TUC-60-HC ASLI

Manual Instruksi Kulkas Undercounter Dua Bagian True TUC-60-HC 60 inci

Modél: TUC-60-HC

1. Émbaran Kasalametan

Please read all instructions carefully before operating the appliance to ensure safe and efficient use. Retain this manual for future reference.

  • Kasalametan listrik: Pastikeun unit disambungkeun ka outlet listrik grounded leres kalayan vol benertage as specified on the product label. Do not use extension cords.
  • Ventilasi: Maintain adequate clearance around the unit for proper ventilation. Blocked vents can lead to overheating and reduced efficiency.
  • Alat beurat: This appliance is heavy. Use appropriate lifting techniques and equipment when moving to prevent injury.
  • beberesih: Pegatkeun sambungan kakuatan saméméh meresihan atawa ngalakukeun sagala pangropéa. Paké cleaners non-abrasive.
  • Bahan anu gampang kaduruk: Ulah nyimpen bahan ngabeledug atawa bahan kaduruk di jero atawa deukeut kulkas.

2. Produk Langkungview

The True TUC-60-HC is a 60-inch two-section undercounter refrigerator designed for commercial use, featuring solid stainless steel doors and a robust construction for durability and performance.

True TUC-60-HC 60-inch two-section undercounter refrigerator with solid stainless steel doors.

Hareupeun view of the True TUC-60-HC undercounter refrigerator, showcasing its stainless steel finish and two solid doors.

Fitur konci:

  • 60-inch width, two-section design
  • Solid stainless steel doors
  • 15.5 Cubic Feet capacity
  • Sistim defrost otomatis
  • Undercounter installation type
  • konstruksi stainless steel awét
Dimensions of the True TUC-60-HC undercounter refrigerator.

Diagram showing the dimensions of the True TUC-60-HC refrigerator: 60.38 inches width, 30.13 inches depth, and 29.75 inches height.

3. Setélan

3.1 Ngabongkar bungkusan

  1. Taliti miceun sadaya bahan bungkusan, kalebet pita sareng film pelindung.
  2. Pariksa unitna pikeun milarian karusakan pengiriman. Laporkeun karusakan naon waé ka operator langsung.
  3. Remove any internal packing materials and accessories.

3.2 Nempatkeun

  • Place the refrigerator on a strong, level surface capable of supporting its weight when fully loaded.
  • Ensure adequate air circulation around the unit. Do not block the condenser air intake or exhaust vents.
  • Avoid direct sunlight or proximity to heat-generating appliances (ovens, stoves) to maintain optimal performance.

3.3 Sambungan Listrik

  • Before plugging in, ensure the power supply matches the voltage jeung amperage requirements listed on the unit's serial tag.
  • Plug the unit directly into a dedicated, grounded electrical outlet. Do not use adapter plugs or extension cords.

3.4 beberesih Awal

  • Before first use, clean the interior and exterior surfaces with a mild soap and water solution.
  • Usap garing ku kaén anu lembut.

4. Parentah Operasi

4.1 Ngahurungkeun sareng Kontrol Suhu

  1. After setup, plug in the unit. The compressor will start automatically.
  2. Allow the refrigerator to run for several hours (typically 2-4 hours) to reach its set temperature before loading products.
  3. Temperature settings are typically adjusted via a digital controller located on the front or interior of the unit. Refer to the specific controller's instructions for detailed adjustment procedures.

4.2 Ngamuat Kulkas

  • Distribute items evenly on the shelves to ensure proper air circulation.
  • Do not overload shelves beyond their weight capacity.
  • Avoid blocking the internal air vents to maintain consistent temperatures.

4.3 Operasi Panto

  • Ensure doors close completely after each use to maintain internal temperature and energy efficiency.
  • Check door gaskets regularly for wear or damage that could compromise the seal.

5. Pangropéa

5.1 Ngabersihan Biasa

  • Interior: Clean the interior weekly with a mild, non-abrasive cleaner and warm water. Rinse thoroughly and dry.
  • Luar: Wipe down stainless steel surfaces regularly with a soft cloth and a stainless steel cleaner to maintain appearance.
  • Kumparan Kondensor: The condenser coil should be cleaned monthly or quarterly, depending on the operating environment. Disconnect power, locate the coil (usually at the rear or bottom), and use a brush or vacuum cleaner to remove dust and debris. A dirty coil reduces efficiency and can lead to compressor failure.

5.2 Inspeksi Gasket

  • Inspect door gaskets monthly for cracks, tears, or stiffness. Damaged gaskets can lead to air leaks and increased energy consumption.
  • Clean gaskets with warm, soapy water to keep them pliable and ensure a good seal.

5.3 Defrost otomatis

This unit features an automatic defrost system, eliminating the need for manual defrosting. Ensure the drain pan is clear and the drain line is not obstructed to allow proper water evaporation.

6. Cara ngungkulan

Sateuacan ngahubungan jasa, ulangview masalah umum sareng solusi ieu:

MasalahMungkin Cukang lantarananaSolusi
Unit teu coolingNo power; thermostat set too high; dirty condenser coil; door left openCheck power supply; adjust thermostat; clean condenser coil; ensure door is closed
Sora kaleuleuwihiUnit not level; loose components; fan obstructionLevel the unit; check for loose parts; clear fan obstruction
Cai dina lantaiClogged drain line; drain pan overflowClear drain line; ensure drain pan is correctly positioned

7. Spésifikasi

FiturRincian
merekBENER
Nomer modélTUC-60-HC
Dimensi produk30.13 "D x 60.38" W x 29.75" H
Kapasitas15.5 suku kubik
Tipe PamasanganUndercounter
Faktor BentukUndercounter
Fitur hususKompak
WarnaBeusi sténless
Sistem DefrostOtomatis
Tipe Bahan PantoBeusi sténless
Jumlah Rak5
Jumlah Panto2
SertifikasiNEMA

8. Garansi jeung Rojongan

For warranty information or technical support, please refer to the warranty card included with your product or visit the official TRUE websitus. Rincian kontak pikeun layanan palanggan biasana sayogi dina halaman produsén websitus.

Dokumén Patali - TUC-60-HC

Praview Manual Instalasi Manufaktur Leres & Guide Mimitian Gancang pikeun Modél Umum
Manual pamasangan ieu sareng pituduh mimiti gancang ti True Manufacturing Co., Inc. nyayogikeun inpormasi penting pikeun pamasangan, operasi, sareng pangropéa anu aman sareng efektif tina alat-alat kulkas modél umumna. Éta nyertakeun peringatan kaamanan, spésifikasi, prosedur pamasangan, sareng saran pangropéa.
Praview Leres Refrigerated Dahareun Prep Instalasi Manual
Pamasangan komprehensif, operasi, jeung pangropéa manual pikeun True Refrigerated Food Prep parabot, ngawengku kaamanan, setelan, jeung prosedur ngalayanan.
Praview BENER Refrigeration Appliance Instalasi jeung Setup Guide
Pitunjuk komprehensif pikeun alat-alat kulkas BENER anu nyertakeun syarat pamasangan, pangaturan listrik, uncrating, leveling, rak, sareng nutup kana lantai. Ngawengku spésifikasi jeung warnings kaamanan.
Praview Kulkas Panto Ayun Kaca True SPEC SERIES® Roll-In | Modél STR, STA, STG
Rinci leuwihview tina Kulkas True SPEC SERIES® Roll-In Glass Swing Door, kalebet fitur, spésifikasi, sareng variasi modél (STR1RRI-1G-HC, STA1RRI-1G-HC, STG1RRI-1G-HC) pikeun aplikasi jasa pangan komérsial.
Praview Lambaran Spesifikasi Kulkas True GDM-05PT-S-HC~FGD01 Merchandiser Panto Kaca
Jelajah spésifikasi sareng fitur Kulkas Merchandiser Panto Kaca True GDM-05PT-S-HC~FGD01. Unit ieu nawiskeun pendinginan hidrokarbon R290 anu efisien, konstruksi baja tahan karat, lampu LED, sareng desain pass-thru pikeun aplikasi jasa katuangan komérsial.
Praview Manual Pamasangan sareng Operasi Kulkas/Freezer Komersial True T-23DF-HC
Pituduh pamasangan, operasi, pangropéa, sareng kaamanan anu lengkep pikeun kulkas/freezer komérsial dual-chamber True T-23DF-HC. Ngawengku ngungkulan masalah, pitunjuk beberesih, sareng inpormasi garansi.