DYNAUDIO Emit M10 Bookshelf Speaker Instruction Manual

Bubuka

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Émbaran Kasalametan penting

• Read these instructions thoroughly before operating the product.
• Tetep parentah ieu pikeun rujukan hareup.
• Heed sagala warnings on produk jeung dina parentah operasi.
• Turutan sagala parentah.
• Entong nganggo alat ieu caket cai.
• Ngabersihan ngan ku kaén garing.
• Ulah meungpeuk sagala bukaan ventilasi. Pasang saluyu sareng parentah produsén.
• Entong dipasang di deukeut sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
• Ngan anggo kantétan/aksésori anu ditunjuk ku produsén.
• Rujuk sadayana jasa ka tanaga jasa anu mumpuni. Diperlukeun ngalayanan nalika aparatur ruksak ku cara naon waé, sapertos kabel catu daya atanapi colokan rusak, cairan tumpah atanapi barang murag kana aparatur, aparatur parantos kakeunaan hujan atanapi lembab, henteu beroperasi normal. , atawa geus turun.

Eusi pakét

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Manual Pitunjuk (dokumén ieu)

Upami aya barang anu leungit atanapi ruksak, mangga langsung ngahubungi padagang anjeun.

Disetél

Panempatan Speaker

Panempatan spiker anu leres penting pisan pikeun kualitas sora anu optimal. Pertimbangkeun pedoman ieu:

• Jarak ti Tembok: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Jangkungna: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Segitiga Stereo: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Jempol dina: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage focus.

Gambar: Hareupeun view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Gambar: Hareupeun view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Nyambung ka hiji Amppangagung

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Pareum listrik: Pastikeun Anjeun ampLampu dipareuman sareng dicabut tina stop kontak sateuacan ngadamel sambungan naon waé.
2. Kabel Speaker: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Polaritasna: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Sambungan Aman: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Gambar: Tukangeun view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Ngoperasikeun Speaker anjeun

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Daya Hurung: Colokkeun sareng hurungkeun anjeun amppangagung.
• Kontrol volume: Mimitian ku amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Periode istirahat: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Grills: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Pangropéa

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• beberesih: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Grills: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Hindarkeun sinar panonpoé langsung sareng panas: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Uap: Keep the speakers away from excessive moisture or humidity.
• Perlindungan supir: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

Pamérésan masalah

Upami anjeun mendakan masalah sareng speaker anjeun, tingal masalah sareng solusi umum ieu:

• Henteu aya sora:
  • Pastikeun ampliifier dihurungkeun sareng disambungkeun kalayan leres.
  • Pariksa sadaya sambungan kabel spiker boh dina amplifier and the speakers for secure contact and correct polarity.
  • Verify the correct input source is selected on your amppangagung.
  • Confirm the volume is turned up on the amppangagung.
• Sora distort:
  • Ngurangan tingkat volume on Anjeun ampliifier. Ngageterkeun speaker kaleuleuwihi tiasa nyababkeun distorsi.
  • Pariksa sambungan kabel speaker naha aya untaian anu leupas atanapi korsleting.
  • Pastikeun amplifier's power output is suitable for the speakers (refer to specifications).
  • Pariksa sumber audio pikeun distorsi.
• Bass lemah:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Uneven Soundstage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

spésifikasi

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garansi sareng Rojongan

Émbaran jaminan

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTY. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan normal. Punten tahan bukti pameseran anjeun pikeun klaim garansi.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO websitus.

Rojongan Palanggan

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support websitus pikeun bantuan salajengna.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.