Produk Leuwihview
The GoControl GC-TBZ48 Z-Wave Battery-Powered Smart Thermostat offers advanced control over your home's heating and cooling system. It is designed for easy installation and integrates seamlessly with Z-Wave hubs, providing remote access and smart automation capabilities. This thermostat can be powered by four AA batteries or an HVAC system's 24-volt AC C-wire.
Gambar 1: Hareupeun view of the GoControl Smart Thermostat, showing the LCD display and control buttons.
Fitur konci
- Z-Wave Compatibility: Works with most Z-Wave hubs, including 2GIG GC2 panel.
- Pilihan Daya Ganda: Can be powered by 4 AA batteries (up to 2 years) or a 24-volt AC C-wire.
- HVAC System Support: Compatible with standard HVAC systems (2-stage heat & 2-stage cool) and heat pump HVAC systems (3-stage heat & 2-stage cool).
- Pemrograman Gampang: Features a 7-character scrolling display for simplified programming.
- Kontrol sora: Works with Alexa for voice control (hub and Alexa device sold separately).
- FLiRS Functionality: Supports Z-Wave FLiRS (Frequently Listening Routing Slave) for improved responsiveness.
- Firmware Upgradable: USB firmware upgrade capability.
Instalasi jeung Setup
1. Pancegahan Kasalametan
- Always turn off power to the HVAC system at the circuit breaker before installation.
- Ensure all wiring is performed by a qualified individual if you are unsure.
- Turutan sadaya kode listrik lokal.
2. Masang Termostat
The thermostat can be wall-mounted or installed on a single-gang junction box. Choose a location away from direct sunlight, drafts, and heat sources for accurate temperature readings.
3. Parentah Wiring
The GC-TBZ48 supports both battery power and 24V AC C-wire power. Refer to the wiring diagrams below for common HVAC system configurations. Ensure wires are securely connected to the appropriate terminals.
- Standard HVAC Systems: Connect R, W, Y, G, C (if using C-wire).
- Sistem Pompa Panas: Connect R, O/B, Y, G, C (if using C-wire), W2/Aux.
Note: Detailed wiring diagrams are typically found in the full PDF user guide. For specific wiring, consult the document linked in the product information.
The product description mentions a user guide PDF: Pituduh Pamaké (PDF)
4. Pamasangan batré
If not using the C-wire, install four AA alkaline batteries into the front-loading battery compartment. Ensure correct polarity. The thermostat is designed to operate for up to 2 years on battery power.
5. Z-Wave Pairing
- Put your Z-Wave hub into inclusion/pairing mode.
- On the thermostat, navigate to the menu and select "Install" or "Pair".
- The thermostat will display a confirmation once successfully paired.
- Configure the thermostat mode (e.g., "Heat-pump" mode) via the thermostat menu or your Z-Wave controller as needed.
Ngoperasikeun Thermostat
Kadali Manual
- Tombol MODE: Cycles through system operating modes: Off, Heat, Cool, Auto.
- Tombol kipas: Cycles through fan operation modes: Auto (fan runs only when heating/cooling) or On (fan runs continuously).
- Panah luhur/handap: Adjusts the temperature setpoint.
Kontrol Gelombang Z
Once paired with a Z-Wave hub, you can control the thermostat remotely via your hub's interface or associated mobile application. This includes:
- Changing system mode (Heat, Cool, Auto, Off).
- Adjusting temperature setpoints.
- Setting fan mode.
- Creating schedules and automation rules (functionality depends on your Z-Wave hub).
Pangropéa
- Ngagantian batré: Replace AA batteries approximately every 2 years, or when the low battery indicator appears on the display. Use high-quality alkaline batteries.
- beberesih: Ngusap bagian luar thermostat ku lembut, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Pembaruan firmware: Check the GoControl website or your Z-Wave hub manufacturer's support pages for available firmware updates. The thermostat supports USB firmware upgrades.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Thermostat teu powering on. | Dead batteries or no C-wire connection. | Replace batteries or verify C-wire connection and HVAC power. |
| Cannot pair with Z-Wave hub. | Hub not in inclusion mode, thermostat too far from hub, or interference. | Ensure hub is in inclusion mode. Move thermostat closer to hub. Check for Z-Wave network interference. Try excluding and re-including the device. |
| Sistem HVAC teu ngaréspon. | Incorrect wiring, HVAC power off, or thermostat mode incorrect. | Verify wiring connections. Check HVAC system's circuit breaker. Ensure thermostat is set to the correct system mode (Heat/Cool/Auto). |
| Bacaan suhu teu akurat. | Lokasi termostat kapangaruhan ku angin, sinar panonpoé langsung, atanapi sumber panas. | Relocate thermostat if possible. Allow 15 minutes for sensor adjustment after installation or significant temperature changes. |
spésifikasi
- Ngaran modél: GC-TBZ48
- Nomer Bagian: BRO-NTBZ48
- merek: GoControl
- Konektipitas: Z-Wave (Ver. 4.5.5), Z-Wave FLiRS
- Sumber Daya: 4 AA batteries (included) or 24V AC C-wire
- Jenis tampilan: LCD with 7-character scrolling display
- ukuran: 9.59 x 6.16 x 2.08 inci
- Beurat barang: 1.15 pon
- Bahan: palastik
- warna: Bodas
- Tipe Pamasangan: Wall Mount or Single-Gang Junction Box
- Sertifikasi: UL Didaptarkeun
- Controllers cocog: Nexia, Vera, GoControl, Amazon Alexa (via compatible hub), SmartThings
Émbaran jaminan
The GoControl GC-TBZ48 Smart Thermostat comes with a garansi 1 taun against manufacturer defects. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official GoControl documentation or contact customer support.
Rojongan Palanggan
For technical assistance, troubleshooting, or warranty inquiries, please contact GoControl customer support. Refer to the GoControl official websitus pikeun inpo kontak panganyarna.
Sumberdaya Online:
- Official GoControl Website (for support contact and product information)
- Pituduh Pamaké (PDF): https://manuals.plus/m/9d31e8db4621f9c765178be18fb86e60397d995b2bbf0055524db570ec6b144d
