ABB S202-C16 Miniatur Circuit breaker Manual Pamaké

1. Bubuka

This manual provides essential information for the safe and effective installation, operation, and maintenance of the ABB S202-C16 Miniature Circuit Breaker. Please read this manual thoroughly before installation or use and retain it for future reference. This device is designed to protect electrical circuits from overcurrents, which can result from overload or short circuit.

Bewara Kasalametan Penting: Installation and maintenance of electrical equipment should only be performed by qualified and authorized personnel in accordance with all local and national electrical codes and regulations. Failure to follow these instructions can result in serious injury, death, or property damage.

2. Produk Langkungview

The ABB S202-C16 is a 2-pole miniature circuit breaker with a C-curve tripping characteristic and a 16 Amp current rating, designed for 110 Volt systems. It provides reliable protection for various electrical applications.

Gambar 1: Hareupeun view of the ABB S202-C16 Miniature Circuit Breaker. This image shows the white housing, two black toggle switches for circuit control, and connection terminals.

Fitur konci:

• 2-Pole design for protection of two conductors.
• C-curve tripping characteristic for general applications.
• 16 Amp rated current.
• Suitable for 110 Volt AC systems.
• Pamasangan témbok.
• UL and CSA certified.

3. Parentah Kasalametan

• Salawasna pegatkeun daya dina panel layanan utama sateuacan masang atanapi ngalayanan pemutus sirkuit.
• Anggo alat pelindung pribadi (PPE), sapertos sarung tangan insulasi sareng kacamata kaamanan.
• Pastikeun sadaya sambungan kabel anu kedap tur aman pikeun nyegah overheating sarta bahaya seuneu.
• Entong nganggo pemutus sirkuit upami katingalina ruksak.
• Consult a qualified electrician if you are unsure about any part of the installation or operation.
• Adhere to all local and national electrical codes (e.g., NEC in the USA).

4. Instalasi (Setup)

4.1 Alat Diperlukeun:

• Screwdriver (appropriate size for terminals)
• Striper kawat
• Voltage panguji
• Alat Pelindung Diri (APD)

4.2 Léngkah-léngkah Pamasangan:

1. Pegatkeun daya: Locate the main service panel and turn off the main circuit breaker to completely de-energize the electrical system. Verify with a voltage tester that power is off.
2. Pamasangan: The S202-C16 is designed for wall mounting. Securely attach the circuit breaker to a suitable mounting surface within an appropriate enclosure, following manufacturer guidelines for panelboard or enclosure installation.
3. Wiring:
   • Connect the incoming line wires to the designated line terminals (typically at the top).
   • Connect the outgoing load wires to the designated load terminals (typically at the bottom).
   • Ensure proper wire gauge is used for the 16 Amp rating and 110 Volt system.
   • Tighten all terminal screws to the specified torque settings (refer to device markings if available, otherwise consult general electrical standards).
4. Verifikasi: Double-check all connections for tightness and correct polarity. Ensure no bare wires are exposed.
5. Panutup kandang: Close the panelboard or enclosure cover securely.
6. Pamulihan kakuatan: Turn the main circuit breaker back on.

5. Operasi

The ABB S202-C16 Miniature Circuit Breaker features two toggle switches, one for each pole, to control the flow of electricity.

• Posisi ON: Push the toggle switch(es) fully upwards to the 'ON' position to allow current to flow through the circuit.
• Posisi OFF: Push the toggle switch(es) fully downwards to the 'OFF' position to interrupt current flow and de-energize the circuit.
• Posisi TRIPPED: If an overcurrent (overload or short circuit) occurs, the circuit breaker will automatically trip. The toggle switch(es) will move to an intermediate or 'TRIPPED' position (often center or slightly below center). To reset a tripped breaker, first move the switch(es) fully to the 'OFF' position, then push it/them fully to the 'ON' position.

Note: If the circuit breaker repeatedly trips, do not attempt to force it on. This indicates a persistent fault in the circuit that must be investigated and resolved by a qualified electrician.

6. Pangropéa

The ABB S202-C16 Miniature Circuit Breaker is designed for minimal maintenance. However, periodic inspection is recommended to ensure optimal performance and safety.

• Inspeksi Visual (Taunan): With power disconnected, visually inspect the circuit breaker for any signs of physical damage, discoloration, loose connections, or corrosion.
• beberesih: If necessary, gently clean the exterior of the circuit breaker with a dry, lint-free cloth. Do not use liquid cleaners or solvents.
• Kakuatan Terminal: Periodically check the tightness of terminal connections, especially after initial installation and during routine electrical system checks. Ensure power is off before checking terminals.

Do not attempt to open or repair the circuit breaker. There are no user-serviceable parts inside. If the device is damaged or malfunctioning, it must be replaced by a qualified professional.

7. Cara ngungkulan

8. Spésifikasi Téknis

9. Garansi jeung Rojongan

Specific warranty details for the ABB S202-C16 Miniature Circuit Breaker are typically provided at the point of purchase or can be found on the official ABB websitus. Punten tingal dokuméntasi pameseran anjeun kanggo masa garansi sareng istilah.

For technical support, product inquiries, or warranty claims, please contact ABB customer service or visit the official ABB websitus:

• ABB Official Websitus: www.abb.com
• Palayanan palanggan: Refer to the contact information provided on the ABB websitus pikeun wewengkon husus Anjeun.