1. Bubuka
This manual provides essential information for the proper installation, operation, and maintenance of your Datalogic QuickScan Lite QW2100 Bar Code Reader. The QW2100 is an entry-level linear imager designed for reading long, truncated 1D bar codes, commonly found in retail, light industrial, document processing, and office environments. Its ergonomic design ensures user comfort during daily operations.
Please read this manual thoroughly before using the device to ensure safe and efficient operation.
2. Émbaran Kasalametan
Perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu sareng karusakan kana alat:
- Ulah ngalaan alat ka suhu ekstrim, kalembaban, atawa sinar panonpoé langsung.
- Ulah nepi ka alat muragkeun atawa kakeunaan dampak anu parah.
- Ulah nyobian muka atawa ngaropéa alat. Rujuk sadayana jasa ka tanaga anu mumpuni.
- Jaga jandela scan tetep bersih pikeun mastikeun kinerja anu optimal.
- Use only Datalogic-approved accessories and power supplies.
3. Eusi Paket
Pastikeun yén sadaya item aya dina bungkusan:
- Datalogic QuickScan Lite QW2100 Bar Code Reader
- USB Cable (if USB interface model) or RS-232/Keyboard Wedge Cable
- Quick Start Guide (refer to this manual for full instructions)
- Optional: Stand (if purchased as a kit)
4. Produk Langkungview
The Datalogic QuickScan Lite QW2100 features a compact and ergonomic design for comfortable handheld use. Key components include:
- Jandela scanning: Emits the scan line and reads bar codes.
- Tombol pemicu: Aktipkeun prosés scanning.
- Indikator LED: Provides feedback on scanning status (e.g., successful read, error).
- Cable Connector Port: For connecting the interface cable.
5. Setélan
Follow these steps to set up your QW2100 Bar Code Reader:
- Sambungkeun kabel: Insert the appropriate interface cable (USB or RS-232/Keyboard Wedge) into the connector port at the base of the scanner. Ensure a secure connection.
- Nyambung ka Alat Host:
- Antarmuka USB: Plug the USB connector into an available USB port on your computer or POS system. The operating system should automatically detect and install the necessary drivers.
- RS-232/Keyboard Wedge Interface: Connect the cable to the corresponding port on your host device. Configuration may be required using Datalogic Aladdin software or by scanning configuration bar codes (refer to the full programming manual for details).
- Daya Hurung: The scanner typically powers on automatically once connected to the host device. The indicator LED may illuminate to confirm power.
- Optional Stand Setup: If using the optional stand, assemble it according to its instructions and place the scanner in the stand for hands-free operation.
For advanced configuration, such as changing symbologies or interface settings, refer to the Datalogic Aladdin Configuration Software or the comprehensive programming manual.
6. Parentah Operasi
To scan a bar code with your QW2100 reader:
- Tujuan: Point the scanning window of the reader at the bar code you wish to scan.
- Aktipkeun: Press and hold the trigger button. A bright scan line will project from the scanning window.
- Scan: Position the scan line across the entire bar code. The QW2100 is designed for wide-angle scanning, making it effective for long or wide codes.
- Konfirmasi: Upon a successful read, the scanner will emit an audible beep (if enabled) and the indicator LED will flash. Release the trigger button.
For optimal performance, ensure the bar code is clean and not excessively creased or damaged. Adjust the distance between the scanner and the bar code for the best read.
7. Pangropéa
Proper maintenance ensures the longevity and performance of your bar code reader:
- Ngabersihkeun Jandela Scanning: Make lawon anu lemes, teu aya serat dampened with a mild, non-abrasive cleaner (e.g., glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
- Ngabersihan Casing: Lap bagian luar casing kalawan lemes, damp lawon.
- Pamariksaan kabel: Regularly check the interface cable for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- Panyimpenan: Nalika henteu dianggo, simpen alat panyeken di tempat anu bersih sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Scanner teu hurung. | Cable not connected properly or host device not providing power. | Ensure the cable is securely connected to both the scanner and the host device. Try a different USB port or host device. |
| Scanner does not read bar codes. |
|
|
| Scanner reads intermittently. | Damaged cable or loose connection. | Check the cable for damage and ensure connections are secure. Replace cable if necessary. |
9. Spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | QW2120-BK |
| merek | Datalogika |
| Téhnologi konektipitas | USB Cable (also available in RS-232/Keyboard Wedge) |
| Sumber Daya | AC (via host device USB or external power supply for RS-232) |
| Laju Scan | 400 scan / detik |
| Ukuran produk (L x W x H) | 6.69 x 2.56 x 2.76 inci (17 x 6.5 x 7 cm) |
| Item Beurat | 4.2 ons |
| Warna | Hideung |
| Symbologies dirojong | Most standard 1D bar codes (e.g., EAN/UPC, Code 39, Code 128, Interleaved 2 of 5, etc.) |
10. Garansi jeung Rojongan
Datalogic products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Datalogic websitus.
For technical support, product registration, or to download the latest drivers and software (such as Datalogic Aladdin Configuration Software), please visit the Datalogic support portal or contact your local Datalogic representative.
Websitus: www.datalogic.com
