Utilitech Bodas Toél Lamp Kontrol

1. Produk Langkungview

The Utilitech Plug-in Touch Control Dimmer is designed to convert any lamp nganggo stop kontak logam kana l anu dikontrol ku toélamp. This device provides three distinct levels of illumination, allowing users to easily adjust lighting from a subtle night light to full brightness. Operation is simplified by merely touching the lamp's metal surface to cycle through light settings or to turn the lamp on and off. It is compatible with incandescent bulbs up to 200 watts and is engineered for straightforward installation.

Image 1.1: The Utilitech Plug-in Touch Control Dimmer. This compact white unit plugs directly into a wall outlet and features a receptacle for the lamp's power cord.

2. Émbaran Kasalametan

• Pastikeun lamp control is used with incandescent bulbs only, up to a maximum of 200 watts. Do not exceed the specified wattage.
• Alat ieu dimaksudkeun kanggo dianggo di jero rohangan hungkul. Ulah kakeunaan kalembaban atanapi suhu anu ekstrim.
• Sok cabut colokan lamp from the control unit and the control unit from the wall outlet before performing any maintenance or changing bulbs.
• Entong nyobian ngabongkar atanapi ngarobih unit. Rujuk sadayana jasa ka tanaga anu mumpuni.
• Jauhkeun tina jangkauan barudak.
• Pastikeun lamp you intend to convert has a metal socket for proper touch functionality.

3. Eusi Paket

• 1 x Utilitech White Touch Lamp Unit kontrol

4. Setup jeung Instalasi

1. Nyiapkeun Lamp: Pastikeun l Anjeunamp has a metal socket. Unplug the lamp tina sumber kakuatanana.
2. Sambungkeun Unit Kontrol: Plug the Utilitech Touch Lamp Control unit into a standard 120V AC wall outlet.
3. Sambungkeun Lamp: Nyolok l Anjeunamp's power cord into the receptacle on the Utilitech Touch Lamp Unit kontrol.
4. Pariksa Jenis Bohlam: Pastikeun yén lamp contains an incandescent bulb, not exceeding 200 watts. LED or CFL bulbs may not function correctly or may cause damage.
5. Tés awal: Once connected, touch any metal part of the lamp's base or body. The lamp should turn on to its lowest setting.

Catetan penting: For optimal performance, ensure the lamp's metal components are clean and free of non-conductive coatings or paint where touch contact is intended.

5. Parentah Operasi

The Utilitech Touch Lamp Control provides three levels of brightness and an off state, cycled by touching the lamp's metal surface.

• To Turn On (Low Brightness): Touch any metal part of the lamp. Anu lamp will illuminate at its lowest brightness setting (night light).
• To Increase Brightness (Medium): Toél lamp again. The brightness will increase to a medium level.
• To Increase Brightness (High): Toél lamp a third time. The brightness will increase to its highest level (full brightness).
• Pareuman: Toél lamp a fourth time. The lamp bakal pareum.

The cycle repeats with each subsequent touch: Off → Low → Medium → High → Off.

6. Pangropéa

• beberesih: Disconnect the unit from the power outlet before cleaning. Wipe the control unit with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Ngagantian bohlam: Sok cabut colokan lamp from the control unit and the control unit from the wall outlet before replacing a light bulb. Ensure the replacement bulb is an incandescent type and does not exceed 200 watts.
• Panyimpenan: If storing the unit for an extended period, unplug it from the wall outlet and store it in a cool, dry place.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the official Utilitech website or contact their customer support line. Contact details are typically provided on the product packaging or within the original sales documentation.