Volteck LED MR16 Lamp 127V 6W Daylight Instruction Manual

1. Bubuka

This instruction manual provides important information for the safe and efficient use of your Volteck LED MR16 Lamp. Ieu lamp is designed to provide bright, energy-efficient illumination with a daylight white color temperature. Please read this manual thoroughly before installation and operation.

Figure 1: Volteck LED MR16 Lamp, showing the multi-LED array and two-pin base.

2. Émbaran Kasalametan

Pegatkeun Daya: Salawasna mastikeun catu daya ka fixture dipareuman saméméh masang, nyoplokkeun, atawa meresihan lamp.
Vol ditangtoskeuntage: Ieu lamp is designed for 127V electrical systems. Do not use with incompatible voltage.
Pamakéan jero rohangan wungkul: This product is intended for indoor use in dry locations. Do not expose to moisture or outdoor elements.
Ulah ngabongkar: Do not attempt to open or modify the lamp. Henteu aya bagian anu tiasa dilayanan ku pangguna di jero.
Hindarkeun Paparan Mata Langsung: Do not stare directly into the operating lamp, as the bright light may cause discomfort.
Nanganan kalayan ati-ati: Ulah nepi ka muragkeun atawa kakeunaan lamp kana dampak anu kuat.

3. Setup jeung Instalasi

Follow these steps to properly install your Volteck LED MR16 lamp:

Pareuman Daya: Locate the light switch or circuit breaker controlling the fixture and turn off the power supply.
Hapus Old Lamp (upami tiasa dianggo): Lamun ngaganti hiji l ayaamp, allow it to cool completely before carefully removing it from the fixture.
Lebetkeun Anyar Lamp: Align the two pins of the Volteck LED MR16 lamp with the corresponding holes in the fixture's socket. Gently push the lamp into the socket until it is securely seated. Do not force it.
Mulangkeun Daya: Sakali dina lamp is securely installed, turn the power supply back on at the switch or circuit breaker.
Tes: Turn on the light switch to verify the lamp fungsina leres.

4. Parentah Operasi

The Volteck LED MR16 lamp operates like a standard light bulb. Simply use the wall switch or fixture control to turn the light on or off. The LED lamp will provide instant full brightness upon activation.

5. Pangropéa

beberesih: Pastikeun kakuatan pareum sareng lamp tiis saméméh beberesih. Ngusap lamp with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or harsh chemicals, as these may damage the lamp.
Henteu aya bagian anu tiasa dianggo pikeun pangguna: Ieu LED lamp does not contain any user-serviceable parts. Attempting to repair or modify the lamp will void any potential warranty and may pose a safety risk.

6. Cara ngungkulan

If you encounter issues with your Volteck LED MR16 lamp, tingal léngkah-léngkah ngungkulan umum ieu:

Lamp Teu hurung:
- Pastikeun catu daya ka alatna hurung.
- Pariksa yén lamp is securely inserted into the fixture's socket.
- Verify that the fixture itself is working correctly (test with another known-good lamp if possible).
- Konfirmasi voltage of your electrical system matches the lamp's requirements (127V).
Lamp Kedip-kedip:
- Pastikeun lamp is fully seated in the socket.
- Check for loose wiring in the fixture or switch (consult a qualified electrician if unsure).
- Verify that the fixture is compatible with LED lamps. Some older dimmer switches may not be compatible with LED technology and can cause flickering.

If these steps do not resolve the issue, please contact Volteck customer support or consult a qualified electrician.

7. Spésifikasi

Fitur	Rincian
merek	Volteck
Nomer modél	46180
Tipe Lampu	LED
Ukuran Bentuk Bohlam	MR16
Warna Cahaya	Beurang Bodas
Voltage	127 volt
Wattage	6 Watts (LED source), 40 watts (equivalent)
Item Beurat	0.704 ons
Dimensi (Pakét)	3.9 x 3.43 x 1.93 inci
Métode kontrol	Remote (Note: This specification might refer to a broader product line capability or a specific remote-controlled fixture, as the bulb itself is typically controlled by a wall switch.)

8. Garansi jeung Rojongan

Specific warranty details for the Volteck LED MR16 Lamp are not provided within this document. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging or visit the official Volteck websitus.

For technical support or further assistance, please contact Volteck customer service through their official channels.

	Parentah Instalasi pikeun Produk Listrik Pitunjuk pamasangan léngkah-léngkah pikeun produk listrik, kalebet peringatan kaamanan sareng spésifikasi produk. Nyertakeun wiring, ningkatna, sarta precautions kaamanan listrik.
	Volteck Electrical Outlet Installation and Safety Guide This guide provides instructions for installing a Volteck electrical outlet, emphasizing safety precautions and proper usage. It includes warnings about electrical hazards and suffocation risks associated with plastic bags.
	Electrical Component Installation Guide and Safety Warnings Comprehensive installation instructions and critical safety warnings for an electrical component, including product specifications, certification details, and usage guidelines. Content is presented in English.
	Volteck LED Luminaire: Specifications, Installation, and Warranty Detailed specifications, step-by-step installation instructions, cleaning guidelines, and warranty information for the Volteck LED luminaire by Grupo Truper. Includes technical details and safety precautions.
	Luminario LED Volteck: Especificaciones e Instructivo de Instalación Información detallada sobre el luminario LED Volteck, incluyendo especificaciones técnicas, guía de instalación paso a paso, garantía y consejos de limpieza. Producto de Grupo Truper.
	Volteck Luminario LED: Especificaciones e Instructivo de Instalación Guía detallada de especificaciones e instalación para el luminario LED Volteck de Grupo Truper, incluyendo datos técnicos, garantía, limpieza y diagramas.

Volteck 46180