1. Bubuka
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Legrand LEG97605 is a 300W dimmer switch designed for surface mounting, featuring a rotary button for light intensity control and an integrated push-button for ON/OFF functionality. It is suitable for 1-way circuit applications.
Gambar 1: Hareupeun view of the Legrand LEG97605 Dimmer Switch.
2. Émbaran Kasalametan penting
WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Improper installation can result in serious injury or death.
- Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni atanapi saluyu sareng kode listrik lokal.
- Ulah ngaleuwihan wat maksimumtage rating tina 300W.
- Pastikeun sadaya sambungan kabel aman sareng insulated leres.
- Alat ieu dirarancang pikeun pamakéan jero rohangan wungkul.
- Do not use with incompatible load types (e.g., certain LED drivers, fluorescent fixtures) unless specified by the manufacturer.
3. Eusi Paket
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch (1 unit)
- Mounting Screws (Quantity may vary)
- Pitunjuk Pitunjuk (Dokumén ieu)
Figure 2: Legrand LEG97605 Dimmer Switch as packaged.
4. Parentah instalasi
Turutan léngkah-léngkah ieu kalawan saksama pikeun masang saklar dimmer anjeun:
- Pareuman Daya: Locate the circuit breaker or fuse controlling the light fixture you intend to dim. Switch it to the OFF position. Verify power is off using a voltage tester saméméh lajengkeun.
- Nyiapkeun Lokasi Pasang: The LEG97605 is a non-flush, surface-mount dimmer. Choose a suitable wall location for mounting.
- Wiring:
- Identify the live (line) wire and the load wire (to the light fixture).
- Connect the incoming live wire to the terminal marked 'L' or 'Input' on the dimmer switch.
- Connect the wire going to the light fixture (load wire) to the terminal marked 'Load' or 'Output' on the dimmer switch.
- Ensure all connections are tight using the screw terminals.
- Pamasangan: Secure the dimmer switch to the wall surface using the provided mounting screws. Ensure it is firmly attached and level.
- Mulangkeun Daya: Sakali pamasangan parantos réngsé sareng sadaya sambunganna aman, hurungkeun deui kakuatan dina pemutus sirkuit.
Gambar 3: Top view of the dimmer switch, illustrating potential wiring points.
5. Operating Your Dimmer Switch
The Legrand LEG97605 dimmer switch features a rotary knob for dimming and an integrated push-button for ON/OFF control.
- To Turn ON/OFF: Press the rotary knob firmly. You will hear a click, and the light will turn on or off.
- To Dim/Brighten: Rotate the knob clockwise to increase light intensity and counter-clockwise to decrease light intensity.
Gambar 4: Angled view highlighting the rotary control knob.
6. Pangropéa
Your Legrand dimmer switch requires minimal maintenance.
- beberesih: To clean the surface of the dimmer, wipe with a soft, damp lawon. Ulah make cleaners abrasive, pangleyur, atawa bahan kimia kasar, sabab ieu bisa ngaruksak finish.
- Pamariksaan: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
7. Cara ngungkulan
If you experience issues with your dimmer switch, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu henteu hurung. | Teu aya daya kana saklar; kabelna salah. | Check circuit breaker/fuse. Verify wiring connections are correct and secure. |
| Light does not dim or dims poorly. | Incompatible bulb type; minimum load not met. | Ensure all connected bulbs are dimmable. Check if the total wattage of bulbs meets the dimmer's minimum load requirement (if any). |
| Lampu kedip-kedip atanapi buzzes. | Loose wiring connection; incompatible bulb type; electrical interference. | Turn off power and check all wire connections. Replace bulbs with high-quality dimmable types. Consult an electrician if problem persists. |
| Dimmer feels hot to the touch. | Overload or improper wiring. | Turn off power immediately. Verify total connected wattage does not exceed 300W. Consult a qualified electrician. |
If the problem persists after attempting these solutions, contact Legrand customer support or a qualified electrician.
8. Spésifikasi Téknis
| Fitur | Rincian |
|---|---|
| merek | Legrand |
| Nomer modél | LEG97605 |
| Modeu Operasi | HIRUP |
| Peunteun ayeuna | 10 Amps |
| Wattage | 300 Watt |
| Tipe Kontak | Biasana Buka |
| Tipe Panyambung | Screws |
| Terminal | sekrup |
| Jinis Sirkuit | 1-jalan |
| Tipe Aktuator | Rotary |
| Tipe Controller | Pencét Tombol |
| Bahan Kontak | Tambaga |
| Peunteun Protection Internasional | IP54 |
| Tipe Pamasangan | Permukaan Gunung |
| Warna | Bodas |
| Item Beurat | 2.46 ons |
| Tanggal Kahiji Sadia | 25 Séptémber 2015 |
9. Garansi sarta Rojongan Palanggan
For warranty information, technical assistance, or to report a problem, please contact Legrand customer support. Refer to the official Legrand websitus atawa bungkusan produk pikeun detil kontak panganyarna.
Resmi Legrand Websitus: www.legrand.us
