Bubuka
Hatur nuhun pikeun meuliasing the STATUS High Power 13 LED Lantern. This manual provides important information regarding the safe operation, maintenance, and specifications of your new lantern. Please read this manual thoroughly before use and retain it for future reference.
Émbaran Kasalametan
Always observe the following safety precautions to prevent injury or damage to the lantern:
- Do not look directly into the LED light source when the lantern is on, as this may cause eye damage.
- Keep the lantern away from water and moisture. This product is not waterproof.
- Do not attempt to disassemble or modify the lantern. Repairs should only be performed by qualified personnel.
- Ensure batteries are inserted with correct polarity (+/-). Incorrect insertion can cause damage or leakage.
- Remove batteries if the lantern will not be used for an extended period to prevent leakage and corrosion.
- Jauhkeun tina jangkauan barudak.
Eusi pakét
Pastikeun yén sadaya item aya dina bungkusan:
- 1 x STATUS High Power 13 LED Lantern
- 4 x D Batteries (included)
Disetél
Pamasangan batré
The STATUS High Power 13 LED Lantern requires 4 x D batteries for operation. These batteries are included with your purchase.
- Locate the battery compartment cover, typically at the base or rear of the lantern.
- Twist or unlatch the cover to open the compartment.
- Insert the 4 D batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
- If a battery saving plastic tag is present, remove it before inserting batteries.
- Tutup panutup kompartemen batréna.
Gambar 1: Hareupeun view of the STATUS High Power 13 LED Lantern, illustrating its design and the array of 13 LED bulbs.
Parentah Operasi
Hurungkeun/Pareuman
The lantern is equipped with a simple on/off switch.
- Pikeun muterkeun lentera ON, slide the switch to the 'ON' position. The 13 LEDs will illuminate.
- Pikeun muterkeun lentera Pareum, slide the switch to the 'OFF' position. The LEDs will turn off.
Pangropéa
beberesih
To clean the lantern, wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the lantern in water.
Ngagantian batré
When the light output diminishes, it is time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section to replace the 4 x D batteries.
Catetan: Miceun batré anu parantos dianggo kalayan tanggung jawab numutkeun peraturan lokal.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lantera teu hurung. | Batré pareum atawa salah dipasang. Plastic battery saving tag teu dipiceun. | Check battery polarity and ensure they are fresh. Remove any plastic battery saving tags. |
| Cahya taram. | Batré lemah. | Replace all 4 D batteries with new ones. |
| Intermittent light. | Loose battery connection or faulty switch. | Ensure batteries are seated firmly. If problem persists, contact customer support. |
spésifikasi
| merek | Status |
| Nomer modél | SLEDREDLANT1PKB2 |
| Tipe Sumber Cahaya | LED |
| Jumlah Lampu | 13 |
| Sumber Daya | Batré Powered |
| Jenis Batré | 4 x D Batré |
| Voltage | 6 volt |
| Bahan | palastik |
| Warna | Beureum |
| Dimensi produk | 16 x 10.01 x 10.01 cm |
| Item Beurat | 500 g |
| Klasifikasi Cahaya Wewengkon | IP00 |
Garansi sareng Rojongan
For product support or warranty inquiries, please contact the manufacturer:
Status Internasional (UK) Ltd
Unit 1, Whitehall 26 Business Park
Heathfield Lane, Birkenshaw
Bradford, BD11 2HW
karajaan Inggris
Punten tahan bukti pameseran anjeun pikeun klaim garansi.
