Buku Panduan Pangguna Kontroler Monitor Pasif Palmer Monicon L

1. Bubuka

The Palmer Monicon L is a precise analog volume control designed for professional audio environments. It serves as an intermediary device between audio sources, such as computers or audio interfaces, and self-powered monitor loudspeakers. Its passive circuitry ensures signal integrity without coloration. The unit features LED indicators and a built-in headphone amplifier, which are powered by the included DC adapter.

This manual provides detailed instructions for the setup, operation, and maintenance of your Palmer Monicon L to ensure optimal performance and longevity.

Figure 1: Palmer Monicon L Passive Monitor Controller, front angled view. This image shows the main unit with its large stereo volume knob, smaller auxiliary volume and headphone knobs, and various input/output selection buttons.

2. Parentah Kasalametan penting

• Baca parentah ieu kalawan saksama sateuacan ngoperasikeun alat ieu.
• Tetep parentah ieu pikeun rujukan hareup.
• Perhatikeun sadaya peringatan dina produk sareng dina manual ieu.
• Entong nganggo alat ieu caket cai.
• Ngabersihan ngan ku kaén garing.
• Ulah meungpeuk sagala bukaan ventilasi. Pasang saluyu sareng parentah produsén.
• Entong dipasang di deukeut sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
• Ngan anggo kantétan/aksésori anu ditunjuk ku produsén.
• Rujuk sadayana jasa ka tanaga jasa anu mumpuni. Diperlukeun ngalayanan nalika aparatur ruksak ku cara naon waé, sapertos kabel catu daya atanapi colokan rusak, cairan tumpah atanapi barang murag kana aparatur, aparatur parantos kakeunaan hujan atanapi lembab, henteu beroperasi normal. , atawa geus turun.

3. Eusi Paket

Pastikeun sadaya item anu didaptarkeun di handap aya dina pakét anjeun:

• Palmer Monicon L Passive Monitor Controller
• DC Power Supply (15V, 200mA)

Figure 2: The included DC 15V 200mA power supply. This adapter provides power for the LED indicators and the headphone amppangagung.

4. Produk Langkungview

4.1 Kadali Panel hareup

Gambar 3: Top-handap view of the Palmer Monicon L front panel, highlighting the main controls and indicators.

• STEREO VOLUME Knob: Large central knob for precise control of the main stereo output volume.
• Kenop VOLUME AUX: Controls the volume level of the auxiliary input.
• Kenop HEADPHONE: Adjusts the output volume for the headphone jack.
• INPUT SELECTION (STEREO/AUX) Buttons: Selects between the main stereo input (1) and the auxiliary input (2).
• OUTPUT SELECTION (1/2) Buttons: Activates or deactivates output pairs 1 and 2. Both can be active simultaneously.
• STEREO MONO Button: Sums the stereo output signal into a mono signal.
• Tombol bisu: Silences all active outputs.
• PFL STEREO / PFL AUX Buttons: Pre-Fader Listen for the stereo and auxiliary inputs, allowing monitoring through headphones independently of the main volume.
• HEADPHONES Jack: 6.35 mm (1/4") TRS jack for connecting headphones.

4.2 Sambungan Panel Rear

Gambar 4: Tukangeun view of the Palmer Monicon L, showing all input and output connectors.

• DC 15V 200mA Input: Power input for the included DC adapter.
• MONO SUM Output: XLR connectors for a summed mono output, typically used for a subwoofer.
• OUTPUT 1 (L/R) XLR: Balanced XLR outputs for the first pair of monitor speakers.
• OUTPUT 2 (L/R) XLR: Balanced XLR outputs for the second pair of monitor speakers.
• STEREO INPUT (L/R) Combo Sockets: Balanced combo sockets (XLR/TRS) for the main stereo input.
• AUX INPUT (L/R) RCA & 3.5mm TRS: Auxiliary input featuring RCA connectors and a 3.5 mm TRS jack.

5. Setup jeung Sambungan

Follow these steps to connect your Palmer Monicon L to your audio system:

5.1 Sambungan Daya

1. Connect the included DC 15V 200mA power adapter to the "DC 15V 200mA" input on the rear panel of the Monicon L.
2. Plug the power adapter into a suitable wall outlet. The LED indicators on the front panel will illuminate.

5.2 Sambungan Input Audio

The Monicon L offers two distinct stereo input options:

1. Main Stereo Input (Input 1): Use balanced XLR or 1/4" TRS cables to connect your primary audio source (e.g., audio interface, mixer output) to the "STEREO INPUT L/R" combo sockets on the rear panel.
2. Auxiliary Input (Input 2): For secondary audio sources (e.g., computer, media player), use RCA cables to the "AUX INPUT L/R" RCA connectors or a 3.5 mm TRS cable to the "AUX INPUT" 3.5mm jack.

5.3 Sambungan Kaluaran Audio

The Monicon L provides multiple output options for your monitoring setup:

1. Monitor Speakers (Output 1 & 2): Connect your self-powered monitor speakers using balanced XLR cables to the "OUTPUT 1 L/R" and/or "OUTPUT 2 L/R" XLR connectors. You can connect up to two pairs of monitors.
2. Subwoofer (Mono Sum): If you use a subwoofer, connect it to the "MONO SUM" XLR output. This output provides a summed mono signal of the selected stereo input.
3. Headphone: Plug your headphones into the 6.35 mm (1/4") TRS "HEADPHONES" jack on the front panel.

Figure 5: A diagram illustrating typical connection scenarios for the Palmer Monicon L, showing inputs from an audio interface and a laptop, and outputs to two pairs of speakers and a subwoofer.

6. Operasi

This section details the functions of each control on your Monicon L.

6.1 Volume Control

• VOLUME STEREO: Rotate this large knob clockwise to increase the volume of the selected stereo output, and counter-clockwise to decrease it. This is the primary volume control for your monitor speakers.
• AUX VOLUME: Adjusts the input level for the auxiliary input source. This allows you to balance the volume of your auxiliary device before it reaches the main stereo volume control.
• HEADPHONE: Controls the listening volume for headphones connected to the front panel jack.

6.2 Pamilihan Input

• INPUT SELECTION (1/2): Press the "1" button to select the main stereo input (XLR/TRS combo sockets). Press the "2" button to select the auxiliary input (RCA/3.5mm TRS). Only one input can be active at a time.

6.3 Pilihan Kaluaran

• OUTPUT SELECTION (1/2): Press the "1" button to activate the first pair of monitor outputs (OUTPUT 1 L/R). Press the "2" button to activate the second pair of monitor outputs (OUTPUT 2 L/R). You can activate both outputs simultaneously to listen through both speaker pairs.

6.4 Fungsi Pemantauan

• STEREO MONO: Press this button to sum the stereo signal into a mono signal. This is useful for checking phase compatibility and how your mix translates to mono playback systems.
• Bisu: Press this button to instantly silence all active outputs. Press it again to restore the audio.
• PFL STEREO / PFL AUX: These buttons enable Pre-Fader Listen for the respective inputs. When activated, the selected input signal is routed directly to the headphone output, bypassing the main STEREO VOLUME control. This allows you to monitor an input source without affecting the main speaker output.

7. Pangropéa sarta perawatan

• beberesih: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the unit. Do not use liquid cleaners, aerosols, or solvents.
• Lingkungan: Keep the Monicon L away from direct sunlight, excessive heat, moisture, and dust.
• Panyimpenan: Upami nyimpen unit kanggo waktos anu lami, pegatkeun sambungan listrik sareng simpen di tempat anu tiis sareng garing.

8. Cara ngungkulan

9. Spésifikasi

Gambar 6: Diménsi view of the Palmer Monicon L, showing its width (9.4"), depth (3.3"), and height (2.4").

10. Garansi jeung Rojongan

For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Palmer websitus.

Should you encounter any issues or require technical assistance, please contact Palmer customer support through their official channels.

Palmer Websitus: www.palmer-germany.com