Bubuka
The Lumitec Mirage LED Down Light is engineered for superior performance and efficiency, revolutionizing the category of LED ceiling lights. Designed for both interior and exterior applications, these lights feature a remarkably slim profile and deliver up to 300% more light output compared to traditional 20W halogens. This manual provides essential information for the safe and effective installation, operation, and maintenance of your Lumitec Mirage LED Down Light.
Émbaran Kasalametan
Please read all instructions carefully before installation and operation. Failure to do so may result in property damage, personal injury, or death.
- Always disconnect power before installing, servicing, or cleaning the fixture.
- Pastikeun sadaya sambungan kabel aman sareng sasuai sareng kode listrik lokal.
- Ulah ngarobah fixture dina sagala cara. Parobihan anu teu sah tiasa ngabatalkeun jaminan sareng nyiptakeun bahaya kaamanan.
- This product is designed for 10-30V DC systems. Verify your power source matches the product specifications.
- Hindarkeun paparan panon langsung kana sumber cahaya nalika dicaangan.
- If the fixture is damaged, do not operate it. Contact qualified personnel for repair or replacement.
Eusi pakét
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- Lumitec Mirage LED Flush Mount Ceiling Down Light
- Mounting Hardware (e.g., spring clips)
- Manual Pitunjuk (dokumén ieu)
Pamasangan
The Lumitec Mirage LED Down Light features a flush mount design with a shallow mounting depth, making installation straightforward. For detailed installation instructions, please refer to the official Manual Instalasi (PDF) provided by Lumitec.
- Nyiapkeun Permukaan Pemasangan: Choose a flat, stable surface for mounting. Ensure there is sufficient clearance behind the surface for the light fixture and wiring.
- Cut Mounting Hole: Using a suitable hole saw, cut a circular opening in the mounting surface. Refer to the product specifications or the PDF manual for the exact diameter required (typically around 3.25 inches / 8.25 cm).
- Wiring: Connect the light fixture's wires to your 10-30V DC power supply. Ensure correct polarity (red to positive, black to negative). Use appropriate marine-grade connectors for a secure and waterproof connection.
- Perlengkapan Aman: Insert the light fixture into the prepared hole. The spring-loaded clips on the side of the fixture will secure it firmly in place against the mounting surface.
- Fungsi Uji: Restore power and test the light to ensure proper operation.
Gambar: Hareupeun view of the Lumitec Mirage LED Flush Mount Ceiling Down Light, showing the glass housing and slim profile.
Gambar: Sisi view of the Lumitec Mirage LED Flush Mount Ceiling Down Light, highlighting the heat sink fins and mounting clips.
Gambar: luhur-handap view of the Lumitec Mirage LED Flush Mount Ceiling Down Light, showing the circular design.
Gambar: Angled view of the Lumitec Mirage LED Flush Mount Ceiling Down Light, showcasing faktor bentukna anu ringkes.
Image: Technical drawing showing the dimensions of the Lumitec Mirage LED Flush Mount Ceiling Down Light, including diameter and mounting depth.
Parentah Operasi
The Lumitec Mirage LED Down Light is designed for simple operation. Depending on your specific model and wiring, the light can be controlled via a standard on/off switch.
- Basic On/Off: Toggle your connected power switch to turn the light on or off.
- Color Cycling (Multi-Color/Spectrum Models): For models with multiple color outputs (White, Red, Blue, Purple, or Spectrum RGBW), rapid toggling of the power switch (within 1-2 seconds) will cycle through the available colors. Pause on the desired color.
- Dimming (Dimming Models): For dimming models, holding the power switch in the "on" position for a few seconds may activate dimming functionality. Release the switch at the desired brightness level. Refer to the specific wiring diagram for your dimming system.
Image: Multiple Lumitec Mirage LED lights installed in the ceiling of a boat cabin, providing overhead illumination.
Pangropéa
The Lumitec Mirage LED Down Light is designed for durability and minimal maintenance. Follow these guidelines to ensure long-lasting performance:
- beberesih: Clean the light fixture periodically with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents, as they may damage the finish or lens.
- Pamariksaan: Regularly inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure the mounting is secure.
- Segel waterproof: As the fixture is IP67 rated, ensure the mounting surface and installation maintain the integrity of its waterproof seal, especially in marine environments.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Light does not illuminate. | No power, incorrect wiring, faulty switch, or blown fuse. | Check power supply, verify wiring connections (polarity), inspect switch and fuse. |
| Lampu kedip-kedip atanapi redup teu disangka-sangka. | Loose connection, insufficient voltage, or incompatible dimmer. | Tighten all connections, ensure stable 10-30V DC supply, verify dimmer compatibility if applicable. |
| Incorrect color output (Multi-Color/Spectrum models). | Improper power cycling or internal issue. | Ensure proper power cycling technique. If issue persists, contact support. |
spésifikasi
- Kaluaran cahaya: 300 Lumén (Bodas)
- Operasi Voltage: 10-30VDC
- Undian ayeuna: 500mA at 12V DC, 260mA at 24V DC
- Rating waterproof: IP67 (Completely water sealed)
- jerona dipasang: Kurang leuwih 1 inci
- Bezel Options: Glass Housing (as per this model), also available in Polished and White Housing.
- Asal: Dijieun di AS
Image: A graphic detailing key features of the Lumitec Mirage LED Down Light, including multi-color output options, shallow mounting depth, IP67 compliance, bezel designs, easy installation, salt spray testing, and USA manufacturing.
Image: A diagram illustrating the beam pattern and illuminance at various distances for the Lumitec Mirage LED Down Light, along with an Iso Candela Plot.
Garansi sareng Rojongan
Lumitec products are designed and manufactured to the highest standards. For information regarding warranty coverage and technical support, please visit the official Lumitec websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun pikeun klaim jaminan.
Kanggo inpo tambahan, anjeun tiasa nganjang ka Lumitec Store on Amazon.
