KUS Digital GPS Speedometer Gauge User Manual

1. Produk Langkungview

The KUS Digital GPS Speedometer Gauge is a high-precision instrument designed for marine applications, including boats and yachts. It provides accurate speed readings, mileage accumulation, and direction/compass information directly from satellite signals. This gauge is built for durability with a waterproof design and an anti-fogging function, ensuring reliable performance in various conditions.

Key features include a wide indicating range of 0-999 knots (with options for km/h and mph), 12V/24V working voltage compatibility, and selectable red or yellow backlight for enhanced visibility.

Gambar 1: Hareupeun view of the KUS Digital GPS Speedometer Gauge, displaying speed in knots and mileage/course information. The gauge features a clear digital display and a polished stainless steel bezel.

2. Fitur

• Indicating Range: 0-999 knots (knot, km/h, and mph available).
• Gawé Voltage: Compatible with 12V/24V electrical systems.
• Pilihan lampu latar: User-selectable red and yellow backlight.
• fungsi: Displays current speed, accumulated mileage, and direction/compass.
• Daya tahan: 100% waterproof (IP67 protection grade) and excellent anti-fogging function.
• Pangwangunan: 316 Stainless steel bezel with curved glass.
• Sumber sinyal: Receives signal directly from satellite signal receiver (GPS antenna included).
• Pamasangan: Convenient multi-plug socket connecting way for easy setup.

3. Eusi Paket

Saatos muka bungkusan, mangga pariksa yén sadaya komponén di handap ieu aya sareng dina kaayaan anu saé:

• KUS Digital GPS Speedometer Gauge (85mm)
• Mating GPS Antenna
• Multi-plug Socket Wiring Harness
• Instrument Installation Accessories (mounting bracket, nuts)

Figure 2: Contents of the KUS Digital GPS Speedometer Gauge package, showing the main gauge unit, the GPS antenna with its cable, and the electrical wiring harness.

4. Setup jeung Instalasi

Proper installation is crucial for the accurate and reliable operation of your GPS speedometer. It is recommended that installation be performed by a qualified technician.

4.1 Mounting the Gauge

1. Choose a suitable location on your dashboard or panel that is flat, stable, and provides clear visibility.
2. Ensure there is sufficient space behind the panel for the gauge body and wiring.
3. Cut a mounting hole with a diameter of 85mm (3-3/8 inches).
4. Insert the gauge into the mounting hole.
5. Secure the gauge using the provided mounting bracket and nuts from the rear of the panel. Tighten securely but do not overtighten.

4.2 Sambungan Wiring

Connect the multi-plug socket wiring harness to the back of the gauge. Ensure connections are secure and waterproofed where necessary.

• Kawat beureum: Connect to +12V/24V DC power supply (ignition switched).
• Kawat Hideung: Nyambung ka taneuh (-).
• Yellow/Orange Wire: Connect to dashboard illumination for backlight control (optional, can be connected to +12V/24V for constant backlight).
• Kawat Biru: (If present) Connect to external switch for unit change or other functions as per specific model.

4.3 Instalasi anteneu GPS

The GPS antenna is critical for signal reception. Install it in a location with a clear, unobstructed view of the sky. Avoid placing it under metal structures or near other electronic devices that may cause interference.

• Mount the GPS antenna securely using its adhesive base or mounting screws.
• Route the antenna cable to the back of the speedometer, ensuring it is protected from damage and moisture.
• Connect the antenna cable to the designated port on the speedometer.

5. Operasi

5.1 Powering On

Once properly installed and wired, turn on the vessel's ignition. The speedometer will power on and begin searching for GPS satellite signals. This process may take a few moments, especially during the first use or after a long period of inactivity.

5.2 Maca Tampilan

The digital display shows several pieces of information:

• SOG (Speed Over Ground): This is the primary speed reading, typically displayed in large digits.
• Unit: The speed unit (Knots, Km/h, or Mph) will be indicated next to the SOG value.
• COG (Kursus di Luhur taneuh): Indicates the current direction of travel.
• Odometer/Méter Perjalanan: Displays accumulated mileage or trip distance.

5.3 Changing Units and Backlight

The gauge typically has a button or a sequence of button presses to cycle through speed units (Knots, Km/h, Mph) and to change the backlight color (red/yellow). Refer to the specific button on your gauge or consult the wiring diagram for external switch functionality if applicable.

6. Pangropéa

The KUS GPS Speedometer is designed for low maintenance. Follow these guidelines to ensure its longevity:

• beberesih: Bersihkeun beungeut alat ukur ku lap anu lemes,amp cloth. Do not use abrasive cleaners or solvents, as they may damage the display or bezel.
• Sambungan: Periodically check all electrical connections for corrosion or looseness. Ensure waterproof seals are intact.
• Anteneu GPS: Keep the GPS antenna free from obstructions and dirt. Ensure its mounting is secure.
• Panyimpenan: If the vessel is stored for an extended period, ensure the power to the gauge is disconnected.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

KUS products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or contact your authorized KUS dealer. In case of technical issues or support inquiries, please reach out to the seller or manufacturer's customer service department.

For further assistance, you may visit the official KUS website or contact their support channels. Please have your model number (KY08109) and purchase details ready when contacting support.