Manual Pangguna Relay Pulsa Éléktromékanis Séri Finder 27 Tipe 270182300000

1. Bubuka

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Finder Series 27 Type 270182300000 Electromechanical Pulse Relay. Please read this manual thoroughly before using the product and retain it for future reference.

The Finder Series 27 pulse relay is a 10 A, unipolar switch with 1 normally open (NO) contact, designed for AC 50/60 Hz systems at 230 V. It features a standard design with socket clamps for connection and is suitable for panel mounting.

2. Émbaran Kasalametan

PERHATOSAN: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.

• Salawasna pegatkeun daya sateuacan masang, ngalayanan, atanapi nyabut relay.
• Pastikeun grounding ditangtoskeun pikeun nyegah shock listrik.
• Pariksa yén suplai voltage and current ratings match the relay's specifications.
• Ulah ngoperasikeun relay dina lingkungan anu ngaleuwihan wates suhu atanapi kalembaban anu ditangtukeun.
• Avoid exposing the relay to moisture or corrosive substances.

3. Produk Langkungview

The Finder Series 27 Electromechanical Pulse Relay is designed for applications requiring sequential switching, such as lighting control. Key features include:

• Panel Gunung: Designed for secure installation within electrical panels.
• AC Coils: Operates with alternating current.
• 1 NO Contact: Features one normally open contact for switching circuits.
• 3 Sequences Available: Supports various operational sequences.
• Kapasitas Daya Tinggi: Dipeunteun pikeun 10 Amps and 2400 Watts at 230 Volts.

Gambar 3.1: Hareupeun view of the Finder Series 27 Electromechanical Pulse Relay, showing its transparent casing sareng sambungan terminal.

4. Setup jeung Instalasi

This pulse relay is designed for panel mounting. Follow these steps for proper installation:

1. Pegatkeun daya: Ensure all power to the installation area is disconnected at the main circuit breaker before beginning any work.
2. Pamasangan: Securely mount the relay within an electrical panel using appropriate fasteners. The relay dimensions are approximately 1.26 x 2.17 x 2.76 inches.
3. Sambungan Wiring:
   • Identify the three terminals on the relay.
   • Connect the control circuit wires to the coil terminals (A1, A2) as indicated on the relay. The coil voltage is 230 Volts AC.
   • Connect the load circuit wires to the contact terminals (1 NO) using the clamp-type connectors. The relay is rated for 10 Amps.
   • Pastikeun sadaya sambungan kedap tur aman pikeun nyegah kontak leupas sarta overheating.
4. Verifikasi: Double-check all wiring against the electrical diagram for your specific application.
5. Pamulihan kakuatan: Sakali pamasangan parantos réngsé sareng diverifikasi, balikkeun kakuatan ka sirkuit.

Gambar 4.1: Diwincik view of the Finder Series 27 Relay's screw terminals, illustrating connection points for wiring.

5. Parentah Operasi

The Finder Series 27 pulse relay operates automatically based on the control signals it receives. It is commonly used in applications where a momentary input signal triggers a change in the output state, which then remains until the next momentary input.

• When a pulse is applied to the coil terminals (A1, A2), the internal mechanism latches, changing the state of the 1 NO contact.
• The contact remains in this new state even after the control pulse is removed.
• A subsequent pulse will revert the contact to its original state.
• The relay supports three distinct operational sequences, which are determined by the specific model variant and internal configuration. Refer to your system's wiring diagram for the exact sequence implemented.

Gambar 5.1: Example of the Finder Series 27 Relay integrated into a kitchen lighting system, demonstrating its application in controlling light fixtures.

Gambar 5.2: The Finder Series 27 Relay shown in a living room setting, illustrating its use for managing multiple light sources.

6. Pangropéa

The Finder Series 27 pulse relay is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended:

• Inspeksi Visual: Pariksa relay sacara berkala pikeun ningali tanda-tanda karusakan fisik, perubahan warna, atanapi sambungan anu kendur.
• beberesih: Upami diperyogikeun, bersihan bagian luar relay sacara saksama nganggo lawon anu garing sareng lemes. Entong nganggo pangleyur atanapi pembersih anu abrasif.
• Pariksa sambungan: Ensure all wiring connections remain tight and secure.
• Kaayaan Lingkungan: Pastikeun yén lingkungan operasi tetep dina kisaran suhu sareng kalembaban anu ditangtukeun.

Catetan: The relay is a sealed unit and is not user-serviceable internally. Do not attempt to open the casing.

7. Cara ngungkulan

If the Finder Series 27 pulse relay is not functioning as expected, consider the following troubleshooting steps:

• No Response to Control Signal:
  • Check if power is supplied to the control circuit and the relay coil (A1, A2).
  • Verify that the control signal voltage cocog jeung voltase koil relaytage (230V AC).
  • Inspect control circuit wiring for breaks or loose connections.
• Load Not Switching:
  • Ensure the relay is receiving control pulses and its internal mechanism is audibly clicking or visibly changing state (if applicable).
  • Check the load circuit wiring for continuity and secure connections.
  • Verify that the load current does not exceed the relay's 10 Amp meunteun.
  • Confirm that the load itself is functional.
• Relay Overheating:
  • Ensure the load current does not exceed the relay's maximum rating.
  • Check for proper ventilation around the relay within the panel.
  • Verify that the ambient temperature is within the specified operating range.

If issues persist after performing these checks, contact a qualified electrician or Finder technical support.

8. Spésifikasi

9. Garansi jeung Rojongan

For information regarding warranty coverage, technical support, or service, please contact Finder directly through their official websitus atanapi distributor resmi. Simpen resi pameseran anjeun salaku bukti pameseran.

Pabrikan: PEMILIK

Nomer Bagian: 27.01.8.230.0000