1. Bubuka
This manual provides comprehensive instructions for the installation, operation, and maintenance of the FEIG ID ISC.PR100 Proximity Reader. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
The FEIG ID ISC.PR100 is a high-performance proximity reader designed for various applications requiring reliable RFID tag detection. It operates at 13.56MHz and offers a significant reading range.
2. Émbaran Kasalametan
Salawasna merhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan kana alat:
- Ensure the power supply matches the device's specifications (12-24VDC).
- Ulah ngalaan alat ka suhu ekstrim, kalembaban, atawa sinar panonpoé langsung.
- Hindarkeun ragrag atanapi ngagentoskeun alat kana tabrakan anu kuat.
- Ulah nyobian muka atawa ngalereskeun alat sorangan. Rujuk sadayana jasa ka tanaga anu mumpuni.
- Cabut daya sateuacan ngalaksanakeun pamasangan atanapi pangropéa naon waé.
3. Produk Langkungview
The FEIG ID ISC.PR100 Proximity Reader is a compact and robust device. Key features include:
- Frékuénsi operasi: 13.56MHz
- Masukan Voltage: 12-24VDC
- Maximum Signal Range: 180mm
- Interface: RS-232 / RS-485
- Supported Transponders: ISO-tags 15639
- Flash Memory: 64 kByte
- Kelas panyalindungan: IP 30
Figure 3.1: FEIG ID ISC.PR100 Proximity Reader. This image shows the compact grey rectangular device with a visible connector port on one end, indicating its robust design for industrial applications.
4. Setup jeung Instalasi
Follow these steps for proper installation of your ISC.PR100 Proximity Reader:
- Pamasangan: Securely mount the reader in the desired location using appropriate fasteners. Ensure adequate ventilation and avoid mounting near strong electromagnetic interference sources.
- Sambungan Daya: Connect the 12-24VDC power supply to the designated power input terminals. Observe correct polarity.
- Sambungan Antarmuka Data: Connect the reader to your host system using either the RS-232 or RS-485 interface, as required by your application. Refer to the device's pinout diagram for correct wiring.
- Penempatan anteneu: Position the reader's antenna (if external) or the integrated antenna area to optimize read range and performance for your specific transponders.
- Power-Up mimiti: Once all connections are secure, apply power to the device. The reader should perform a self-test and indicate readiness (e.g., via an LED indicator).
5. Parentah Operasi
The ISC.PR100 operates by detecting ISO-tags 15639 transponders within its read range. Operation is typically controlled by a host system via the connected interface (RS-232/RS-485).
5.1 Operasi Dasar
- Ensure the reader is powered on and connected to the host system.
- Place an ISO-tag 15639 transponder within the reader's effective range (up to 180mm).
- The reader will detect the transponder and transmit its data to the host system according to the configured communication protocol.
5.2 Protokol Komunikasi
Detailed information regarding the communication protocol (commands, responses, data formats) for RS-232 and RS-485 interfaces can be found in the technical documentation provided by FEIG. It is essential to configure your host system to match the reader's communication settings (e.g., baud rate, parity, data bits, stop bits).
6. Pangropéa
The FEIG ID ISC.PR100 Proximity Reader is designed for low maintenance. However, regular care can extend its lifespan and ensure optimal performance.
- beberesih: Use a soft, dry cloth to clean the exterior of the device. Do not use abrasive cleaners, solvents, or excessive moisture.
- Pamariksaan: Periodically inspect cables and connectors for any signs of wear or damage. Ensure all connections are secure.
- Lingkungan: Jaga lingkungan operasi dina kisaran suhu sareng kalembaban anu ditangtukeun pikeun nyegah karusakan.
7. Cara ngungkulan
If you encounter issues with your ISC.PR100, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat henteu hurung. | Taya catu daya; salah voltage; kabelna rusak. | Check power connections and supply voltage. Ensure cables are not damaged. |
| Cannot read transponders. | Transponder out of range; incorrect transponder type; interference; faulty reader. | Ensure transponder is within 180mm range. Verify it's an ISO-tag 15639. Check for strong electromagnetic fields nearby. |
| Communication errors with host system. | Incorrect interface settings (baud rate, etc.); faulty data cable; software issue. | Verify communication settings match between reader and host. Check data cable integrity. Consult host system software documentation. |
If the problem persists after attempting these solutions, please contact FEIG technical support.
8. Spésifikasi
| Parameter | Nilai |
|---|---|
| Modél | ISC.PR100 |
| Operasi Voltage | 12-24VDC |
| Konsumsi Daya | 5VA Maksimum |
| Frékuénsi Operasi | 13.56MHz |
| Maximum Signal Range | 180 mm |
| Panganteur | RS-232 / RS-485 |
| Dirojong Transponders | ISO-tags 15639 |
| Mémori Flash | 64 kbyte |
| Kelas panyalindungan | IP 30 |
| ASIN | B01E803L08 |
| Produsén | FEIG |
| Tanggal Kahiji Sadia | 1 April 2016 |
9. Garansi jeung Rojongan
For warranty information and technical support, please refer to the official FEIG websitus atanapi hubungi distributor resmi anjeun. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.
FEIG is committed to providing high-quality products and excellent customer service. Should you require assistance beyond the scope of this manual, do not hesitate to reach out to their support channels.
