Utilitech PPWB Plastic Submersible Utility Pump

1. Bubuka

Thank you for choosing the Utilitech PPWB Plastic Submersible Utility Pump. This battery-operated pump is designed for efficient water transfer from various locations such as boats, kayaks, pool covers, and aquariums. Its compact and portable design makes it ideal for on-the-go use.

Please read this manual thoroughly before operating the pump to ensure safe and effective use.

2. Émbaran Kasalametan

Salawasna turutan tindakan pencegahan kaamanan dasar nalika nganggo produk ieu pikeun ngirangan résiko kahuruan, sengatan listrik, atanapi cilaka ka jalma.

• Entong operate the pump with damaged cords or plugs.
• Entong pump flammable or explosive liquids such as gasoline, fuel oil, kerosene, etc.
• Entong use in areas where flammable vapors are present.
• Ensure the battery compartment is securely closed and dry before submerging the pump.
• Jauhkeun leungeun sareng pakean anu leupas tina bagian anu obah.
• This pump is designed for water only. Do not use for other liquids.
• Always remove batteries when the pump is not in use for extended periods.

3. Eusi Paket

• Utilitech PPWB Plastic Submersible Utility Pump
• 36-inch Garden Hose Adapter
• Instruksi Manual

4. Setélan

4.1 Pamasangan batré

The pump requires three (3) D-size alkaline batteries (sold separately).

1. Locate the top cover of the pump.
2. Push down gently on the top cover and twist counter-clockwise to unlock and remove it.
3. Carefully remove the battery pack from the center of the pump.
4. Insert three D-size alkaline batteries into the battery pack, ensuring correct polarity (+/-).
5. Place the loaded battery pack back into the pump's center compartment.
6. Align the top cover with the pump body, push down, and twist clockwise to secure it. Ensure it is tightly sealed to prevent water ingress.

4.2 Hose Attachment

The pump includes a 36-inch garden hose adapter for extended reach.

1. Uncoil the clear hose that wraps around the pump unit.
2. Attach the garden hose adapter to the threaded outlet on the pump.
3. Connect the other end of the hose to the desired drainage point or container.

Image: The Utilitech PPWB pump with its clear hose and garden hose adapter. The pump is white plastic with a handle on top and a perforated base.

5. Operasi

To operate the Utilitech PPWB pump:

1. Ensure batteries are correctly installed and the top cover is sealed.
2. Place the pump into the water you wish to drain. The pump is designed to float when the suction screen is removed, allowing for versatile placement.
3. Locate the on/off switch (typically a black button or lever on the side) and activate it to start the pump.
4. The pump will begin to transfer water at a rate of up to 3 gallons per minute (GPM) with a 36-inch lift.
5. Once the desired amount of water has been transferred or the area is drained, deactivate the on/off switch to stop the pump.
6. Remove the pump from the water and allow it to drain.

6. Pangropéa

Regular maintenance will prolong the life of your pump.

• beberesih: After each use, rinse the pump thoroughly with clean water to remove any debris or residue. Ensure the suction screen is clear.
• Panyimpenan: Store the pump in a dry, cool place when not in use. Remove batteries if storing for an extended period to prevent leakage.
• Perawatan batré: Replace batteries when the pump's performance diminishes. Do not mix old and new batteries or different types of batteries.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Utilitech websitus. Simpen resi pameseran anjeun salaku bukti pameseran.