Buku Panduan Pambuka Gerbang Geser BENINCA Bull 424R

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your BENINCA Bull 424R Sliding Gate Opener. The Bull 424R is a silent, powerful, and reliable 24VDC operator designed for intensive use with sliding gates. It features an LCD display for easy programming, internal limit-switches, and multiple electronic settings for torque and timing adjustments.

Please read this manual thoroughly before beginning installation or operation to ensure safe and correct use of the product.

2. Émbaran Kasalametan

PERHATOSAN: Gagal nuturkeun parentah kaamanan ieu bisa ngakibatkeun tatu serius atawa karuksakan harta.

• Installation must be performed by qualified personnel in compliance with local safety regulations.
• Pastikeun catu daya dipegatkeun samemeh ngalakukeun pamasangan, pangropéa, atanapi perbaikan.
• Keep hands, feet, and clothing clear of the gate and opener mechanism during operation.
• Ulah ngawenangkeun barudak pikeun maénkeun kalayan atawa beroperasi kadali opener gerbang.
• Regularly inspect the gate and opener for signs of wear, damage, or misalignment.
• Ensure all safety devices (e.g., photocells, safety edges) are correctly installed and functioning.

3. Eusi Paket

Pastikeun yén sadaya komponén anu didaptarkeun di handap aya dina pakét anjeun:

• BENINCA Bull 424R Sliding Gate Opener Unit
• Panel Kontrol (terintegrasi)
• Unit panarima
• Two (2) Remote Controls
• Five (5) sections of 39-inch Rack Gear
• Installation Hardware (bolts, nuts, washers - specific quantities may vary)
• Manual pangguna (dokumén ieu)

Figure 3.1: Complete BENINCA Bull 424R Sliding Gate Opener kit components.

4. Setup jeung Instalasi

4.1 Pamasangan mékanis

1. Pasang Opener: Securely mount the BENINCA Bull 424R motor unit on a stable, level concrete base next to the gate, ensuring proper alignment with the gate's movement path.
2. Installing the Rack Gear: Attach the rack gear sections along the bottom edge of the sliding gate. Ensure the rack meshes correctly with the opener's pinion gear, maintaining a small clearance (approximately 1-2mm) to prevent binding.
3. Ngatur wates switch: Adjust the internal limit switches to define the gate's fully open and fully closed positions. Refer to the control panel's specific instructions for precise adjustment.

4.2 Sambungan Listrik

Sadaya sambungan listrik kedah dilakukeun ku tukang listrik anu mumpuni.

1. Sasayogian tanaga: Connect the 24VDC power supply to the designated terminals on the control board. Ensure correct polarity.
2. Alat kaamanan: Connect any external safety devices, such as photocells or safety edges, to their respective terminals on the control board.
3. Unit panarima: Connect the included receiver unit to the control board. This unit allows the remote controls to operate the gate.

Figure 4.1: BENINCA Receiver and Remote Control Kit.

4.3 Programming the Control Panel and Remotes

The BENINCA Bull 424R features an LCD display for easy programming and digital adjustment of torque and timing.

1. Power-Up mimiti: After all electrical connections are made, apply power to the unit. The LCD display will illuminate.
2. Ngaksés Menu: Use the control panel buttons (usually labeled MENU, UP, DOWN, ENTER) to navigate the programming menu.
3. Learning Remote Controls: Follow the on-screen instructions to program the remote controls. Typically, this involves selecting a "Learn Remote" option and pressing a button on each remote control.
4. Nyaluyukeun parameter: Utilize the menu to set parameters such as motor torque, gate speed, automatic closing time, and obstacle detection sensitivity.

Figure 4.2: BENINCA Remote Control.

5. Parentah Operasi

Once installed and programmed, operating your BENINCA Bull 424R gate opener is straightforward.

5.1 Ngagunakeun Remote Control

• Press the designated button on your remote control once to open the gate.
• Press the button again while the gate is moving to stop it.
• Press the button a third time to reverse the gate's direction (if stopped mid-cycle) or to close it (if fully open).

5.2 Kaluaran Manual

In case of power failure or malfunction, the gate can be operated manually. Locate the manual release mechanism on the motor unit (refer to the specific diagram in your product's quick start guide for exact location). Engage the release mechanism to disengage the motor, allowing the gate to be moved by hand.

6. Pangropéa

Pangropéa rutin ngajamin umur panjang sareng operasi anu dipercaya tina pembuka gerbang anjeun.

• Bulanan: Inspect the gate's movement for any obstructions. Check the rack gear for debris and ensure it is securely fastened.
• triwulanan: Lubricate the gate's wheels, hinges, and any moving parts as recommended by the gate manufacturer. Check the condition of the power cable and all electrical connections.
• taunan: Have a qualified technician inspect the entire system, including the motor, control board, safety devices, and gate structure, for wear or damage.

CAUTION: Always disconnect power to the unit before performing any maintenance.

7. Cara ngungkulan

This section addresses common issues you might encounter with your BENINCA Bull 424R gate opener.

8. Spésifikasi

Key technical specifications for the BENINCA Bull 424R Sliding Gate Opener:

• model: BENINCA Bull 424R
• Pabrikan: Bénika
• Tipe Motor: 24VDC
• Panél kontrol: Terintegrasi sareng tampilan LCD
• Batesan Saklar: Internal
• Pemrograman: Digital adjustment for torque and timing
• ASIN: B01FG7NE18
• Titimangsa munggaran sadia: 22 April 2018

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized BENINCA dealer. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official BENINCA websitus atanapi ngahubungan departemén layanan palanggan maranéhna.