Jebao XTP-10000 Submersible Pond Pump User Manual

1. Bubuka

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Jebao XTP-10000 Submersible Pond Pump. Please read these instructions carefully before use and retain them for future reference. This pump is designed for use in ponds and water features, capable of handling dirty water and functioning as both a filter and watercourse pump.

2. Parentah Kasalametan

Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan:

• Pastikeun catu daya cocog sareng vol pompatage (240V AC).
• Do not operate the pump if the cable or housing is damaged.
• Always disconnect the pump from the power supply before performing any maintenance, cleaning, or installation.
• Do not lift or carry the pump by its power cable.
• The pump is designed for submersible use only. Do not run dry.
• Keep children and animals away from the pond area during pump operation and maintenance.
• Installation should comply with local electrical regulations. A residual current device (RCD) with a tripping current not exceeding 30mA is recommended.

3. Produk Langkungview jeung Fitur

The Jebao XTP-10000 pump is an energy-efficient submersible pump designed for continuous operation in pond environments. Key features include:

• Efisiensi Tinggi: 10,000 liters per hour (L/hr) flow rate with only 68 watts power consumption.
• Pamakéan serbaguna: Suitable for filter systems and watercourse applications.
• Kepala maksimum: Capable of pumping water up to 4.5 meters.
• Desain kompak: Dimensions of 306mm x 265mm x 127mm.
• Sambungan selang: Fitur 4-stage rotatable stepped outlet for hose sizes 20mm, 25mm, 32mm, and 40mm.
• Perlindungan Motor: Equipped with a thermal resettable fuse that automatically switches off the pump if it overheats, preventing motor damage.

Figure 1: The Jebao XTP-10000 pump unit, showcasing desain anu kompak sareng pelindung c naasing.

4. Setup jeung Instalasi

Turutan léngkah ieu pikeun instalasi anu leres:

1. Ngabongkar bungkusan: Carefully remove the pump from its packaging. Inspect for any signs of damage.
2. Sambungan selang:
   • Identify the appropriate hose size (20mm, 25mm, 32mm, or 40mm) for your application.
   • Trim the stepped outlet connector to the desired diameter.
   • Securely attach your pond hose to the trimmed outlet using a hose clamp (not included) to prevent leaks. The outlet can be rotated for optimal hose routing.
3. panempatan:
   • Place the pump on a stable, level surface at the bottom of your pond or water feature.
   • Ensure the pump is fully submerged in water. The pump is designed to handle dirty water, but avoid placing it directly in thick sludge to prevent premature clogging.
4. Sambungan listrik:
   • The pump comes with a 10-meter cable but without a plug. A qualified electrician must connect the cable to a suitable outdoor, weather-protected power supply, incorporating an RCD.
   • Ensure the cable is routed safely to prevent tripping hazards or damage.

Figure 2: Dimensional drawing of the Jebao XTP-10000 pump, showing its length (306mm), width (265mm), and height (127mm).

5. Parentah Operasi

Once installed and connected to the power supply:

• Mimitian ngamimitian: Plug in the pump or switch on the power supply. The pump should start immediately, circulating water.
• Penyesuaian Aliran: The flow rate is fixed at 10,000 L/hr. If reduced flow is desired, it must be achieved through external valves or flow restrictors in your plumbing system. Note that some external controllers may not be compatible and could cause erratic operation.
• Perlindungan termal: The pump is equipped with a thermal resettable fuse. If the pump overheats (e.g., due to low water level, blockage, or prolonged dry running), it will automatically shut off. Allow the pump to cool down and address the cause of overheating before restarting. The pump will automatically reset once cooled.

Figure 3: Performance curve graph illustrating the relationship between pump head (M) and flow rate (L/H) for various XTP series models. The XTP-10000 (purple line) shows a maximum head of 4.5m at 0 L/H and a maximum flow of 10,000 L/H at 0m head.

6. Pangropéa

Regular maintenance ensures optimal performance and longevity of your pump:

• Ngabersihan Casing: Periodically remove the pump from the pond and clean the outer casing to remove accumulated debris, leaves, and algae. This helps maintain efficient water intake.
• Impeller beberesih:
  • Disconnect power before attempting to open the pump.
  • Pompa casing can be opened by pressing two small buttons (refer to product diagram if available, or consult manufacturer for specific opening instructions).
  • Carefully remove the impeller and clean any debris, calcium buildup, or blanket weed from the impeller and its housing. A soft brush and clean water are usually sufficient.
  • Reassemble the pump, ensuring all parts are correctly seated and the casing ditutup pageuh.
• Panyimpenan usum salju: In freezing conditions, remove the pump from the pond, clean it thoroughly, and store it in a frost-free location, fully submerged in water or kept moist to prevent seals from drying out.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims. Jebao is committed to providing reliable products and customer assistance.

For further assistance, please visit the official Jebao websitus atanapi ngahubungan departemén layanan palanggan maranéhna.