Bubuka
Hatur nuhun pikeun meuliasing the Amazon Basics High-Security Cross-Cut Shredder. This manual provides important information regarding the safe operation, maintenance, and troubleshooting of your new shredder. Please read it thoroughly before use and retain it for future reference.
Parentah Kasalametan
Pikeun ngirangan résiko tatu atanapi karusakan, mangga perhatoskeun tindakan pencegahan kaamanan ieu:
- Jaga ramo, pakean anu leupas, rambut, sareng perhiasan jauh tina liang asupna kertas.
- Jauhkeun barudak sareng piaraan tina mesin penghancur.
- Unplug the shredder when not in use or before moving/cleaning.
- Do not shred metal objects, adhesive labels, or wet paper.
- Do not exceed the maximum sheet capacity (7-8 sheets of 70gsm paper).
- Avoid continuous operation for more than 3 minutes to prevent overheating. Allow 30 minutes cool-down time after continuous use.
- Ulah ngoperasikeun mesin penghancur upami kabel listrikna rusak.
Produk Leuwihview
Familiarize yourself with the components of your shredder:
- Kepala Pamotong: Contains the cutting blades and motor.
- Slot Éntri Kertas: Where paper and credit cards are inserted.
- Saklar kontrol: For selecting ON, OFF, and REVERSE modes.
- Tempat Sampah: Collects shredded material. Features a clear window to monitor fill level.
- Overheat Indicator LED: Illuminates when the shredder needs to cool down.
Gambar: Hareupeun view of the Amazon Basics Cross-Cut Shredder, showing the shredder head, paper entry, and waste bin with clear window.
Disetél
- Ngabongkar: Sacara saksama miceun sadaya komponén tina bungkusan.
- ngumpul: Place the shredder head securely onto the waste bin. Ensure it is properly seated to allow the shredder to operate.
- posisi: Place the shredder on a flat, stable surface. Ensure the power cord can reach a standard electrical outlet without strain.
- Sambungkeun Kakuatan: Colokkeun kabel listrik kana stop kontak listrik anu cocog.
Image: The shredder head lifted off the waste bin, illustrating how the two main components separate for setup and emptying.
Parentah Operasi
Ngarecah Kertas
- Set the control switch to the "ON" (Auto) position. The shredder is now in standby mode.
- Insert up to 7-8 sheets of paper (70gsm) straight into the paper entry slot. The shredder will automatically start and stop once the paper has passed through.
- For thicker paper or fewer sheets, the shredder will adjust automatically.
Ngarobek Kartu Kredit
- Set the control switch to the "ON" (Auto) position.
- Insert one credit card at a time into the center of the paper entry slot. The shredder will automatically shred the card.
Ngabersihan Paper Jam
- If a paper jam occurs, set the control switch to the "REVERSE" position. This will reverse the shredding mechanism to clear the jam.
- If the jam persists, switch to "OFF", unplug the unit, and carefully remove the jammed paper manually.
- Once cleared, plug the unit back in and resume shredding.
Image: The shredder actively processing paper, demonstrating the paper entry slot in use.
Video: An official product video demonstrating the Amazon Basics High-Security Cross-Cut Shredder in operation, showing its ability to shred paper and credit cards.
Pangropéa
Ngosongkeun Tempat Sampah
When the waste bin is full, the shredder will stop operating. The clear window allows you to monitor the fill level.
- Set the control switch to "OFF" and unplug the shredder.
- Angkat sirah mesin penghancur tina tempat runtah kalayan ati-ati.
- Empty the shredded material from the bin into a recycling container.
- Pasangkeun deui sirah mesin penghancur kalayan pageuh kana tempat runtah.
- Plug the shredder back in to resume operation.
Image: The empty waste bin of the shredder, highlighting its capacity and design for easy emptying.
Ngabersihan Shredder
- Always unplug the shredder before cleaning.
- Wipe the exterior of the shredder with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Regularly oil the shredder blades (e.g., every 30 minutes of cumulative shredding or once a month) using shredder oil sheets or liquid shredder oil applied to a sheet of paper. This helps maintain performance and prolong the life of the blades.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Shredder teu hurung. | Not plugged in; shredder head not seated correctly; overheat protection activated. | Ensure power cord is securely plugged in. Re-seat the shredder head firmly onto the bin. Allow 30 minutes for the unit to cool down if the overheat LED is on. |
| Kertas macét. | Too many sheets inserted; paper inserted incorrectly. | Switch to "REVERSE" to clear. If persistent, unplug and manually remove paper. Reduce sheet count for future shredding. |
| Shredder eureun nalika operasi. | Overheat protection activated; waste bin full. | Allow 30 minutes cool-down time. Empty the waste bin. |
| Shredded material is not fine enough. | Not applicable for cross-cut shredders (fixed shred size). | This model produces cross-cut particles (0.48 x 4.68 cm), which is a P3 security level. |
spésifikasi
- model: AU864XA
- Jenis Parut: Palang-motong
- Kapasitas lembar: 7-8 sheets (70gsm paper)
- Ukuran Potongan: 0.48 x 4.68 cm
- Tingkat Kaamanan: P3
- Waktu Ngajalankeun Terus-terusan: 3 menit
- Waktu Pendinginan: 30 menit
- Kapasitas bin: 15.5 liter
- Ukuran (L x W x H): 32.5 x 19.7 x 39 cm (12.8 x 7.7 x 15.3 inci)
- beurat: 3.72 kg (8.2 lbs)
- Bahan: Plastic and Metal (Steel)
Pembuangan
When disposing of the shredder, please follow local regulations for electronic waste. The shredder contains electronic components and should not be disposed of with general household waste.
