FRYMASTER Computer Control Board User Manual

1. Produk Langkungview

The Frymaster Computer Control Board, model 106-1149SP, is a replacement component designed for commercial deep fryers. This board serves as the central interface for managing fryer operations, including temperature control, cooking cycles, and error monitoring. It features a digital display and a keypad for precise input and feedback.

Gambar 1.1: Hareupeun view of the Frymaster Computer Control Board 106-1149SP. The board features a central digital display, a keypad with numerical buttons (0-9), and function keys for temperature and power control. It is designed for integration into a fryer's control panel.

2. Émbaran Kasalametan

Before installation or operation, read and understand all safety warnings and instructions. Failure to do so may result in property damage, injury, or death.

• Bahaya listrik: Always disconnect power to the fryer before installing, servicing, or removing the control board. Only qualified technicians should perform electrical work.
• Pamasangan anu leres: Ensure the control board is installed correctly and securely according to the fryer manufacturer's specifications.
• Kompatibilitas komponén: Use only genuine Frymaster replacement parts or approved equivalents.
• Lingkungan Operasi: Do not expose the control board to excessive moisture, heat, or corrosive substances.

3. Setup jeung Instalasi

This section outlines the general steps for installing the control board. Refer to your specific fryer model's service manual for detailed instructions and wiring diagrams.

1. Pegatkeun daya: Turn off and unplug the fryer from its power source. Verify that all power is disconnected using a voltage méter.
2. Ngahapus Panel Aksés: Carefully remove the fryer's control panel or access cover to expose the existing control board.
3. Wiring Disconnection: Document or photograph all wiring connections to the old control board. Label wires if necessary. Disconnect all wires and connectors.
4. Old Board Removal: Cabut atanapi cabut papan kontrol anu lami tina kurung dipasangna.
5. Pamasangan Papan Anyar: Position the new Frymaster 106-1149SP control board in place and secure it with the appropriate screws or clips.
6. Sambungan Wiring: Reconnect all wires and connectors to the new board, ensuring they match the documented configuration. Double-check all connections for security.
7. Pamasangan ulang panel: Replace the fryer's control panel or access cover.
8. Sambungan deui kakuatan: Plug the fryer back into its power source.
9. Tés awal: Power on the fryer and perform an initial functional test as per the fryer's service manual.

4. Parentah Operasi

The control board provides an intuitive interface for managing fryer operations. Specific programming and operational sequences may vary slightly depending on the fryer model and installed software version.

4.1. Operasi dasar

• Hurungkeun/Pareuman: Use the designated power button (often indicated by a circle with a vertical line) to turn the fryer on or off.
• Setélan suhu: Press the temperature icon button (often a thermometer symbol) to enter temperature setting mode. Use the numerical keypad (0-9) to input the desired temperature. Press the checkmark or enter button to confirm.
• Cooking Cycles: The numerical buttons (1-9) may correspond to pre-programmed cooking cycles or product buttons. Press the desired button to initiate a cooking cycle.
• Left/Right Frypot Control: If applicable, the 'L' and 'R' buttons allow selection of the left or right frypot for independent control.
• Fungsi Timer: Some models may integrate a timer function. Use the appropriate button (often a clock symbol) to set and start a timer.

4.2. Advanced Programming (Refer to Fryer Manual)

For advanced functions such as programming custom cooking cycles, calibration, or diagnostic modes, consult the specific Frymaster fryer operator's manual. These functions typically involve specific key combinations or sequences not detailed here.

5. Pangropéa

Regular maintenance ensures the longevity and proper functioning of the control board.

• beberesih: Wipe the control board's surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or excessive water, as these can damage the electronics.
• Pamariksaan: Periodically inspect the board for any signs of physical damage, loose connections, or corrosion.
• Ventilasi: Ensure that the fryer's ventilation system is clear and functioning correctly to prevent overheating of internal components, including the control board.

6. Cara ngungkulan

This section provides solutions for common issues. For complex problems, contact a qualified service technician.

7. Spésifikasi

• model: 106-1149SP
• merek: Tukang goreng
• Tipe: Computer Control Board (Fryer)
• ASIN: B014TEKNEU
• Sadia munggaran: 2 Séptémber 2015
• Kasaluyuan: Designed for specific Frymaster commercial deep fryer models. Refer to your fryer's documentation for compatibility verification.

8. Garansi jeung Rojongan

This Frymaster component is typically covered by the manufacturer's standard warranty for replacement parts. Warranty terms and duration may vary. Please retain your proof of purchase.

For warranty claims, technical support, or service inquiries, please contact Frymaster customer service or an authorized Frymaster service provider. You may need to provide the model number (106-1149SP) and the serial number of your fryer.

Catetan: Unauthorized repairs or modifications may void the warranty and could lead to unsafe operating conditions.