position (typically downwards). This opens the circuit, stopping current flow.
- Tripping: In the event of an overload or short circuit, the circuit breaker will automatically trip to the "OFF" or an intermediate position to protect the circuit.
- Resetting after Trip: If the breaker trips, first identify and rectify the cause of the overload or short circuit. Then, fully push the toggle switch to the "OFF" position before attempting to reset it to "ON". If the breaker immediately trips again, do not force it; consult a qualified electrician.
6. Pangropéa
The ABB S201-C20 circuit breaker is designed for minimal maintenance. However, periodic inspection is recommended to ensure continued safe operation.
- Inspeksi Visual: Periodically inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections. Ensure the toggle switch moves freely.
- beberesih: If necessary, gently clean the exterior of the circuit breaker with a dry, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure power is disconnected before cleaning.
- Pariksa profésional: For critical applications or if any issues are observed, consult a qualified electrician for a professional inspection and testing.
7. Cara ngungkulan
Bagian ieu alamat masalah umum Anjeun bisa sapatemon kalawan circuit breaker Anjeun.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Circuit breaker lalampahan sering. | Kaleuwihan beban dina sirkuit, korsleting, atanapi alat anu rusak. | Reduce the load on the circuit. Unplug appliances one by one to identify the faulty one. Inspect wiring for short circuits. If the problem persists, consult an electrician. |
| Pemutus sirkuit teu tiasa di-reset. | Overload pengkuh atawa sirkuit pondok, atawa sesar breaker internal. | Ensure the cause of the trip has been resolved. Try pushing the switch fully to "OFF" before resetting to "ON". If it still doesn't reset, do not force it; contact a qualified electrician. |
| Taya kakuatan pikeun sirkuit, tapi breaker ON. | Loose wiring connection, fault in the circuit beyond the breaker, or main power supply issue. | Check all connections. Verify main power supply. Consult an electrician to diagnose the circuit. |
8. Spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | S201-C20 |
| merek | BUAH ARA |
| Jumlah kutub | 1 |
| Peunteun ayeuna | 20 Amps |
| Voltage Peunteun | 277V |
| Sirkuit Tipe Breaker | Standard Miniature Circuit Breaker |
| Tipe Pamasangan | DIN Rail Gunung |
| Ukuran (Kira-kira.) | 4.53 x 3.27 x 1.22 inci |
| Beurat (Kira-kira.) | 4.41 ons |
9. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries regarding your ABB S201-C20 Miniature Circuit Breaker, please refer to the official ABB website or contact ABB customer service directly. Keep your purchase receipt as proof of purchase.
Anjeun tiasa manggihan inpo nu leuwih lengkep sareng wincik kontak dina ABB Official Store.
