Keeley Bubble Tron Dynamic Flanger Phaser Instruction Manual

1. Produk Langkungview

The Keeley Bubble Tron Dynamic Flanger Phaser and Random Synth Filter is a versatile effects pedal designed to produce unique modulation sounds. Inspired by classic dynamic flangers and phasers, this pedal offers three distinct modes of operation: Dynamic Flange, Dynamic Phase, and Random Filter. It allows for expressive control over your guitar's signal, reacting to your pick attack and playing dynamics to create a range of sonic textures.

Figure 1: Keeley Bubble Tron Dynamic Flanger Phaser Pedal.

The pedal features a simple yet powerful control layout, allowing users to dial in subtle or extreme effects. Its dynamic response makes it an intuitive tool for guitarists seeking to add expressive modulation to their sound.

2. Setélan

To set up your Keeley Bubble Tron pedal, follow these steps:

1. Sambungan Daya: Connect a standard 9V DC power supply (center negative, 65mA+ current draw) to the 9V jack on the pedal. Ensure the power supply meets these specifications to prevent damage.
2. Sambungan Input: Connect your guitar or other instrument to the "INPUT" jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. Sambungan Kaluaran: Sambungkeun jack "OUTPUT" di sisi kénca pedal ka amplifier atanapi pedal salajengna dina ranté sinyal anjeun nganggo kabel instrumen standar 1/4 inci.
4. Setélan Awal: Before engaging the pedal, set all knobs to their 12 o'clock position and ensure the mode switch is in the middle (Phase) position for a neutral starting point.

3. Parentah Operasi

The Keeley Bubble Tron offers a variety of controls to shape your sound. Familiarize yourself with each knob and switch:

Kadali:

• RATE (FDBK):
  • In Filter & Phase modes: Controls the rate of the LFO.
  • In Flange mode: Controls feedback. Turning left provides maximum negative feedback; turning right provides maximum positive feedback.
• SENS (Sensitipitas):
  • In Filter mode: Controls envelope sensitivity, acting like a synth filter.
  • In Phase & Flange modes: Controls input sensitivity, determining the point at which dynamic control is triggered. Start with this knob at full left and adjust for desired responsiveness.
• DEPTH (Shape):
  • In Filter mode: Selects LFO shape (from full left: ramp nepi, ramp down, random, or triangle).
  • In Phase & Flange modes: Sets the depth of the effect for mild or lush sounds.
• TINGKAT: Ngadalikeun tingkat kaluaran sakabéh éfék.
• KUKUH: Ngahurungkeun sareng mareuman éfékna.

Mode Select Switch:

• UP: Activates Filter mode.
• TENGAH: Activates Phase mode.
• TURUN: Activates Flange mode.

Figure 2: Bank A (Default Mode) Control Layout. This mode is active when the internal switch is set to Bank A.

Internal Mini Toggles (Bank Selection):

The Bubble Tron features internal mini toggles to expand its sonic capabilities. To access these, you will need to remove the back plate of the pedal.

• ANALOG FILTER (Vintage/Modern):
  • Vintage Mode: Rolls off some high frequencies for a warmer tone.
  • Modern Mode: Provides full-range clarity (default setting).
• BANK TOGGLE (Bank 1/Bank 2):
  • Bank 1 (Default): Offers Sample & Hold Filter, Dynamic Phaser, and Dynamic Flanger modes.
  • Bank 2: Offers Envelope Filter, Standard 8-Stage Phaser, and Standard Classic Flanger modes.

Figure 3: Bank B Control Layout. Access this mode by switching the internal Bank Toggle from Bank A to Bank B.

Figure 4: Internal Mini Toggles for Analog Filter and Bank Selection.

Figure 5: External Toggle Switch modes for Bank 1 and Bank 2.

4. Pangropéa

To ensure the longevity and optimal performance of your Keeley Bubble Tron, observe the following maintenance guidelines:

• beberesih: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, as these can damage the finish.
• Panyimpenan: Simpen pedal di tempat anu tiis, garing, sareng jauh tina sinar panonpoé langsung sareng suhu anu ekstrim. Upami henteu dianggo kanggo waktos anu lami, pegatkeun catu daya.
• Sasayogian tanaga: Always use a regulated 9V DC power supply with a center-negative polarity and sufficient current (65mA+). Incorrect power supplies can cause damage and void the warranty.
• Sambungan: Ensure all cables are securely connected. Avoid excessive force when plugging or unplugging cables.

5. Cara ngungkulan

If you encounter issues with your Keeley Bubble Tron, try these troubleshooting steps:

• Henteu aya sora:
  • Pariksa sadaya sambungan kabel (input, output, daya).
  • Verify the power supply is correctly connected and providing the specified 9V DC.
  • Pastikeun alat anjeun sareng amplifier berpungsi leres.
  • Bypass the pedal to confirm the issue is with the pedal itself.
• Sora/Dengung Anu Teu Dipikahoyong:
  • Anggo catu daya anu kualitasna luhur sareng terisolasi.
  • Pariksa kabel faulty.
  • Ensure proper grounding of your amplifier jeung parabot lianna.
• Effect Not Engaging/Responding:
  • Check the footswitch functionality.
  • Adjust the SENS (Sensitivity) knob, especially in dynamic modes, to ensure it's set appropriately for your playing style and instrument output.
  • Verify the MODE SELECT switch is in the desired position.

6. Spésifikasi

7. Garansi jeung Rojongan

For warranty information and technical support, please refer to the official Keeley Electronics websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen bukti pameseran anjeun pikeun klaim garansi.

Resmi Websitus: Keeley Electronics Store