True TRUE988284

Buku Panduan Pakakas Kontrol Suhu True 988284 077B6856

Model: TRUE988284

1. Produk Langkungview

The True 988284 Temperature Control Kit 077B6856 is a genuine Original Equipment Manufacturer (OEM) replacement part designed for True Refrigeration units. This kit ensures the proper regulation of temperature within your commercial refrigeration equipment, maintaining optimal operating conditions for safety, reliability, and performance.

True 988284 Temperature Control Kit with dial and capillary tube

Gambar 1.1: Leuwihview of the True 988284 Temperature Control Kit, showing the control unit, dial, and capillary tube.

Fitur konci:

2. Émbaran Kasalametan

penting: Read all instructions carefully before installation or operation. Failure to follow these instructions may result in property damage, personal injury, or death.

3. Eusi Paket

Pastikeun yén sadaya komponén aya sareng henteu ruksak nalika muka bungkusan.

Components of the True 988284 Temperature Control Kit including control unit, dial, screws, and connectors

Image 3.1: Contents of the True 988284 Temperature Control Kit, typically including the control module, temperature dial, mounting screws, and electrical connectors.

4. Parentah instalasi

This section provides general guidance for replacing a temperature control kit. Specific installation steps may vary depending on your True Refrigeration model. Refer to your unit's service manual for detailed, model-specific instructions.

  1. Pegatkeun Daya: Locate the main power supply to the refrigeration unit and disconnect it. Verify that power is off using a voltage panguji.
  2. Access Control Area: Depending on your unit, you may need to remove access panels or grilles to reach the existing temperature control.
  3. Wiring Dokumén: Before disconnecting any wires, take clear photos or make a diagram of the existing wiring connections to the old temperature control. Note the position of the capillary tube sensor.
  4. Hapus Control Old:
    • Carefully disconnect the electrical wires from the old control.
    • Unmount the old control from its housing.
    • Gently remove the capillary tube sensor from its sensing location (e.g., evaporator coil, air return).
  5. Install New Control:
    • Insert the new capillary tube sensor into the exact same sensing location as the old one. Ensure it is securely positioned for accurate temperature readings. Avoid kinking or damaging the tube.
    • Mount the new temperature control module in the same position as the old one using the provided screws.
    • Connect the electrical wires to the new control according to your documented wiring diagram. Ensure connections are secure.
  6. Pasang deui: Ganti panel aksés atanapi kisi-kisi anu parantos dicabut.
  7. Mulangkeun Daya: Reconnect the main power supply to the refrigeration unit.
  8. Operasi tés: Allow the unit to run for a period and monitor the temperature to ensure proper operation and temperature regulation. Adjust the dial as needed.

Catetan: If you are unsure about any step, consult a qualified refrigeration technician.

5. Parentah Operasi

The temperature control kit features a rotary dial for adjusting the desired temperature within your True Refrigeration unit.

6. Pangropéa

The True 988284 Temperature Control Kit is designed for durability and reliability. Regular maintenance of the overall refrigeration unit is crucial for its longevity and efficient operation.

7. Cara ngungkulan

If your refrigeration unit is experiencing temperature issues after installing this kit, consider the following common troubleshooting steps:

MasalahMungkin Cukang lantarananaSolusi
Unit not cooling or too warm
  • Temperature dial set too high (warmer)
  • Capillary tube not properly seated or damaged
  • sambungan listrik leupas
  • Other refrigeration system issues (e.g., low refrigerant, dirty condenser)
  • Adjust dial to a colder setting.
  • Verify capillary tube placement and condition.
  • Check and secure all wiring connections (with power disconnected).
  • Consult a qualified technician for system diagnosis.
Unit freezing contents or too cold
  • Temperature dial set too low (colder)
  • Capillary tube sensing incorrect temperature (e.g., too close to evaporator)
  • Kasalahan unit kontrol
  • Adjust dial to a warmer setting.
  • Ensure capillary tube is correctly positioned away from direct evaporator contact if applicable.
  • If issues persist, the control unit may require replacement or further diagnosis by a technician.
Suhu robah-robah pisan
  • Improper capillary tube placement
  • Kasalahan unit kontrol
  • Refrigeration system issues
  • Verify capillary tube placement.
  • Taroskeun ka teknisi anu mumpuni pikeun diagnosis.

Awas: Do not attempt repairs beyond your technical capabilities. Always prioritize safety and consult a professional for complex issues.

8. Spésifikasi

FiturRincian
merekLeres
Nomer modélBENER988284
Dimensi produk6 x 6 x 4 inci
Item Beurat4.8 ons
Modeu OperasiOtomatis
Tipe KontakBiasana Buka
Tipe PanyambungTerminal screw
Terminalsekrup
Jinis Sirkuit1-jalan
Tipe PamasanganPermukaan Gunung
Tipe AktuatorPencét Tombol
Bahan KontakTambaga, Kuningan
Tanggal Kahiji Sadia15 Juni 2011

9. Garansi jeung Rojongan

As a genuine OEM part, this True 988284 Temperature Control Kit is manufactured to high standards. For specific warranty information, please refer to the documentation provided with your original True Refrigeration unit or contact True Refrigeration directly.

Rojongan Palanggan:

For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please contact True Refrigeration customer support or an authorized service provider.

Dokumén Patali - BENER988284

Praview Leres Kommerzielle Kühltechnik: Allgemeiner Regelungsleitfaden
Umfassender Leitfaden zur Bedienung, Einstellung und Fehlerbehebung von Temperaturregelungen dina True kommerziellen Kühl- und Gefriergeräten. Enthält Anleitungen für mechanische und elektronische Steuerungen sowie spezifische Modellinformationen.
Praview Manual Pamasangan Manufaktur TRUE Pituduh Mimitian Gancang
Dokumén ieu nyayogikeun pedoman pamasangan, operasi, sareng pangropéa penting pikeun alat-alat pendingin sareng pemanasan komérsial TRUE Manufacturing. Éta kalebet peringatan kaamanan, spésifikasi, prosedur setelan, sareng pitunjuk perawatan.
Praview Leres TH Models dipanaskeun Manual Instalasi Kabinet
Pamasangan komprehensif, operasi, jeung pituduh pangropéa pikeun Leres TH Models cabinets dipanaskeun. Nyertakeun inpormasi kaamanan, listrik, setelan, perawatan, sareng garansi ti True Manufacturing Co., Inc.
Praview Manual Pamasangan sareng Operasi Kulkas/Freezer Komersial True T-23DF-HC
Pituduh pamasangan, operasi, pangropéa, sareng kaamanan anu lengkep pikeun kulkas/freezer komérsial dual-chamber True T-23DF-HC. Ngawengku ngungkulan masalah, pitunjuk beberesih, sareng inpormasi garansi.
Praview Manual Pamasangan Seri True CVM
Manual pamasangan, operasi, sareng pangropéa anu lengkep pikeun unit pendingin séri True CVM. Ngawengku tindakan pencegahan kaamanan, sarat listrik, prosedur pamasangan, perataan, penyegelan, pemasangan rak, sareng pangropéa umum.
Praview Manuel d'Installation et de Démarrage Rapide True
Pituduh lengkep pikeun instalasi, pamakéan sarta pamakéan appareils de refrigeration jeung congélation True Manufacturing Co., Inc. Includes des informations de sécurité essentielles et des ressources pour le support.