Electrolux EL8802A

Electrolux Precision Brushroll Clean Upright Vacuum

Model: EL8802A

Parentah Kasalametan penting

Nalika nganggo alat listrik, pancegahan dasar kedah diturutan, kalebet ieu:

Produk Leuwihview

The Electrolux Precision Brushroll Clean Upright Vacuum EL8802A is designed for effective cleaning across various floor types. It features a multi-cyclonic system for consistent suction and Brushroll Clean Technology to simplify brushroll maintenance.

Electrolux Precision Upright Vacuum EL8802A, full view

Gambar 1: Pinuh view of the Electrolux Precision Upright Vacuum EL8802A, showcasing its design and main components.

Fitur konci:

Majelis

Your Electrolux Precision Upright Vacuum comes partially assembled. Follow these steps to complete the assembly:

  1. Pasang gagang: Insert the handle assembly into the main vacuum body until it clicks securely into place. Ensure the handle is firmly seated.
  2. Sambungkeun selang: Attach the deluxe stretch hose to the hose inlet port on the main body. Twist or push until it locks.
  3. Asesoris Toko: Place the 3-in-1 Versa Tool and any other included accessories into their designated storage slots on the vacuum.

Ensure all connections are secure before operating the vacuum cleaner.

Parentah Operasi

Ngahurungkeun sareng mareuman

Adjusting Floor Type Settings

The vacuum features adjustable height settings for optimal cleaning on different surfaces.

Electrolux Precision Upright Vacuum transitioning from hard floor to carpet

Gambar 2: The vacuum head positioned on a transition between a hard floor and carpet, illustrating its versatility.

Using the Quick-Release Wand and Attachments

The quick-release wand and deluxe stretch hose allow for extended reach cleaning.

Woman using Electrolux vacuum hose and wand to clean stairs

Gambar 3: A user cleaning stairs with the vacuum's hose and wand attachment, demonstrating its extended reach capability.

  1. Press the quick-release button on the handle to detach the wand.
  2. Attach the desired 3-in-1 Versa Tool or other accessory to the end of the wand or directly to the hose.
  3. Use the tool to clean upholstery, crevices, corners, or stairs.
  4. When finished, remove the attachment and reinsert the wand into the vacuum body until it clicks.

Pangropéa

Ngosongkeun Piala Lebu

Empty the dust cup after each use or when the "Full" indicator is visible to maintain optimal suction.

  1. Pastikeun vakum geus unplugged.
  2. Press the dust cup release button and lift the dust cup away from the vacuum body.
  3. Position the dust cup over a trash receptacle.
  4. Press the bottom release latch to open the dust cup and empty its contents.
  5. Close the dust cup bottom securely and reattach the dust cup to the vacuum until it clicks.

Brushroll Clean Technology

The exclusive Brushroll Clean Technology removes tangled hair from the brushroll automatically.

Foot pressing the Brushroll Clean pedal on Electrolux vacuum

Gambar 4: A foot activating the Brushroll Clean pedal, demonstrating the ease of maintaining the brushroll.

  1. Ensure the vacuum is plugged in and powered ON.
  2. With the vacuum in the upright position, gently press the Brushroll Clean pedal (usually located near the brushroll housing) with your foot.
  3. Hold the pedal down for approximately 5-10 seconds. The brushroll will engage a cleaning mechanism.
  4. Release the pedal. Tangled hair should now be cut and deposited into the dust cup.

Catetan: For stubborn tangles, manual cleaning may still be required. Always unplug the vacuum before manual brushroll inspection or cleaning.

Handapeun view of Electrolux vacuum brushrolls

Gambar 5: Hiji underside view of the vacuum head, showing the brushrolls and their housing, important for maintenance.

Saringan beberesih

Regularly clean the filters to maintain suction performance and air quality. The vacuum uses a washable HEPA filter.

  1. Pastikeun vakum geus unplugged.
  2. Remove the dust cup. The primary filter (often a cyclonic cone filter) is usually located inside or directly below the dust cup.
  3. Remove the HEPA filter, typically located in a separate compartment, often at the back or side of the vacuum. Refer to your specific model's diagram for exact location.
  4. Tap loose dirt from filters over a trash can.
  5. Rinse washable filters under cool running water until the water runs clear. Do not use detergent.
  6. Allow filters to air dry completely for at least 24 hours before reinserting. Do not use a dryer or other heating methods.
  7. Reinstall all filters and the dust cup.

Pamérésan masalah

MasalahMungkin Cukang lantarananaSolusi
Vakum moal hurung.Teu dicolokkeun; pemutus sirkuit pareum; saklar listrik pareum.Check plug; reset circuit breaker; ensure power switch is ON.
Kaleungitan nyeuseup.Dust cup full; filters clogged; hose or nozzle clogged; brushroll jammed.Empty dust cup; clean/replace filters; check and clear hose/nozzle for blockages; clear brushroll.
Brushroll teu spinning.Brushroll jammed with debris; belt broken; floor setting incorrect.Unplug and clear brushroll; check belt (contact service if broken); adjust floor setting to carpet mode.
Sora teu biasa.Blockage in hose/nozzle; foreign object in brushroll; motor issue.Check and clear blockages; unplug and remove foreign objects from brushroll; if noise persists, contact customer support.

spésifikasi

Garansi sareng Rojongan

For warranty information, product registration, or technical support, please refer to the warranty card included with your purchase or visit the official Electrolux websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Dukungan Online: www.electrolux.com/support

Palayanan palanggan: Refer to your regional Electrolux contact information for phone support.