Bubuka
The Soundstream T1.4000DL is a high-performance Tarantula Series Mono-Block Class D Car Amplifier designed to deliver powerful audio output for your vehicle's sound system. This amplifier features a Pulse Width Modulated MOSFET power supply with Audiophile Grade IRTM Transistors and a 12-point RGB LED lighting system for visual customization. This manual provides essential information for the proper installation, operation, and maintenance of your amplifier pikeun mastikeun kinerja optimal sareng umur panjang.
Émbaran Kasalametan
- Salawasna pegatkeun sambungan batré kandaraan urang saméméh ngajalankeun sagala pagawean listrik.
- Ensure all wiring is correctly routed and secured to prevent damage or short circuits.
- Use appropriate gauge power and ground wires. A 1/0 gauge wire is recommended for optimal performance and safety.
- Pasang éta ampLifier di lokasi anu ngamungkinkeun pikeun ventilasi nyukupan pikeun nyegah overheating.
- Cocog jeung amplifier's impedance to your speakers or subwoofers to prevent damage to either component.
- Pamasangan profésional disarankeun pikeun kinerja sareng kaamanan anu optimal.
- Produk ieu tiasa ngandung bahan kimia anu dipikanyaho ku Nagara California pikeun nyababkeun kanker sareng cacad kalahiran atanapi cilaka réproduktif sanés. Ngumbah leungeun sanggeus nanganan.
Eusi pakét
Pastikeun yén sadaya item aya dina bungkusan:
- Soundstream T1.4000DL Mono-Block Class D Car Amppangagung
- Remote Bass Control Knob
- Pamasangan Hardware
- Manual pangguna (dokumén ieu)
Setup sareng Instalasi
Pamasangan anu leres penting pisan pikeun pagelaran sareng umur panjang anjeun amppanguat. Turutan léngkah-léngkah ieu kalawan saksama:
1. Pamasangan Amppangagung
Choose a secure location that provides sufficient airflow around the amplifier. Avoid mounting it directly on carpet or in enclosed spaces without ventilation. Use the provided mounting hardware to secure the ampngalemeskeun pageuh.
2. Sambungan Listrik sareng Tanah
Connect the power cable (1/0 gauge recommended) from the vehicle's battery to the amplifier's B+ terminal. Ensure an inline fuse (not included, but essential) is installed within 18 inches of the battery. Connect a ground cable of the same gauge from the amplifier's GND terminal to a clean, unpainted metal surface on the vehicle chassis. The remote turn-on wire should be connected from your head unit's remote output to the ampterminal REM liifier.
3. Sambungan Input Audio
Sambungkeun kabel RCA tina unit sirah anjeunamp outputs kana amplifier's RCA input jacks. Ensure proper left and right channel connections if applicable, though this is a mono-block amppangagung.
4. Speaker/Subwoofer Connections
Sambungkeun subwoofer anjeun ka amplifier's speaker output terminals. Pay close attention to polarity (+ to + and - to -). Ensure the total impedance of your connected subwoofers matches the amplifier's stable operating impedance (e.g., 1 ohm, 2 ohms, or 4 ohms).
5. Remote Bass Control (Optional)
Plug the remote bass control knob into the designated port on the amplifier. This allows for convenient adjustment of bass levels from the driver's seat.
Gambar: Tukangeun view of the Soundstream T1.4000DL amplifier, highlighting the various input and output terminals for power, ground, remote, RCA audio, and speaker connections.
Parentah Operasi
1. Mimiti Power-Up
Once all connections are secure, reconnect the vehicle's battery. Turn on your head unit. The amplifier's power indicator LED (green) should illuminate, indicating it is receiving power and operating normally.
2. Adjusting Gain
The gain control on the amplifier matches the output voltage tina unit sirah anjeun ka amplifier's input. Start with the gain set to minimum. Play a familiar track at about 75% of your head unit's maximum volume. Slowly increase the amplifier's gain until you hear distortion, then back it off slightly. This ensures maximum clean output.
3. Setélan Crossover
The T1.4000DL features adjustable crossover settings. For subwoofers, set the Low Pass Filter (LPF) to filter out high frequencies, typically between 80Hz and 120Hz, depending on your subwoofer and personal preference. The Subsonic Filter (SSF) should be set just below your subwoofer's port tuning frequency to protect it from playing frequencies too low.
4. Bass naekeun
The bass boost control allows you to enhance low frequencies. Use this sparingly and adjust carefully to avoid distortion and potential damage to your subwoofers.
5. Indikator LED
- LED Héjo: Nunjukkeun ka ampliifier hurung sareng tiasa dianggo normal.
- LED Beureum: Nunjukkeun ka amplifier is in protection mode due to a fault (e.g., overheating, short circuit, low impedance).
6. RGB LED Lighting System
The amplifier features a 12-point RGB LED lighting system. A switch on the end panel allows you to change the color to several presets, initiate a slow-motion color change, or rapid flashing random colors. During slow-motion color change, a single color can be selected for custom installations.
Pangropéa
To ensure the longevity and optimal performance of your Soundstream T1.4000DL ampLifier, turutan tungtunan pangropéa ieu:
- beberesih: Ngusap périodik ampexterior lifier urang ku lemes, lawon garing. Hindarkeun ngagunakeun bahan kimia anu kasar atanapi pembersih abrasive.
- Ventilasi: Pastikeun yén amplifier's cooling fins are free from dust and debris. Blocked fins can lead to overheating.
- Sambungan: Regularly check all power, ground, remote, and speaker connections to ensure they are tight and free from corrosion. Loose connections can cause performance issues or damage.
- Pamariksaan kabel: Inspect all wiring for signs of wear, fraying, or damage. Replace any compromised wiring immediately.
Pamérésan masalah
Upami anjeun ngalaman masalah sareng anjeun ampLifier, tingal masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| No Power (No Green LED) | Sekring putus, kabel daya/ground/remote kendor, output remote head unit rusak. | Check inline fuse near battery. Verify all power, ground, and remote connections are secure. Test remote wire for 12V when head unit is on. |
| Protection Mode (Red LED) | Overheating, short circuit in speaker wiring, impedance too low, DC offset. | Nyanggakeun amplifier to cool down. Check speaker wiring for shorts. Verify speaker impedance matches amplifier's stable rating. Disconnect speakers and check if red LED turns off. |
| Taya Kaluaran Audio | Loose RCA cables, incorrect gain setting, faulty speakers/subwoofers, head unit issue. | Ensure RCA cables are securely connected. Adjust gain. Test speakers/subwoofers with another amplifier. Check head unit output. |
| Sora Distort | Gain set too high, improper crossover settings, poor quality audio source, damaged speakers. | Reduce gain. Adjust LPF/SSF settings. Test with a different audio source. Inspect speakers for damage. |
| RCA Inputs Stop Receiving Signal | Damaged RCA inputs, internal ampkasalahan liifier. | Test with new RCA cables. If problem persists, contact customer support for service. |
spésifikasi
- model: T1.4000DL
- Tipe: Mono-Block Class D Car Amppangagung
- Peunteun Kakuatan RMS:
- 4 ohms: 700 watts x 1 channel
- 2 ohms: 1,300 watts x 1 channel
- 1 ohm: 2,000 watts x 1 channel
- Kaluaran Kakuatan Max: 4,000 watt
- Sasayogian tanaga: Pulse Width Modulated MOSFET with Audiophile Grade IRTM Transistors
- Indikator: LED power (green) and protect (red)
- ukuran: 22.3 x 11.8 x 3.8 inci
- beurat: 9.9 pon
Garansi sareng Rojongan
Soundstream products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Soundstream website. If you encounter any issues not covered in this manual or require technical assistance, please contact Soundstream customer support through their official channels.
