Tecnolite LED-12V-360W-PR 360W Power Supply Driver User Manual

1. Bubuka

This manual provides detailed instructions for the safe and efficient use of the Tecnolite LED-12V-360W-PR 360W Power Supply Driver. This device is designed for project applications, converting AC input voltage to a stable 12V DC output for LED lighting systems and other compatible devices. Please read this manual thoroughly before installation and operation.

Gambar 1: Tecnolite LED-12V-360W-PR 360W Power Supply Driver. This image shows the aluminum casing, ventilation slots, input/output terminals, and voltage switch pilihan.

2. Émbaran Kasalametan

Salawasna merhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan kana alat:

• PERHATOSAN! TINGGI VOLTAGE DI DALAM. Do not remove this cover. Only qualified service personnel should perform maintenance or repairs.
• Pastikeun input voltage switch (115V/230V) is correctly set before connecting to the power source to avoid damaging the unit.
• Pegatkeun sambungan listrik sateuacan nyieun sambungan atanapi panyesuaian naon waé.
• Install the driver in a well-ventilated area to prevent overheating.
• Ulah ngalaan unit ka Uap atawa suhu ekstrim.
• Ensure proper grounding (indicated by the # symbol on the terminal block).
• Ulah ngaleuwihan kapasitas beban maksimum 360W.

3. Fitur Produk

• Designed for project applications.
• Lebar input voltagrentang e: 100-277 VAC.
• Kaluaran stabil voltage: 12 VDC.
• High power output: 360 W maximum load.
• Aluminium awét casing for heat dissipation and protection.
• Integrated drivers for efficient power conversion.

4. Setup jeung Instalasi

1. Ngabongkar bungkusan: Cabut catu daya tina bungkusna kalayan ati-ati teras parios naha aya karusakan fisik.
2. Pamasangan: Mount the driver securely in a location that allows for adequate ventilation. Ensure no obstructions block the ventilation slots.
3. Masukan Voltage Pilihan: Milarian voltage selection switch on the side of the unit. Set it to either 115V or 230V according to your local mains voltage. Incorrect selection can damage the unit.
4. Input Kabel (AC): Connect the AC input wires to the terminal block labeled 'L' (Live), 'N' (Neutral), and '#' (Ground). Ensure all connections are tight and secure.
5. Kaluaran Kabel (DC): Connect your 12V DC load (e.g., LED strips, modules) to the output terminals labeled '+V' and '-V'. Observe correct polarity (+ to + and - to -).
6. Cék ahir: Double-check all connections and the input voltage selection before applying power.

5. Parentah Operasi

Once the power supply is correctly installed and wired, you can apply power. The unit will convert the AC input to a stable 12V DC output. The output voltage can be finely adjusted using the '+V ADJ' potentiometer if necessary, though it is typically pre-calibrated.

• Ensure the total power consumption of connected devices does not exceed 360W.
• Monitor the unit for any unusual noises or excessive heat during initial operation.

6. Pangropéa

The Tecnolite LED-12V-360W-PR driver requires minimal maintenance. Follow these guidelines to ensure longevity:

• Jaga unit tetep bersih sareng bébas tina lebu sareng kokotor. Anggo lawon anu lemes sareng garing pikeun ngabersihkeun.
• Periodically check ventilation openings to ensure they are not blocked.
• Inspect wiring connections for tightness and signs of wear or corrosion.
• Ulah nyobian muka casing, sabab ngandung volume anu luhurtagkomponén e sareng ngan kedah diservis ku tanaga anu mumpuni.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information or technical support, please contact Tecnolite customer service or visit the official Tecnolite brand store.

Tecnolite Brand Store: Tecnolite on Amazon.com.mx