First Alert PC1210

First Alert PRC710 PC1210 10-Year Combination Carbon Monoxide and Photoelectric Smoke Detector

Instruksi Manual

Produk Leuwihview

The First Alert PRC710 PC1210 is a 10-year sealed battery combination smoke and carbon monoxide alarm. This device integrates a photoelectric sensor for detecting slow smoldering fires and carbon monoxide, while minimizing nuisance alarms. Its design ensures a decade of uninterrupted operation without battery replacement, offering enhanced safety and convenience.

Setup sareng Instalasi

Proper placement and installation are crucial for the effective operation of your First Alert combination alarm. This unit is designed for easy installation with an included mounting bracket.

Disarankeun panempatan

For optimal protection, install smoke alarms on every level of your home, including the basement, and in every bedroom. Carbon monoxide alarms should also be installed on every level and in every bedroom. Avoid placing alarms near cooking appliances, heating vents, or in excessively dusty or humid areas to prevent false alarms.

Diagram showing recommended placement of smoke and carbon monoxide alarms and fire extinguishers in a multi-story house.
Gambar 1: Recommended placement of smoke and carbon monoxide alarms throughout a typical home. Smoke alarms are indicated by a flame icon, CO alarms by a CO icon, and fire extinguishers by a fire extinguisher icon. Alarms are shown in bedrooms, living room, kitchen, hallway, and basement.

Léngkah-léngkah Instalasi

  1. Pilih Lokasi: Choose a location on the ceiling or wall according to the recommended placement guidelines.
  2. Ningkatna bracket: Pasangkeun braket pemasangan kana lalangit atanapi témbok nganggo sekrup anu disayogikeun.
  3. Aktipkeun Batré: The 10-year sealed battery is activated automatically when the alarm is twisted onto the mounting bracket.
  4. Attach Alarm: Sejajarkeun alarm sareng braket pemasangan teras puterkeun searah jarum jam dugi ka konci dina tempatna.
  5. Uji Alarm: Press and hold the Test/Silence button for a few seconds until the alarm sounds. This confirms proper operation.
Hareupeun view of the First Alert PRC710 PC1210 combination smoke and carbon monoxide detector, showing the test/silence button and slim design.
Gambar 2: Hareupeun view of the First Alert PRC710 PC1210 alarm, highlighting its compact and unobtrusive design.
Sisi profile view of the First Alert PRC710 PC1210 combination smoke and carbon monoxide detector, illustrating its slim design.
Gambar 3: Sisi profile of the alarm, demonstrating its slim form factor which allows it to blend seamlessly with home decor.

Parentah Operasi

Once installed, your First Alert combination alarm operates continuously. Familiarize yourself with its indicators and functions.

Nguji Alarm

Test the alarm weekly by pressing and holding the Test/Silence button until the alarm sounds. The alarm will emit a series of beeps and flashes, indicating that the smoke and CO sensing functions are working correctly. Release the button to stop the test.

Fitur tiiseun

In case of a nuisance alarm (e.g., from cooking smoke), press the Test/Silence button to temporarily silence the alarm for several minutes. The alarm will automatically reset after the silence period if the smoke or CO concentration has cleared. If the condition persists, the alarm will reactivate.

Indikator LED

The alarm features an LED indicator that provides visual status updates:

Pangropéa

Regular maintenance ensures your alarm functions correctly and provides reliable protection.

beberesih

Clean your alarm at least once a month. Use a soft brush or vacuum cleaner with a soft brush attachment to remove dust and debris from the alarm's vents. Do not use cleaning solvents or spray directly onto the alarm.

Émbaran batré

This alarm is equipped with a sealed 10-year lithium battery. The battery is designed to power the unit for its entire lifespan, eliminating the need for replacement. Do not attempt to replace the battery.

Pamérésan masalah

If your alarm is not functioning as expected, refer to the following common issues and solutions:

MasalahMungkin Cukang lantarananaSolusi
Alarm disada sacara berkalaEnd-of-life warning or malfunction.If the alarm is chirping and the LED is yellow, the unit has reached its end-of-life and needs to be replaced. If it's not end-of-life, ensure the unit is clean and properly mounted.
False alarms (e.g., from cooking)Alarm too close to cooking area or excessive steam/humidity.Press the Test/Silence button to temporarily silence. Relocate the alarm if false alarms are frequent due to placement. Ensure proper ventilation during cooking.
Alarm henteu disada nalika tésUnit teu diaktipkeun atanapi aya gangguan fungsi.Ensure the alarm is properly twisted onto the mounting bracket to activate the battery. If it still doesn't work, the unit may be faulty and require replacement.

spésifikasi

FiturRincian
Nomer modélPC1210
Nomer BagianPRC710
Sumber Daya10-Year Sealed Lithium Metal Battery (included)
Tipe sénsorFotolistrik (Haseup), Éléktrokimia (CO)
Jenis AlarmAudible (85 dB at 10 feet)
Item Beurat6.4 ons
Dimensi produk3.13 x 9 x 6 inci
UPC029054016027
minuhanMeets UL standards & complies with legislative requirements for 10-year battery operated smoke alarms.

Garansi sareng Rojongan

The First Alert PRC710 PC1210 combination alarm comes with a 10-year limited warranty, covering defects in materials and workmanship under normal use and service. For detailed warranty information or technical support, please refer to the documentation included with your product or visit the official First Alert websitus.