Project Source Ceiling Fixture Instruction Manual

1. Produk Langkungview

This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source Semi-Flushmount Ceiling Fixture. Designed for indoor use, this fixture features a white finish and an elegant etched frosted glass shade, providing diffused light suitable for various living spaces.

Image 1.1: The Project Source Semi-Flushmount Ceiling Fixture, showcasing its white base and decorative etched frosted glass shade.

2. Émbaran Kasalametan

Mangga baca sareng ngartos sadayana petunjuk sateuacan ngamimitian pamasangan. Paranti nuturkeun parentah ieu bisa ngakibatkeun shock listrik, seuneu, atawa bahaya sejenna nu bisa ngabalukarkeun tatu atawa karuksakan harta.

• PERHATOSAN: To avoid electric shock, disconnect power at the circuit breaker or fuse box before installation.
• Sadaya sambungan listrik kedah saluyu sareng kode lokal, ordinances, atanapi National Electric Code (NEC). Taroskeun ka tukang listrik anu mumpuni upami anjeun teu wawuh sareng kabel listrik.
• Ulah masang alat ieu dina kaayaan baseuh atawa baseuhamp lokasi.
• Nanganan komponén kaca kalayan ati-ati pikeun nyegah pegatna sareng tatu.
• Mastikeun fixture geus aman dipasang kana unsur struktural siling.
• Use only the type and wattage of bulbs specified for this fixture.

3. Eusi Paket

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

• Semi-Flushmount Ceiling Fixture Body (1)
• Etched Frosted Glass Shade (1)
• Mounting Hardware Kit (includes screws, wire nuts, mounting bracket) (1 set)
• Decorative Finial (1)
• Buku Panduan (dokumen ieu) (1)

4. Setup jeung Instalasi

Parabot Diperyogikeun (henteu kalebetkeun): Obeng Phillips, obeng pipih, pengupas kawat, pita listrik, kacamata pengaman, tangga.

1. Pareuman Daya: Locate the circuit breaker or fuse box that controls the power to the light fixture you are replacing or installing. Turn off the power completely. Verify power is off using a voltage panguji.
2. Nyiapkeun pamasangan: If replacing an existing fixture, carefully remove it. Attach the mounting bracket (if not pre-attached) to the electrical junction box in the ceiling using the provided screws. Ensure the bracket is secure.
3. Sambungan Kawat:
   • Nyambungkeun hideung kawat ti fixture kana hideung (panas) kawat ti kotak simpang maké nut kawat.
   • Nyambungkeun bodas kawat ti fixture kana bodas (nétral) kawat ti kotak simpang maké nut kawat.
   • Nyambungkeun tambaga héjo atanapi bulistir ground wire from the fixture to the taneuh wire from the junction box (or to the green ground screw on the mounting bracket) using a wire nut.
   • Taliti keun sadaya kawat kana kotak simpang.
4. Attach Fixture Body: Align the fixture body with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the ceiling and stable.
5. Pasang Bulbs: Insert the recommended type and wattage of light bulbs (not included) into the sockets. Do not exceed the maximum wattage dituduhkeun dina fixture nu.
6. Pasang Kaca Shade: Carefully place the etched frosted glass shade onto the fixture body. Secure it in place using the decorative finial by screwing it onto the threaded rod at the bottom of the fixture until snug. Do not overtighten.
7. Mulangkeun Daya: Once installation is complete and all components are secure, restore power at the circuit breaker or fuse box. Test the light fixture.

5. Parentah Operasi

This Project Source ceiling fixture is designed for simple operation. Once properly installed and powered, it can be controlled via a standard wall switch. If your electrical setup includes a dimmer switch, ensure it is compatible with the type of bulbs you are using.

The product specifications indicate a "Remote" control method. If your specific model includes a remote control, please refer to the separate remote control instructions for pairing and operation. Otherwise, the fixture operates solely via the wall switch.

6. Pangropéa

Regular maintenance will help preserve the appearance and functionality of your ceiling fixture.

• beberesih: Always turn off power to the fixture and allow it to cool before cleaning. Wipe the fixture body with a soft, dry cloth. For the glass shade, use a mild glass cleaner applied to a cloth (not directly to the glass) and wipe gently. Do not use abrasive cleaners or solvents.
• Ngagantian bohlam: Ensure power is off and bulbs are cool before attempting to replace them. Unscrew the decorative finial and carefully remove the glass shade. Replace old bulbs with new ones of the correct type and wattage. Reattach the glass shade and finial.

7. Cara ngungkulan

Upami anjeun mendakan masalah sareng fixture anjeun, tingal masalah sareng solusi umum ieu:

If the problem persists after attempting these solutions, consult a qualified electrician or contact customer support.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information or technical support, please refer to the documentation included with your purchase or contact Project Source customer service. Keep your purchase receipt for warranty claims.

Pikeun pitulung salajengna, anjeun tiasa nganjang ka produsén website or contact their support line. Contact details are typically found on the product packaging or the manufacturer's official websitus.