tectake Projector Screen User Manual

Produk Leuwihview

The tectake Projector Screen is designed to enhance your home cinema experience, offering a large, high-quality projection surface suitable for HDTV and 3D content. Its versatile design allows for continuous adjustment to various aspect ratios, including 1:1, 4:3, and 16:9.

Constructed with a durable, double-layered vinyl fabric (approx. 360 g/m²), the screen includes a weighted bar to ensure a wrinkle-free projection surface. Black border masking and a black backing enhance contrast, providing a vivid and immersive viewing experience. The robust metal casing allows for both wall and ceiling mounting, making it a flexible solution for any setup.

Image: The tectake Projector Screen in its fully extended position, showcasing the white projection surface and black borders.

Setup sareng Instalasi

Your tectake Projector Screen is designed for easy installation on either a wall or ceiling. Please ensure you have the necessary tools and appropriate fasteners for your specific wall or ceiling material.

Eusi pakét:

• 1 x tectake Projector Screen
• Mounting hardware (screws and wall anchors for wall mounting)
• Instruksi Manual

Parentah Pasang:

1. Pilih Lokasi: Select a suitable location on your wall or ceiling, ensuring it is structurally sound and can support the weight of the screen (approximately 4 kg). Consider viewing angles and projector placement.
2. Tanda titik pangeboran: Tahan layar casing against the desired mounting surface and mark the positions for the mounting brackets. Ensure the marks are level.
3. liang bor: Drill holes at the marked points using an appropriate drill bit for your wall or ceiling material. Insert wall anchors if necessary.
4. Pasang kurung: Secure the mounting brackets to the wall or ceiling using the provided screws.
5. Hang Screen: Carefully lift the projector screen and hook its casing onto the installed mounting brackets. Ensure it is securely seated.

Image: Close-up of the screen's robust metal casing with a mounting bracket and included screws and wall anchors for installation.

Note: For ceiling mounting, additional hooks may be required (not included).

Operating the Projector Screen

The tectake Projector Screen features a smooth roll-up mechanism for easy extension and retraction.

Manjangkeun Layar:

1. Gently pull down on the integrated pull cord or the weighted bar at the bottom of the screen.
2. Pull the screen down to your desired length. The screen can be continuously adjusted to various formats (1:1, 4:3, 16:9, etc.).
3. Once at the desired position, release the cord/bar. The screen will lock into place.

Ngaleupaskeun Layar:

1. Gently pull down on the pull cord/weighted bar again, slightly further than its current position.
2. Release the cord/bar slowly. The screen will smoothly retract back into its casing. Guide it gently to prevent rapid retraction.

Image: Detail of the pull cord and handle mechanism used to extend and retract the projector screen.

Image: The tectake projector screen in use, displaying a high-definition image, demonstrating its visual performance.

Image: The projector screen with an overlay indicating its dimensions of 152x152 cm and a diagonal of 84 inches (214 cm).

Pangropéa

To ensure the longevity and optimal performance of your tectake Projector Screen, follow these simple maintenance guidelines:

• Ngabersihan Permukaan Layar: The vinyl-coated fabric can be cleaned with a damp cloth. Use only mild soap and water if necessary, and wipe gently. Avoid abrasive cleaners or harsh chemicals, as these can damage the screen surface.
• Casing Care: Wipe the metal casing with a soft, dry cloth to remove dust.
• Panyimpenan: When not in use, retract the screen fully into its casing pikeun ngajaga permukaan tina lebu sareng karusakan.
• Mékanisme: The roll-up mechanism is designed to be maintenance-free. Do not attempt to lubricate or disassemble it.

Pamérésan masalah

This section addresses common issues you might encounter with your projector screen.

Screen Does Not Retract/Extend Smoothly:

• Ensure you are pulling the screen straight down and releasing it gently.
• Check for any obstructions around the screen casing or the weighted bar.
• If the screen is fully extended, pull it down slightly further before releasing to engage the retraction mechanism.

Wrinkles or Waves on the Screen Surface:

• The integrated weighted bar is designed to keep the screen flat. Minor waves, especially when new, may diminish over time with regular use.
• Ensure the screen is hanging freely and not pressing against any uneven surfaces.

Chemical Odor:

• A slight chemical odor may be present when the product is new, due to manufacturing and packaging. This is normal and typically dissipates within a day or two in a well-ventilated area.

Loud Mechanism Noise:

• The retraction mechanism may produce some noise during operation. This is part of the design and does not indicate a malfunction.

spésifikasi

Garansi sareng Rojongan

For warranty information or technical support regarding your tectake Projector Screen, please contact the manufacturer or the seller directly.

Penjual: TecTake GmbH

Punten tingal dokuméntasi pameseran anjeun pikeun istilah jaminan khusus sareng detil kontak.