Manual Instruksi Alat Ukur Tekanan Oli VDO 350-11800 Cockpit Marine 80PSI

1. Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of your VDO 350-11800 Cockpit Marine 80PSI Oil Pressure Gauge. Designed for marine applications, this gauge accurately monitors engine oil pressure, ensuring optimal performance and early detection of potential issues. Please read these instructions thoroughly before installation and use.

2. Fitur Produk

• Black dial with black bezel
• 0-80 PSI range
• 2 1/16" mounting diameter (52mm)
• Works with all 240-33 Ohm common marine oil pressure senders
• 12V illumination bulb

3. Eusi Paket

• VDO 350-11800 Cockpit Marine 80PSI Oil Pressure Gauge

4. Setup jeung Instalasi

Proper installation is crucial for the accurate and safe operation of your VDO oil pressure gauge. If you are unfamiliar with marine electrical systems, it is recommended to seek assistance from a qualified marine technician.

Gambar: Hareupeun view of the VDO 350-11800 Cockpit Marine 80PSI Oil Pressure Gauge, featuring a black dial with white markings and needle, and a black bezel.

• Kasalametan munggaran: Disconnect the vessel's battery before beginning any electrical work.
• Pamasangan: Select a suitable location on your dashboard or instrument panel. The gauge requires a 2 1/16" (52mm) mounting hole. Ensure sufficient clearance behind the panel for wiring and connections.
• Sambungan Wiring:
  • Power (Ignition Switched 12V): Connect the gauge's positive terminal (typically marked "+") to a switched 12V power source. This ensures the gauge is only active when the ignition is on.
  • taneuh: Connect the gauge's negative terminal (typically marked "-") to a reliable vessel ground.
  • Sender Connection: Connect the gauge's sender input terminal (typically marked "S" or "Sender") to the output terminal of a compatible 240-33 Ohm marine oil pressure sender. The sender must be installed in the engine's oil pressure port.
  • Illumination (12V): Connect the illumination wire to a 12V switched power source, typically from the vessel's navigation light circuit, to enable backlighting.
• Uji coba: After installation, reconnect the battery and turn on the ignition. The gauge needle should move to indicate oil pressure once the engine is running. Check for proper illumination.

5. Parentah Operasi

The VDO 350-11800 oil pressure gauge provides a continuous reading of your engine's oil pressure in PSI. Normal operating pressure can vary depending on the engine type, RPM, and oil temperature. Consult your engine's service manual for specific recommended oil pressure ranges.

• Maca Alat Ukur: The white needle indicates the current oil pressure on the black dial, marked from 0 to 80 PSI.
• Ngawaskeun: Regularly observe the gauge during engine operation. A sudden drop or unusually low reading may indicate a problem with the engine's lubrication system and requires immediate attention.
• Iluminasi: The gauge features 12V illumination for visibility in low-light conditions.

6. Pangropéa

Your VDO oil pressure gauge is designed for durability and requires minimal maintenance.

• beberesih: Bersihkeun beungeut jeung bezel gauge ku lap lemes,amp lawon. Hindarkeun pembersih atanapi pangleyur anu abrasif anu tiasa ngaruksak lapisan atanapi lénsa.
• Pamariksaan: Periodically inspect all wiring connections for corrosion or looseness. Ensure the oil pressure sender is securely installed and free from leaks.
• Perlindungan Lingkungan: While designed for marine use, protect the gauge from direct, prolonged exposure to harsh elements when possible to extend its lifespan.

7. Cara ngungkulan

• Gauge Not Functioning (No Reading):
  • Check all power and ground connections for proper contact and voltage.
  • Verify the 12V power source is active when the ignition is on.
  • Inspect the sender wiring for breaks or corrosion.
  • Ensure the oil pressure sender is correctly installed and functioning.
• Incorrect Reading:
  • Confirm that a compatible 240-33 Ohm marine oil pressure sender is being used. Incompatible senders will provide inaccurate readings.
  • Check for proper grounding of both the gauge and the sender.
  • Verify the sender is not faulty.
• Teu aya iluminasi:
  • Check the 12V illumination power connection.
  • Inspect the illumination bulb (if replaceable) for failure.

8. Spésifikasi

9. Garansi jeung Rojongan

For specific warranty information and technical support, please refer to the documentation provided with your purchase or contact VDO directly. Keep your proof of purchase for warranty claims.